Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
2. To protect against risk of electrical shock, do not put cord, plug, or appliance in water or other liquid. 3. Close supervision is necessary when any appliance is used by or near children. 4. Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning. 5. Avoid contacting moving parts. 6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Contact Consumer Service for examination, repair or electrical or mechanical adjustment. 7. The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock or injury. 8. Do not use outdoors. 9. Do not let cord hang over edge of table or counter. 10. Do not let cord contact hot surface, including the stove. 11. Keep hands and utensils away from moving blades or discs while processing food to reduce the risk of severe injury to persons or damage to the Food Processor. A scraper may be used, but must be used only when the Food Processor is not running. 12. Blades are sharp. Handle carefully. 13. To reduce the risk of injury, never place cutting blade or discs on base without first putting bowl properly in place. 14. Be certain Cover is securely locked in place before operating appliance. 15. Never feed food by hand. Always use food pusher. 16. Do not attempt to defeat the cover interlock mechanism. SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY. 2 Additional Important Safeguards 1. All users of this appliance must read and understand this Owner's Manual before operating or cleaning this appliance. 2. The cord to this appliance should be plugged into a 120V AC electrical outlet only. 3. Do not leave this appliance unattended during use. 4. If this appliance begins to malfunction during use, immediately turn the unit OFF and unplug the cord. Do not use or attempt to repair the malfunctioning appliance. 5. If this appliance falls or accidentally becomes immersed in water, unplug it immediately. Do not reach into the water! Do not use this appliance after it has fallen into or becomes immersed in water. 6. To reduce the risk of injury to persons or property, never use this appliance in an unstable position. 7. Do not use this appliance for other than its intended use. Polarized Plug This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way. Electric Power If the electrical circuit is overloaded with other appliances, your appliance may not operate. It should be operated on a separate electrical circuit from other appliances. Plasticizer Warning CAUTION: To prevent Plasticizers from migrating from the finish of the countertop or tabletop or other furniture, place NON-PLASTIC coasters or placemats between the appliance and the finish of the countertop or tabletop. Failure to do so may cause the finish to darken, permanent blemishes may occur or stains can appear. 3 Getting to Know Your Rachael Ray RRFP1A/T Food Processor 1. Food Processor Power Base 14 2 4 6 7 9 11 1 12 10 2. Interlock Mechanism, Lower 3. Handle 4. Interlock Mechanism, Upper 5. Locking Extension 6. Food Pusher (P/N 71163) 7. Cover with Feed Chute (P/N 71162) 8. Rubber Seal Ring (P/N 71201) 9. Processing Bowl (P/N 71161) 10. Drive Shaft 11. Speed Control Dial 12. Cord 13. Cord Storage (not shown) 14. Spatula (P/N 71164) 3 5 8 13 4 Getting to Know Your RRFP1A/T Attachments 32 4 5 1 6 7 8 P 0FF 1 2 1. Chopping Blade (P/N 71165) Stainless steel blade designed for cutting and kneading. 2. COARSE Shredding Blade 'C' (P/N 71167) Stainless steel shredding blade. 3. Cheese Grating Blade 'CHEESE' (P/N 71198) Stainless steel blade designed to finely grate fresh cheese. 4. THIN Slicing Blade 'F' (P/N 71168) Stainless steel slicing blade. 5. THICK Slicing Blade 'C' (P/N 71169) Stainless steel slicing blade. 6. Blade Holder (P/N 71170) Designed to hold a Shredding or Slicing or Cheese Blade, with finger holes. 7. Blade Holder Stem (P/N 71183) Fits over Drive Shaft to support Blade Holder. 8. Storage Tray (P/N 71199) (Shown with attachments in place) CONTROL DIAL Holds 4 unused Blades with Indicator and Blade Holder Stem. Light P - Pulse OFF 1 - Low Speed 2 - High Speed 5 Before First Use WARNING: Blade Attachments are very sharp. Use extreme care when handling Blades. Failure to do so can result in personal injury. 1. Carefully unpack the Food Processor. The Storage Tray is packed with 4 Blades and the Blade Holder Stem. Wash the Processing Bowl, Cover with Feed Chute, Food Pusher, Spatula and all Attachments in warm soapy water. Rinse and dry thoroughly. 2. Wipe the Food Processor Power Base with a soft, moistened cloth. Never immerse the Food Processor Power Base in water or any other liquid....