Оценок - 5, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
Important! Please read this entire chapter. It contains important safety information. Package Contents • Actiontec Wireless Bluetooth Headset • Power Adapter • Installation mini-CD (include User Manual) • Earpads • Quick Start Guide • Accessory bag 1 Actiontec Wireless Bluetooth Headset User Manual Features The Headset features two buttons (Large and Small), which have various functions, as well as two lights (LEDs), red and blue. Putting On the Headset You can wear the Wireless Bluetooth Headset on either ear. The ear brace is detachable from the earpiece section of the Headset. Simply remove it from the Headset and set it in the appropriate direction to fit your ear. 2 Chapter 1 Introduction Technical Support Actiontec Electronics prides itself on making durable, high-quality, high-performance products. If you need assistance, the Actiontec Technical Support Department is available 24 hours a day, seven days a week, to provide professional support. Actiontec Electronics, Inc. 760 N. Mary Avenue Sunnyvale, CA 94085 Technical Support Phone: 1-888-436-0657 E-mail: Internet: 3 Actiontec Wireless Bluetooth Headset User Manual 4 Using the Wireless 2 Headset This chapter contains instructions on how to use the Headset, including charging the Battery and connecting to a Bluetooth-enabled cellular phone. Charging the Battery The rechargeable battery included with the Headset is not fully charged when new, and must be recharged before using. Recharging the first time takes approximately 4 hours; afterwards, each full battery recharge will take approximately 2 hours. A fully charged battery will provide approximately 3 to 4.5 hours of talk time, and 100+ hours of standby time. To recharge the battery: 1. Plug the battery charger into a wall outlet. The green light on the charger will illuminate. 2. Connect the other end of the battery charger into power port on the bottom of the Headset. A click is heard when the charger is properly inserted in the power port, and the red light on the charger will illuminate. 3. When the battery is full, the red light will turn off. Turning the Headset On/Off Turning On To turn the Headset on, press and hold the Large Button for three seconds. Two short, high-pitched tones will sound, then the blue light on the Headset will illuminate. The Headset is now turned on. Note:If the Headset’s rechargeable batter is low, the red light on . the Headset will flash. 5 Actiontec Wireless Bluetooth Headset User Manual Turning Off To turn the Headset off, press and hold the Large Button for three seconds. Two short, low-pitched tones will sound, then the red light will flash. When it stops flashing, the Headset is turned off. Pairing the Headset To use the Headset with a cellular phone, it must be paired with the phone. To do this: 1. Press the Large Button for 5 seconds. Two high-pitched tones will sound, followed by two more tones, and then the red and blue lights will flash. 2. Initiate the pairing procedure on the Bluetooth-enable cellular phone to pair with the Headset. Make sure the cellular phone is in discovery mode. 3. Place the Headset one to three feet from the cellular phone. 4. When the cellular phone requests a passkey, enter 1234 (the default PIN of the Headset). When pairing is successful, the red light will turn off, and the blue light will illuminate. If the pairing fails, the Headset will turn off automatically after two minutes. About Pairing Pairing is the process of associating Bluetooth devices with each other. When two devices are paired, they establish a permanent, secure link with each other, enabling quick access to services provided without having to enter passwords every time either device is activated. Paired devices remain paired even when one of the devices is not powered up, the service connection is stopped or interrupted, or one or both of the devices are rebooted. 6 Chapter 2 Using the Headset Handling Calls Once the Headset is successfully paired with a cellular phone, you can use it to make and receive calls. If your cellular phone suppors voice dialing, you can perform this with the Headset. Making Calls There are two ways to make a call, using the Headset: keying in the number on the cellular phone dial pad, or using voice dialing (if the cellular phone supports this feature). Using the Dial Pad To use the dial pad on the cellular phone, dial the phone number. Once the call is placed, the conversation will be carried by the Headset. Using Voice Dialing To use voice dialing, press the Large Buttone until a beep is heard. Say the name of the person to be called. The call is placed. Answering/Ending Calls When an incoming call is received, a beep is heard, and the blue light will flash quickly. To answer: 1. Press the Large Button. 2. If needed, adjust the volume. Press the Large Button to increase the volume; press the Small Button to decrease the volume. 3. To end the call...
Эта инструкция также подходит к моделям:Беспроводные гарнитуры и прочие аксессуары - BTHS-6023-F (1.04 mb)