Оценок - 2, средний балл: 4.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Do not handle your device with wet hands. Water damage to your device can void your manufacturer’s warranty. • Avoid using your device’s light close to the eyes of children or animals. • Do not use the device during a thunderstorm. Thunderstorms can cause the device to malfunction and increase the risk of electric shock. Excessive exposure to loud sounds can cause hearing damage. Exposure to loud sounds while driving may distract your attention and cause an accident. Use only the minimum volume setting necessary to hear your conversation. English 3 Getting started Your headset overview Mounting clip Speaker Indicator light Volume button Talk button Charging socket Microphone Make sure you have the following items: headset, travel adapter and user manual. The supplied items may vary. EnglishButton functions Button Function Talk Press and hold to turn the headset on. • Press and hold for 3 seconds to turn the headset off. • With the headset turned off, press and hold for 3 seconds • to enter Pairing mode. Press to answer or end a call. • Press and hold to reject an incoming call. • Press and hold to place a call on hold. • Press and hold to switch between calls. • Volume Press to adjust the volume. • Press and hold to turn the microphone on or off during a • call. EnglishButton functions Button Function Talk Press and hold to turn the headset on. • Press and hold for 3 seconds to turn the headset off. • With the headset turned off, press and hold for 3 seconds • to enter Pairing mode. Press to answer or end a call. • Press and hold to reject an incoming call. • Press and hold to place a call on hold. • Press and hold to switch between calls. • Volume Press to adjust the volume. • Press and hold to turn the microphone on or off during a • call. 5 Charging the headset Charging the headset This headset has a rechargeable internal battery which is non-removable. Make sure the headset is fully charged before using it for the first time. Use only Samsung-approved chargers. Unauthorised or non-Samsung chargers could cause damage to the headset or in extreme circumstances an explosion, it could also invalidate any warranty on the product. 1 Connect the travel adapter to the charging socket on the headset. 2 Plug the travel adapter in to the wall outlet. During charging, the indicator light will turn red. If charging does not begin, unplug the travel adapter and plug it in again. 3 When the headset is fully charged, the red indicator light changes to blue. Unplug the travel adapter from the wall outlet and the headset. • Repeatedly charging and discharging of the headset, over time will cause the battery performance to diminish. This is normal for all rechargeable batteries. • Never make or receive calls while charging, always disconnect your headset from the charger and answer the call. • To save energy, unplug the travel adapter when not in use. The travel adapter does not have a power switch, so you must unplug it from the outlet when not in use to avoid wasting power. The travel adapter should remain close to the socket when in use. Checking the battery level To check the battery level, press and hold the Volume down button and the Talk button at the same time. Depending on the battery level, the indicator light flashes 5 times in one of the following colours: Battery level Indicator light colour Above 80% Blue 80 ~20% Violet Below 20% Red When the headset battery is low The headset indicator light flashes red and you can hear beeps. If the headset powers off during a call, the call will be automatically transferred to the phone. English 7 Wearing the headset Wearing the headset • Do not bend the mounting clip away from the body or apply too much pressure on it as this could cause permanent damage to the clip or headset. • If you have poor call quality issues, make sure that the earbud is properly placed over the ear hole or the microphone is not blocked. • The call quality may vary depending on how you grip your bluetooth headset. To minimize interference, we recommend you hold the middle bottom part of the headset while talking on the phone. Using your headset This section explains how to turn the headset on or off, pair and connect the headset to the phone, and use various functions. • Activated functions and features may differ depending on the phone type. • Some devices, especially those that are not tested or approved by the Bluetooth Special Interest Group (SIG), may be incompatible with your headset. To ensure you get the best performance from your headset • Keep the distance between your headset and device as small as possible and avoid placing your body or other objects in the signals path. • Covering your headset or device could effect its performance so keep contact to a minimum. English 9 Turning the headset on or off Turning the headset on or off To turn the headset on Press and hold the Talk button. The blue indicator light flashes 4 times. Turning the headset on for the first time, it will automati...