Оценок - 5, средний балл: 3.6
(
)
)
|
Фрагмент инструкции
Charge your headset. 2. Activate Bluetooth on your mobile phone (refer to the manual for your mobile phone). 3. Pair your headset to your mobile phone. The Jabra JX20 Pura is easy to operate The answer/end button on the headset performs different functions depending on how long you press it Jabra JX20 Pura 3 * Phone dependent Instruction Duration of press Tap Press briefly Press approx seconds Press and hold more than 3 seconds CharGe your headset make sure that your Jabra JX20 Pura headset is fully charged before you start using it use the aC adapter to charge from a power socket, or charge directly from your PC with the usb cable provided Please note: The lifetime of the battery will be significantly reduced if your device is left uncharged for a long period We therefore recommend that you recharge your device at least once a month 1. Charging from your deskstand: • Connect your usb cable/aC adapter to the deskstand Place your JX20 Pura headset in the deskstand as shown in fig 2 2. Battery status indicators: • When the headset is charging, it will indicate the amount of power in the battery Charging your headset from AC adapter or USB cable: What you see What this means led flashes once led flashes twice led flashes three times led flashes four times 0-25% charged 25-50% charged 50-75% charged 75%- 00% charged led soild white fully charged Jabra JX20 Pura 4 Charging your headset from your deskstand: What you see What this means led off no device in deskstand st led solid st led solid, 2nd led pulsing +2 led solid, 3rd led pulsing device in deskstand 0-25% charged 25-50% charged +2+3 led solid, 4th led pulsing 50-75% charged +2+3 +4 led solid, 5th led pulsing 75- 00% charged all led.s solid fully charged Check Battery status: • When you are not in a call, tap either volume button The led will flash in accordance with the aC adapter/usb charger sequence above turninG your headset on and off • Gently turn the earpiece 90° clockwise to turn on the headset (see fig ) • Gently turn the earpiece 90° anti-clockwise to turn off the headset (see fig ) PairinG it With your Phone The first time you turn on your Jabra JX20 Pura it will automatically enter pairing mode In this case skip directly to point 2 below When pairing with a second device, or if you need to pair manually, start with point below 1. Put the headset in pairing mode: • Turn the headset on • Press and hold the answer / end button until the led on the back shines continuously Jabra JX20 Pura 5 2. Set your Bluetooth phone to ‘discover’ the Jabra JX20 PURA: • follow your phone’s user manual This usually involves going to a “setup,”“Connect” or “bluetooth” menu on your phone and selecting the option to search or add a bluetooth device 3. Your phone will find the Jabra JX20 PURA: • your phone will find the headset under the name “JX20 Pura” your phone then asks if you want to pair with the headset accept by pressing ‘yes’ or ‘ok’ on the phone and confirm with the passkey or PIn = 0000 (4 zeros) your phone will confirm when pairing is complete JX20 PURA JX20 PURA JX20 PURA In case of unsuccessful pairing, put the Jabra JX20 Pura into pairing mode manually (see pairing section) WearinG style The Jabra JX20 Pura is ready to wear without an earhook – simply insert it in your right or left ear If you prefer to use the earhook, attach the earhook to the earhook connection (see fig ) for optimal performance, wear the Jabra JX20 Pura and your mobile phone on the same side of your body or within line of sight In general, you will get better performance when there are no obstructions between your headset and your mobile phone hoW to Answer a call • Tap the answer/end button on your headset to answer a call End a call • Tap the answer/end button to end an active call Jabra JX20 Pura 6 Reject a call * • Press the answer/end button when the phone rings to reject an incoming call depending on your phone settings, the person who called you will either be forwarded to your voice mail or hear a busy signal Make a call • When you make a call from your mobile phone, the call will (subject to phone settings) automatically transfer to your headset If your phone does not allow this feature, tap on the Jabra JX20’s Pura answer/end button to transfer the call to the headset Activate voice dialing* • Tap the answer/end button for best results, record the voice- dialling tag through your headset Please consult your phone’s user manual for more information about using this feature Redial last number * • double tap the answer/end button when the headset is on and not in use Adjust sound and volume * • Press the volume buttons (up or down) to adjust the volume (see fig ) Call waiting and placing a call on hold* This lets you put a call on hold during a conversation and answer a waiting call: • Press the answer/end button once to put the active call on hold and answer the waiting call • Press the answer/end button to switch between the two calls • Tap the answer/end button to reject a...