Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Before using it, please confirm your mobile phone complies with Bluetooth V1.1/ V1.2 and supports the Bluetooth Headset or Handsfree Profile. 2. Package List Please inspect the product you purchased. Refer to the below package list to make sure there is no shortage or defect inside. The complete package includes the following items: > HCB16 Bluetooth Headset...............1 > UserGuide........................................1 > Warranty Card ..................................1 > TravelCharger(INPUT:AC100-240V,50/60Hz,OUTPUT: DC5.1V, 120mA) .............................1 > Hanging Strap...................................1 If you find any shortage, please contact the retailer shop where you purchased this product. 3. Product Introduction Function (Answering/ Ending/ On/ Off) Button 3 LED (Indicator) Light Receiver (Speaker) Microphone Power Interface adapter (charging) Ear Hook Decrease Volume key (-) 1 Increase Volume key (+) 2 Note: . For first time use, make sure to fully recharge the Headset battery. 4. Charging the Headset HCB16 comes with a Lithium Polymer battery built-in. 1. Plug the travel charger into the power socket. 2. Plug the end of the travel charger into the power interface adapter of the Headset. 3. While charging, the indicator will turn red; when charging is completed,theredindicator willshut off orflashesred. Note: Charging time is around 90~120 minutes. . Forfirsttimeuse,makesuretofullyrechargetheHeadsetupto 4 hours. After a long time of not using it (around one month), while recharging, it takes a while for the indicator to turn red. . While charging,please do not usetheHeadset. . Pleaseuse the original chargerto recharge the Headset. . When the indicator flashes the red light, it means the battery is low, please recharge the Headset right away. . PleaserechargetheHeadsetwithinthetemperaturerangeof -10 . (+14.) +45. (+113.). 5. Power On/ Off 1. Press and hold the function button for 2~3 seconds, the power will turn on after the indicator flashes the bluelight3times. 2. To turn the power off, press and hold the function button for 2~3 secondsuntilyou see the red indicatorflash 3 times. Note: . WhileturningtheHeadseton,youwillhearthe“DuDu”sound from the receiver. The blue indicator light will flash 5 times, then 2 times, and after repeating this for 5 times, the indicator will flash the blue light every 3 seconds to come into a standby mode. . While the Headset is turned on, it will automatically search for the paired device. Under “ON” mode and within the effective rangeof10metersfromtheHeadset,theindicatorwillflashthe blue light to indicate that it entered the connecting mode. . Whenturningtheheadsetoff,youwillhearone“Bi”soundfollowedbytwo“ Du”sounds,thentheindicatorwillshutoffafter flashingthered light fora fewtimes. 6. Pairing the Headset (or any Bluetooth Device) You must pair the Headset with your Bluetooth phone or any Bluetooth device before youuse the Headsetfor the firsttime. 1.Ensure the Headset is off. 2.Press and hold the function button for 5 seconds until the blue indicator light flashes with the red indicator light to enter the pairing mode. 3.Ensure your mobile phone has the Bluetooth function and start the Bluetooth new device searching function. Please follow the instructions of your mobile phone to proceed the operation. 4.When your mobile phone is in the stage of searching a new Bluetooth device,it willfind HCB16. 5. Pleasechoose and confirm HCB16. 6. Key in the Headset Password “0000” and press YES. If the pairingissuccessful,theindicatorturnstoflashthebluelight only. For some mobile phones, after pairing you may have to select and confirm HCB16 again to start the connection. (Please read your mobile phone manual carefully to take the right steps.) 7.The Headset is in the standby mode, you can start to receive and make call. Note: . If the pairing is not successful, the Headset will return to the standby mode, please repeat the pairing process to try the pairing again. . While pairing, it is better to keep the distance between the mobile phone and Headset around 10 cm to 1m and make sure no metal objects are between. . While pairing the Headset with other Bluetooth device, when the device asks for the Password, please key-in “0000”. For more details, please check the manual of your Bluetooth device to proceed the operation. . Eventhoughthefollowingsituationshappen,thepaireddevices remain pairing. -The power for one of the devices is off. -The service for one of the devices is off. -One of the devices is re-switched on. 7. Wearing the Headset According to your preference, adjust the headset on your left or right ear. 8. Answering the calls 1. While there is a call coming, wait until you hear the ringing from your Headset receiver to press the function button to answer the call. 2. If the mobile phone is ringing first, wait until the Headset is ringing, then press the function button. 3. While answering the calls, the blue indicator light flashes 4 times each second. 4...