|
Инструкция по эксплуатации Nokia, модель BH-703
Перейти к скачиванию
Фрагмент инструкции
To change the earplug, pull the current earplug from the earpiece (1), and push the new earplug over the earpiece in the same position (2). 12 ¦ Place the headset on the ear The headset is provided with an earloop. To use the headset without the earloop, gently push the earpiece into your ear (1), and point the headset toward your mouth. © 2008 Nokia. All rights reserved. Basic use To use the headset with the earloop, insert the earloop into the small opening at the back of the headset (2). To wear the headset on the right ear, rotate the earloop so that the loop is to the right of the Nokia logo. Slide the earloop over your ear (3), and push or pull the earloop to set its length. Gently push the earpiece into your ear, and set the headset so that it points toward your mouth (4). 1234 To use the headset on the left ear, rotate the earloop so that it is to the left of the Nokia logo (5). 5 To detach the earloop, gently pull it from the headset. © 2008 Nokia. All rights reserved. Basic use ¦ Carry the headset in the strap The headset may be provided with a carrying strap. You can use the strap to wear the headset around your neck. To attach the headset to the strap, insert the headset into the catch at the end of the strap. To detach the headset, pull it from the catch. ¦ Calls To make a call, use your mobile device in the normal way when the headset is connected to the device. The blue indicator light flashes during the call. To redial the number you last called (if your mobile device supports this feature with the headset), press the multifunction key twice. To activate voice dialling (if your mobile device supports this feature with the headset), when no call is in progress, press and hold the multifunction key for about 2 to 3 seconds until the mobile device starts voice dialling, and proceed as described in the user guide of the device. When you receive a call, the indicator light flashes blue quickly, and you hear a ringing tone through the headset. To answer the call, press the multifunction key, or use the keys of the mobile device. To reject the call, press the multifunction key twice, or use the keys of the mobile device. To end a call, press the multifunction key, or use the keys of the mobile device. © 2008 Nokia. All rights reserved. Basic use To put a call on hold (or to return to a call on hold), press and hold the multifunction key. To answer a waiting call and put the current call on hold, press and hold the multifunction key. To answer a waiting call and end the current call, briefly press the multifunction key. To switch between the active call and the call on hold, press and hold the multifunction key for about 2 to 3 seconds. To end the active call and activate the call on hold, briefly press the multifunction key. To use these features, your mobile device must support the Bluetooth Hands-Free profile 1.5, and call waiting (network service) must be activated in the device. ¦ Adjust the headset volume Move your finger on the touch-sensitive area toward the multifunction key to increase or toward the microphone to decrease the volume during a call, or use the keys of the mobile device. ¦ Mute or unmute the microphone To mute or unmute the microphone during a call, tap the touch-sensitive area twice with your finger, or use the respective function in your mobile device. + - © 2008 Nokia. All rights reserved. Basic use ¦ Switch the call between the headset and mobile device To switch the call from the headset to a connected device, press and hold the multifunction key for about 4 seconds (the headset switches off), or use the keys of your device. To switch the call back to the headset, switch on the headset (and connect it to your paired device), or press and hold the multifunction key for about 2 to 3 seconds (when the headset is on). ¦ Clear pairings or reset the headset To clear all the pairing settings from the headset when the headset is on, press and hold the multifunction key, and move your finger three times on the touch-sensitive area toward the multifunction key. The indicator light alternates between red, green, and blue twice. After the settings are cleared, the headset enters the pairing mode for about 5 minutes (the indicator light flashes blue quickly). To reset the headset if it stops functioning even though it is charged, plug the charger into the headset while you press and hold the multifunction key. The reset does not clear the pairing settings. © 2008 Nokia. All rights reserved. Battery information 4. Battery information This device has an internal, nonremovable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the device. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with Nokia approved chargers designated for this device. Use of an unapproved charger may present a risk of fire, explosion, leakage, or other hazard. If the battery is completely discharged...
Напишите ваш отзыв об устройстве
|
|