Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
2. Avoid contact with moving parts. Keep hands, hair and clothing, as well as spatulas, bowl scrapers and other utensils away from blades, hooks, whisk, beater and discs during operation to prevent injury and/or damage to the power unit or accessories. 3. Always work with the bowl lid cover fitted in place. 4. Do not change tools until the power unit has come to a complete stop; when switched Off, the power unit will continue to turn for a brief period. 5. Always place protective cover on multifunction blade when it is not in use. 6. Always grasp multifunction blade by top of center column. Do not grip by the blades. The Bosch Food Processors are provided with a three-quart mixing bowl and multifunction blade, beater or whipping whisk, dough hook, reversible slicing disc, reversible coarse grating disc and fine grating disc (MCM 5200 UC only) as shown in figure 5. How to Use Multifunction Blade All the MCM models comes with the mixing bowl, cover and pusher/measuring cup and multifunction blade. The multifunction blade is intended to be used for mincing, pureeing and pulverizing of fruits, vegetables, nuts and dried bread (preparation of bread crumbs) and the preparation of sauces, special diet foods, infant foods and mixing. The multifunction blade should not be used to process hard cheeses (Parmesan, Romano, etc. Use of mixing bowl with multifunction blade Before beginning to attach this or any other attachment, make sure that the power unit is on a smooth, clean, suitable work surface and switched to the Off position, “O/Off,” and that you have the safety motor drive cover in place of the high speed, blender drive. 1. Before using the mixing bowl and multifunction blade for the first time they should be washed. See Before Using for the First Time, on page 4. 2. Make sure the safety motor drive cover has been snapped into place on the high-speed blender drive. Place the mixing bowl on the dual drive of the power unit, as shown in figure 4a, and turn the bowl clockwise with a slight downward pressure until bowl is firmly seated. 10 Figure 5. 5a. Cover w/dual feeding tubes 5b. Cover w/integral feeding tube 5c. Pusher/measuring cup 5d. Multifunction blade w/protective cover 5e. Dough hook 5f. Whipping whisk 5g. Fine grating disc 5h. Reversible slicing disc 5i. Reversible coarse grating disc 5j. Dough hook 5k. Whipping whisk 3. Engage the multifunction blade on the dual drive of the power unit by placing it over the center column, as shown in figure 6a. Once in place, check to make sure the multifunction blade has engaged the dual drive by turning the multifunction blade while pushing down until it stops. 4. Next place the mixing bowl cover on the bowl. Make sure arrows on cover and bowl are aligned, so that tabs on bowl fit into channels in cover and then turn cover clockwise until tab on cover enters cover interlock and turn until tab clicks into place, figure 6b. Figure 6. The cover should be in place whenever the power unit is in operation. The cover serves to prevent accidental contact with the moving blade. Also, the power unit will not operate unless the tab on the cover is in place and has engaged the safety cover interlock. Placing into Operation w/Multifunction Blade Make sure that the power unit is on a smooth, clean, suitable work surface and switched to the Off position, “O/Off.” Pull the electrical cord out to the necessary length and plug into a convenient outlet. The mixing bowl with multifunction blade is now ready for operation. The multifunction blade should only be used using the momentary contact position ”M” to prevent over processing of food. Sample recipes may be found in the recipe section, at the back of this manual. 11 How to Use Dough Hook All the MCM models come with the mixing bowl, cover and pusher/measuring cup. The MCM 5200 comes with a dough hook, as shown in figure 5e, while the MCM 5100 and 5200 comes with the dough hook as shown in figure 5j. Both of these dough hooks are intended to be used to knead yeast doughs and to mix cookie and pastry doughs, and also when adding nuts, chocolate chips, dried fruit, hard butter or shortening, hardened brown sugar, etc. to batters. Use of mixing bowl with dough hook Before beginning to attach this or any other attachment, make sure that the power unit is on a smooth, clean, suitable work surface and switched to the Off position, “O/Off,” and that you have the safety motor drive cover in place of the high speed, blender drive. 1. Before using the mixing bowl and dough hook for the first time they should be washed. See Before Using for the First Time, on page 4. 2. Make sure the safety motor drive cover has been snapped into place on the high-speed blender drive. Place the mixing bowl on the dual drive of the power unit, as shown in figure 4a, and turn the bowl clockwise with a slight downward pressure until bowl is firmly seated. 3. Engage the dough hook on the dual drive of the power unit by placing it over the center column, as was d...
Эта инструкция также подходит к моделям:Блендеры - MCM 5000m (1.43 mb)
Блендеры - UC MCM 5200 (1.43 mb)