Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
. Keep the appliance out of the reach of children. . Never let the appliance unattended. . The motor only starts if the blender jar or the mill attachment has been correctly assembled onto the motor unit. . Make sure the blade unit is securely fastened onto the mill beaker before you screw the mill attachment onto the motor unit. . Never touch the blade unit when it is assembled on the appliance and the appliance is plugged in. . Avoid touching the cutting edges of the blade units when cleaning them.They are very sharp and you could easily cut your fingers on them. . Do not exceed the maximum levels indicated on the accessories. . Do not exceed the quantities and preparation times indicated at each recipe processing. Important Read these instructions for use carefully and look at the illustrations before using the appliance. Keep these instructions for future reference. General . Check if the voltage indicated on the appliance corresponds to the local mains voltage before you connect the appliance. . If the mains cord is damaged, it must be replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard. . Always unplug the appliance from the mains before assembling, disassembling or making adjustments to any of the accessories. . Never switch the appliance on and off by turning the accessories. . Never immerse the motor unit in water or any other fluid, nor rinse it under the tap. Use only a moist cloth to clean the motor unit. . Never let the appliance run unattended. . Keep the appliance out of the reach of children. . Avoid touching the blades, especially when the appliance is plugged in.The blades are very sharp! . Never reach into the blender jar with your fingers or an object while the appliance is running. ENGLISH . Never place the blade unit onto the motor unit without having the (blender or mill) jar properly attached. . If the blades get stuck, unplug the appliance before removing the ingredients that are blocking the blades. If necessary use a spatula to remove food from the wall of the jar after you have switched off the appliance. . Always make sure that the blade unit is correctly assembled before you plug the appliance in and switch it on. . Never use any accessories or parts from other manufacturers that have not been specifically advised by Philips.Your guarantee will become invalid if such accessories or parts have been used. Blender . Never fill the blender jar with ingredients that are hotter than 80 cC. . To prevent spillage, do not put more than 1.25 litres of liquid in the blender jar, especially when you are processing at a high speed. Do not put more than 1 litre in the blender jar when you are processing hot liquids or recipes that create a great deal of foam. . Never forget to place the sealing ring on the blade unit before assembling the blender jar, otherwise leakage will occur. . Always make sure the lid is properly closed and the measuring cup has been inserted properly before you switch the appliance on. Mill . Never use the mill for more than 30 seconds without interruption.Allow the mill to cool down for at least 1 minute between the processing cycles. . Never forget to place the sealing ring in the blade unit before you assemble the mill jar, otherwise leakage will occur. . Never use the mill to grind very hard ingredients such as nutmeg, Chinese rock sugar and ice cubes. . Always process cloves, star anise and aniseed together with other ingredients. If processed separately, these ingredients may attack the plastic materials of the appliance. . The mill beaker may become discoloured when the mill is used to process ingredients such as cloves, anise and cinnamon . The mill is not suitable for chopping raw meat. Use the blender instead....
Эта инструкция также подходит к моделям:Блендеры - HR1721 (508.39 kb)
Блендеры - HR1724 (508.39 kb)
Блендеры - HR1727 (508.39 kb)