Оценок - 4, средний балл: 3.8
(
)
)
|
Фото и характеристики Jabra HALO2 |
Фрагмент инструкции
If your device gets wet, it should be wiped clean of any traces of water in order to protect it from potential damage. GettInG started follow these three steps before using your headset: 1. Charge your headset (approximately 2 hours) 2. Activate Bluetooth on your mobile phone (refer to the manual for your mobile phone) 3. Pair your headset to your mobile phone CharGInG your Jabra haLo2 make sure that your Jabra HaLO2 is fully charged before you start using it for the first time While charging, the battery indicator changes from red to green, when fully charged Charging time is approximately 2h you can use the Jabra HaLO2 during recharge Please note: The lifetime of the battery will be significantly reduced if your device is left uncharged for a long period. Jabra therefore recommends that you recharge your device at least once a month. Jabra HaLO2 turnInG your Jabra haLo2 on and off unfolding the headset will turn it on . folding the headset will turn it off . -To fold: Carefully extend the headset at the hinges (3) and fold . The headset will now conveniently fold into a compact size -To unfold: Carefully unfold the headset and lock the hinges into place The headset will automatically turn off after 10 minutes if not connected to a device PaIrInG your Jabra haLo2 to a Phone or other devICe Headsets are connected to phones or other bluetooth devices using a procedure called ‘pairing’ by following a few simple steps, pairing can be done in a matter of seconds 1. Put the headset in pairing mode 1 a first time pairing -fold and unfold the headset and the Jabra HaLO2 will automatically enter pairing mode (indicator light (5) is solid blue) and start searching for a device 1 b Later pairing - Press and hold the answer/end button (1) until the indicator light (5) is solid blue (approximately 4 seconds) 2. Set your Bluetooth phone or device to search for the Jabra HALO2 -follow your phone’s instruction guide first make sure that bluetooth is activated on your mobile phone Then set your phone to search for the headset This usually involves going to a ‘setup,’‘ connect’ or ‘bluetooth’ menu on your phone and selecting the option to search for or ‘add’ a bluetooth device * 3. Your phone will find the Jabra HALO2 -The phone will find the headset under name “Jabra HaLO2” -your phone then asks if you want to pair with the headset -accept by pressing ‘yes’ or ‘Ok’ on the phone and confirm with the passkey or PIn = 0000 (4 zeros) your phone will confirm when pairing is complete Jabra HaLO2 * refer to phone’s user manual WearInG styLe Please note the left/right wearing indicators inside the headband alternatively always wear the Jabra HaLO2 with the answer/end button on you right adapt the size of your Jabra HaLO2 by extending the length of the headband by the speakers hoW to The Jabra HaLO2 is easy to operate The answer/end button performs different functions depending on how long you press them: Instruction Duration of press Tap Press briefly double tap Touch briefly two times within 0,5 seconds Press approximately: 1 second Press and hold approximately: 4 seconds Play music (Some phones may require you to start a media player first)* -Tap the answer/end button (1) Pause music -Tap the answer/end button – tap again to resume playing Answer a call when playing music -When listening to music and receiving a call, the music will pause and you will hear your ringtone -Tap the answer/end button and the music will be paused and the call will be connected End a call -Tap the answer/end button to end an active call - when you end the call, your music will start again** Jabra HaLO2 * refer to phone’s user manual ** device dependent Skip one track forward -double Tap on the + end of the touch control (2) - continue tapping to skip several tracks forward Skip one track back -double Tap on the – end of the touch control (2) - continue tapping to skip several tracks backward Answer a call -Tap the answer/end button (1) to answer a call End a call -Tap the answer/end button (1) to end an active call Reject a call** -Press and hold the answer/end button when the phone rings to reject an incoming call depending on your phone settings, the person who called you will either be forwarded to voice mail or hear the busy signal Make a call** -When your Jabra HaLO2 is connected to your phone, all calls made from your phone will automatically be transferred to your headset (subject to phone settings) Redial last number** -double tap the answer/end button Adjust sound and volume* -Touch and slide your finger along the touch control (2) to turn volume up or down Mute microphone when on a phone call -double Tap on – or + on the touch control (2) Tap the touch control to un-mute Using your Jabra HALO2 with the 3.5mm music cable (not Bluetooth) -Insert the 3 5mm music cable into the micro-usb socket and connect the 3 5mm jack to the device -using your Jabra HaLO2 with the 3 5mm music cable is not possible if the battery is completely discharged, so m...