Оценок - 5, средний балл: 4.2
(
)
)
|
Фрагмент инструкции
When prompted for a passkey or PIN, enter 0000. 10 English Tips and Troubleshooting If the headset isn’t responding or working correctly, try these steps in order until it starts working. m Make sure the headset is on. Press the button. If the status light doesn’t blink green, press and hold the button for about three seconds, until you see the status light blink green or hear four rising tones. m Make sure iPhone is turned on. m Make sure the headset and iPhone are charged. m During a call, make sure iPhone is set to play sound through the headset. Tap Audio Source and choose iPhone Bluetooth Headset. m Make sure iPhone is paired with the headset. See page 3. m On iPhone, make sure Bluetooth is turned on. From the Home screen, choose Settings > General > Bluetooth and turn Bluetooth on. m On iPhone, choose Settings and turn Airplane Mode on. Then wait about three seconds and turn it o. again. For more tips and troubleshooting, go to: English 11 ±Read all safety information below and operating instructions before using the iPhone Bluetooth Headset to avoid injury. Important Safety Information WARNING: Failure to follow these safety instructions could result in fire, electric shock, or other injury or damage. Handling the iPhone Bluetooth Headset Do not drop, disassemble or open, crush, bend or deform, puncture, shred, microwave, incinerate, paint, or insert foreign objects into the iPhone Bluetooth Headset. Avoiding Water and Wet Locations Do not use the iPhone Bluetooth Headset in rain, or near washbasins or other wet locations. Take care not to spill any food or liquid on the iPhone Bluetooth Headset. In case the iPhone Bluetooth Headset gets wet, turn it o. (press and hold the button for about four seconds, until the status light blinks amber) before cleaning, and allow it to dry thoroughly before turning it on again. Do not attempt to dry the iPhone Bluetooth Headset with an external heat source, such as a microwave oven or hair dryer. 12 English Repairing the iPhone Bluetooth Headset Never attempt to repair or modify the iPhone Bluetooth Headset yourself. The iPhone Bluetooth Headset does not contain any user-serviceable parts. If the iPhone Bluetooth Headset has been submerged in water, punctured, or subjected to a severe fall, do not use it until you take it to an Apple Authorized Service Provider. Charging the iPhone Bluetooth Headset To charge the iPhone Bluetooth Headset, use only the iPhone Bluetooth Travel Cable with an Apple USB Power Adapter or a high-power USB port on another device that is compliant with the USB 2.0 or 1.1 standards, or another Apple-branded product or accessory designed to work with the iPhone Bluetooth Headset. Read all safety instructions for any products and accessories before using with the iPhone Bluetooth Headset. Apple is not responsible for the operation of third-party accessories or their compliance with safety and regulatory standards. When you use the Apple USB Power Adapter to charge the iPhone Bluetooth Headset, make sure that the power adapter is fully assembled before you plug it into a power outlet. Then insert the Apple USB Power Adapter fi rmly into the power outlet. Do not connect or disconnect the Apple USB Power Adapter with wet hands. Do not use any power English 13 adapter other than the Apple USB Power Adapter to charge the iPhone Bluetooth Headset. Avoiding Hearing Loss Permanent hearing loss may occur if the iPhone Bluetooth Headset is used at high volume. You can adapt over time to a higher volume of sound, which may sound normal but can be damaging to your hearing. Set the volume to a safe level before that happens. If you experience ringing in your ears or speech sounds mu. ed, reduce the volume or discontinue use of your headset and have your hearing checked. The louder the volume, the less time is required before your hearing could be a.ected. Hearing experts suggest that to protect your hearing: A Limit the amount of time you use your headset at high volume. A Avoid turning up the volume to block out noisy surroundings. A Turn the volume down if you can’t hear people speaking near you. In Case of Skin Irritation Headsets can sometimes lead to ear infections if not properly cleaned. Clean the speaker of your iPhone Bluetooth Headset when necessary using water or an 14 English antiseptic, such as isopropyl alcohol, on a slightly damp, lint- free cloth. If skin irritation develops, discontinue use. If the problem persists, consult a physician. Driving Safely Check and obey the laws and regulations on the use of mobile devices like iPhone in the areas where you drive. Be careful and attentive while driving. If you decide to use iPhone while driving, keep in mind the following guidelines: Give full attention to driving and to the road. Using a mobile device while driving may be distracting. If you fi nd it disruptive or distracting while operating any type of vehicle, riding a bicycle, or performing any activity that r...