Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
...... 52 2 English Stopper Lid Rubber intermediate ring Spout Glass jar Graduations Rubber sealing ring Knife unit Drive shaft Cord storage (see fig. 14) Motor unit Speed control with 7 speed settings On/Off switch with pulse position I = On O = Off M = Pulse position Filling hole W ORKSH O P 1 Philips and Alessi worked together to create a unique line of electric kitchen appliances, uniting the best in form and function. This is a jubilee model to celebrate the success of the Philips Alessi line, consisting of a toaster, coffee maker, kettle and a citrus press. Assembly -Clean all detachable parts first (see Cleaning”). -Place the knife unit onto the motor unit (fig. 2). Turn it until it is properly fixed. It may lock into position at two points. 2 -Put the rubber sealing ring on the inside edge of the knife unit (fig. 3). 3 -Place the glass jar on the knife unit and fasten it by turning the handle (fig 4). -Snap the rubber intermediate ring into the lid (fig. 5). 4 5 -After you have put the ingredients in the jar, put the lid onto the jar and press it home. Make sure the recess in the lid is directly opposite the handle (fig. 6). -Fit the stopper into the filling hole in the lid (fig. 7). Disassembly takes place in reverse order and direction. Automatic safety system 6 7 The appliance has been equipped with an automatic safety system that switches off the motor when the jar has not been (correctly) assembled. Note: Do not switch the appliance on and off by turning the jar! Use -Make sure that you have put the plug in the wall socket and fastened the jar onto the motor unit before you switch the appliance on. -Set the speed control switch to the setting appropriate for the ingredients you wish to process. The seven speeds are indicated by means of dots (fig. 8). The larger the dot, the higher the speed. 1-3 7 4-6 8 Speed For: 1 - 3 light blending jobs involving liquids (e.g. chocolate milk) 4 - 6 processing of firmer ingredients, involving the blending of liquids and solids 7 heavy blending jobs, involving the processing of mainly solid ingredients 3 -Switch the appliance on by flipping the on/off switch to I (fig. 9). • If you are not sure which speed to use, you can always choose the highest speed (i.e. the largest dot). If necessary, you can switch to a lower speed during processing. - If you want to run the appliance only briefly, move the switch to pulse position M and let go of it (fig. 10). -To switch the appliance off, move the switch to position O (fig. 11). 10 11 9 After use Note: If you want to pour out the contents of the jar, lift the glass jar, with the knife unit still attached to it, off the motor unit (fig. 12)! Never detach the jar from the knife unit when it is filled. If you were to do so, the contents would flow out at the bottom. 12 Tips • The filling hole in the lid can be used to add ingredients while the blender is running (figs. 13a and 13b). • You tend to get finer results if you allow the blender to run a little longer (max. 3 minutes). Dry ingredients should not be processed for more than 1 minute. • Cut meat and other solid ingredients into pieces before putting them in the jar. • If you want to process solid ingredients, put 13a 13b them in the jar in small portions. • If the appliance runs too slowly, switch it off and -set the on/off switch to pulse position M a few times, or -stir the ingredients with a spatula (when the appliance is switched off!), or -pour some of the contents out of the jar. • To crush ice cubes: drop the ice cubes via the filling hole onto the rotating knife. • For tomato juice: quarter the tomatoes and drop the tomato quarts via the filling hole onto the rotating knife. Cleaning • Do not clean the appliance, the knife unit, the glass jar and the other parts in a dishwasher. • Cleaning is easiest when done immediately after use. -Assemble the knife unit and the jar onto the motor unit in the manner described under “Assembly”. -Pour lukewarm water and some washing-up liquid into the blender jar. - Run the appliance briefly. - Unplug the appliance. -Disassemble the blender jar with the knife unit still attached and rinse it with clean water. -Disassemble the knife unit from the jar and rinse it under the tap. Be careful: the knife edges are very sharp! - The motor unit can be cleaned with a moist cloth. Do not use abrasives, scourers, alcohol etc. 4 Cord storage You can store excess cord length by winding it round the reel in the base of the appliance (fig. 14). Fix the cord at the required length by pressing it in the slot at the back of the appliance. 14 2 1 Important • Read the instructions for use and study the illustrations before you start using the appliance. • To prevent damage: check if the voltage indicated on the appliance corresponds to the local mains voltage (110-127 V or 220-240 V) before connecting the appliance. • Keep the appliance away from children. • Never leave the appliance alone when it is turned on. • Never fill the jar with ing...