Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
This may cause personal injury or damage to the product. • Close supervision is necessary when using this appliance near children. • Unplug from outlet when not in use, before putting on or taking off parts and before cleaning. • Do not contact moving parts. • Do not operate food processor with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized Sunbeam service center for examination, repair or mechanical adjustment. • The use of attachments not recommended or sold by the manufacturer may cause fire, electrical shock or injury. • Do not let cord touch hot surfaces or hang over table edges or counters. • Do not use your food processor if any part is broken. • Do not use outdoors or for commercial purposes. • Keep hands and utensils away from moving blades or discs while processing food to reduce the risk of severe injury to persons or damage to the food processor. A scraper may be used but must be used only when the food processor is not running. • Blade and processing disk are sharp. Handle carefully. • To reduce the risk of injury to persons, never place cutting blade on motor base without first putting container properly in place. • Be certain container cover is securely locked in place while operating appliance. • Never feed food into food chute by hand, always use the food pusher. • Be sure to turn switch to OFF position after each use. • Do not use this appliance for other than its intended use. EXTENSION CORD USE A short power-supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord. An extension used if care is exercised in its use. If an extension cord is used, the rating of the cord must be at least as great as the electrical rating of the appliance. The extension cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally. POLARIZED PLUG INFORMATION This appliance has a polarized plug (one blade is wider than the other) . To reduce the risk of electric shock this plug will one way. If the plug does not fit fully into the outlet, reverse it. it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature by modifying THIS UNIT IS FOR HOUSEHOLD USE ONLY SAVE THESE English- WELCOME Congratulations on your purchase of an OSTER ® Food Processor! To learn more about OSTER ® products, please visit us at FOOD PROCESSOR FEATURES FOOD CHUTE BLADE SHAFT FOOD PUSHER BOWL MOTOR BASE DRIVE SHAFT TOUCH-PAD CONTROL BUTTONS SLICING/ SHREDDING DISKCHOPPING BLADE COVER SWITCH PANEL COVERFor Models 3200, 3212 Control panel varies slightly for Model 3220 The following accessories are included with Model 3212. Assembly order shown below. On Pulse Off PIZZA DOUGH 1 cup warm water (between 85°F – 115°F : 30°C – 46°C) 2 tablespoons yeast 2 tablespoons honey 1/4 cup olive oil 1/2 teaspoon salt 3-1/2 cups flour Place dough blade on drive shaft. Place all flour in food processor. Add the yeast. Lock the lid in place. Dissolve honey and salt in warm water and pour mixture in slowly while the food processor is running. Mix for approximately 60 seconds. Add the olive oil and mix until blended (approximately 1 – 2 minutes more) . The dough will turn into ball and will roll around the BLADE SHAFT SHREDDING DISK SLICING/ DOUGH BLADE FRENCH FRY CUTTER SPATULA STORAGE CASE English- ASSEMBLING YOUR OSTER ® FOOD PROCESSOR Clean Before First Use A) Bowl, cover, food pusher, disk blade, french fry cutter, chopping blade and dough blade: THE BLADES ARE EXTREMELY SHARP. USE CAUTION HANDLING BLADES. Before you begin, PLEASE BE SURE THAT THE ELECTRIC CORD IS UNPLUGGED. 1. Set food processor on a dry, level surface with the control buttons on the motor housing to the front. 2. FOR MODELS: 3200, 3212 Place the bowl without the cover with the handle left of switch panel over the drive shaft on the motor base. Rotate the bowl until it drops down evenly on the base. Hold handle and turn the bowl counterclockwise until it locks firmly into position.The bowl handle will be positioned above the control buttons. FOR MODEL: 3220 Place the bowl without the cover with the handle directly above the switch panel over the drive shaft on the motor base. Rotate the bowl to the right until it drops down evenly on the base. Hold handle and turn the bowl counterclockwise until it locks firmly in place. The handle will be positioned to the right, above the switch interlock platform. NOTE: Each time you re-assemble your food processor, be sure to attach the bowl first and lock it into position. Then, attach the cover. 3. Place the chopping blade or dough blade over the drive shaft, rotating it slightly until it drops into place. Add the ingredients. THE BLADES ARE EXTREMELY SHARP. USE CAUTION HANDLING BLADES. 4. FOR MODELS: 3200, 3212 Attach the cover onto the bowl so that the f...