Оценок - 1, средний балл: 3 ( )

Производитель: JVC Размер: 535.83 kb Название файла: 65f0ac5d-75d0-4d76-8571-b5e853936af5.pdf Язык инструкции:

• Do not cut two cords at the same time since it may cause a shortcircuit. Calling through the unit Preparation: • Activate the Bluetooth communication function on your cellular phone. • Finish pairing between the unit and your cellular phone. 1 Turn on the unit. 2 Execute the Bluetooth connection on the cellular phone. • Refer also to the instruction manual supplied for the cellular phone. • If the connection is not completed within five minutes, the unit automatically turns off. In this case, turn the POWER switch to OFF and turn it back to ON, and then repeat the procedure from step 1. • When using a cellular phone supports both HFP and HSP Bluetooth Profile, use HFP for this unit. • When the connection is completed, the blue lamp flashes repeatedly. Basic controls available for the cellular phone connected with HFP: Status CALL button Press Press and hold Waiting Start voice dialing Redial Dialing by voice dialing Cancel voice dialing — Calling Cancel calling — Incoming Answer the call Reject the call Answering Finish the call Switch the device (between cellular phone and the unit) Basic controls available for the cellular phone connected with HSP: Status CALL button Press Press and hold Waiting — Redial Calling Cancel calling Cancel calling or switch to the unit Incoming Answer the call Reject the call Answering Finish the call Switch the device (between cellular phone and the unit) • These functions may not available for some cellular phones. • When answering a call on cellular phone, these functions may not work. To make a call while playing back music When connecting the cellular phone by using HFP or HSP Bluetooth Profile, you can make a call by using the cellular phone. To answer a call while playing back music When a call comes in, the playback sound turns to ring tone. Press the CALL button to answer the call. To finish the call Press the CALL button. The playback sound comes back. (The playback sound may not come back in some cellular phone.) You can register up to 8 Bluetooth devices to the unit. • The device that has the oldest connection date will be overwritten when you register a 9th Bluetooth device. Before pairing... • Make sure that the unit is turned off. • Turn on the target Bluetooth device and place it within 1 m from the unit. 1 Turn on the unit with pressing and holding the CALL button to make it in the pairing mode. The blue lamp and the red lamp will start flashing continuously as the unit finds the target Bluetooth device (pairing mode). Release the CALL button after the flashing starts. • Finish the steps below within about 3 minutes after the flashing starts (the pairing mode is automatically cancelled after the period). Turn off the unit and start from step 1 again when you cannot finish the operation. 2 Execute pairing operation on the target Bluetooth device to find the unit. The device shows the list of Bluetooth devices found. The unit is recognized as “JVC HA-W700BT”. Repeat from Step 1 again when “JVC HA-W700BT” is not found. • Refer also to the instruction manual supplied for the target device. Registering a Bluetooth device – Pairing 3 Select “JVC HA-W700BT” on the target Bluetooth device. 4 Enter “0000” when the Pass code* is requested on the target Bluetooth device. Pairing is finished when the red lamp goes out and the blue lamp flashes three times repeatedly. * also called as “pass key”, “PIN code”, “PIN number”, etc. 5 Execute Bluetooth connection to the unit on the target Bluetooth device. The unit saves the target as the last connected Bluetooth device. • Refer also to the instruction manual supplied for the target device. • Some Bluetooth device will automatically connect with the unit after pairing is finished. • When the connection is completed, the blue lam...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: