Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
30182044, 3018204-2 & 3018204-3). 1.2 TOTAL BLENDER CERTIFICATION TOTAL BLENDER and its accessories are certified by NSF International (NSF), under the letter K (for K-TEC) in the NSF Official Listing. 1.3 AVOID CONTACT WITH MOVING PARTS • Keep fingers, hands, hair and clothing away from all moving parts. • Keep all utensils away from the drive socket and blender blades during operation. Metal utensils will damage blades. • NEVER put hands into blender jar or add substances by hand when the blender is operating. • NEVER place jar into drive socket if blender motor is operating. • DO NOT rock the blender during operation. These precautions will prevent personal injury and/or damage to the blender. 1.4 NEVER OPERATE THE BLENDER IF IT APPEARS DAMAGED If the blender malfunctions call your service agent first. If it is dropped or damaged in any way, return the blender to a Blendtec service agent immediately for examination, repair, electrical or mechanical adjustment, or possible replacement. 1.5 NEVER OPERATE BLENDER IN LIQUID Do not operate the blender motor in water or any other liquid. Avoid all contact between the motor and water. Do not use the blender outdoors where it is subject to precipitation. 1.6 NEVER PUT NON-FOOD ITEMS INTO JAR Metal utensils, rocks and glass are dangerous if placed in jar. Damage caused by such foreign objects will void the warranty. Keep hands and utensils out of jar while blending to reduce the risk of severe injury to persons or damage to the blender. Utensils may only be used when the blender is not running. 1.7 NEVER OPERATE THE BLENDER WITHOUT THE LID IN PLACE TB-1 1.8 NEVER OPERATE THE BLENDER USING ATTACHMENTS NOT SOLD BY BLENDTEC The use of any unauthorized attachments may cause fire, electric shock, and/or injury and will void the warranty. 1.9 CONTAINER MUST BE PROPERLY IN PLACE WHILE APPLIANCE IS OPERATING 1.10 BLADES ARE SHARP! HANDLE CAREFULLY! 1.11 WHEN BLENDING HOT LIQUIDS, REMOVE CENTER PIECE OF LID 1.12 POWER CORD PRECAUTIONS • NEVER operate with a damaged cord or plug. (If the supply cord is damaged it must be replaced by the manufacturer, or authorized service agent to avoid a hazard • DO NOT permit the cord to hang over the edge of the work surface. • NEVER use an extension cord with the unit. • Unplug the blender motor when not in use; before changing blender locations; or cleaning. 1.13 NEVER ATTEMPT TO REPAIR THE POWER UNIT Never remove the blender motor cover. The blender motor does not contain self- adjustable or serviceable parts. A qualified service agent must make all service adjustments. Removing the cover or attempting to service the blender will void the warranty. 1.14 TURN THE POWER SWITCH OFF WHEN NOT IN USE The Power Switch (ON/OFF switch) is located on the back of the blender motor cover. 1.15 AVOID TOUCHING THE BLENDER DRIVE SOCKET AFTER EXTENSIVE USE. The blender drive socket may become hot after numerous cycles. 1.16 CLOSE SUPERVISION IS NECESSARY WHEN APPLIANCE IS USED BY OR NEAR CHILDREN. 1.17 THE TOTAL BLENDER IS INTENDED FOR HOME USE ONLY! ANY USE OF THE TOTAL BLENDERTM FOR COMMERCIAL PURPOSES VOIDS ALL WARRANTIES. SAVE THESE INSTRUCTIONS TB-2 SECTION 2 SAVE ALL PACKAGING MATERIALS AND INSTRUCTIONS FOR FUTURE USE. 2.1 UNPACKING YOUR BLENDER You should have received the following items: • TOTAL BLENDERTM motor base • Blender jar with lid • Recipe book 1. Remove blender motor, blender jar and lid from packaging. 2. Unwind the power cord. 3. Check for any packing material that may have blocked ventilation holes in the blender motor. 4. Inspect all items to ensure no damage occurred in shipment. 5. If any damage has occurred contact your Blendtec service agent immediately. 2.2 RECORDING YOUR SERIAL NUMBER AND DATE OF PURCHASE Record your blender motor serial number and date of purchase in the space below. You will need these when contacting Blendtec for service or questions. Motor Serial #: (Found on bottom of motor base) Date of Purchase: Purchased From 2.3 REGISTRATION OF YOUR BLENDER Register online at (select “Product Registration” under the Support button) or return the registration card to the address provided. TB-3 SECTION 3 TOTAL BLENDER OVERVIEW (Refer to Figures 1 and 2) 3.1 BLENDER MOTOR • Motor Cover: Houses the power unit in a durable, easy-to-clean polycarbonate. • Touch Pad: Consists of six buttons that contain pre-programmed settings for selective blender control, a pulse button, and two speed control buttons. • LCD Information Center: will indicate status of unit as well as overload or over-temperature conditions. • Power Unit: This unit is located within the blender motor and contains the machinery that runs the blender. • Power Switch: Located on the back lower-right corner of the power unit. 3.2 BLENDER JAR ASSEMBLY The blender jar assembly consists of the blender jar, blade assembly, and lid. • Jar: Made from polycarbonate to provide maximum efficiency and clear visibility of blender performance. • Blade ...