Оценок - 5, средний балл: 3.4
(
)
)
|
Фрагмент инструкции
ENGLAND Plantronics 2 year Warranty and Repair Service • Products under warranty are replaced free of charge. • All units serviced to full production standards using original factory parts. 0800 410014 Plantronics Ltd Wootton Bassett, UK Tel: 0800 410014 + 44 1793 842200 Plantronics B.V. Hoofddorp, The Netherlands Tel: (0)0800 PLANTRONICS 0800 7526876 (NL) 00800 75268766 (BE/LUX) Plantronics Sarl Noisy-le Grand, France No Indigo: 0825 0825 99 +33 1 41 67 4141 Plantronics GmbH Hurth, Germany Tel: 0800 9323400 + 49 22 33 3990 Osterreich: 0800 242500 Schweiz: 0800 932 340 Plantronics Acoustics Italia Srl Milan, Italy Numero Verde: 800 950934 + 39 02951 1900 Plantronics Iberia, S.L. Madrid, Spain Tel: 902 41 51 91 + 34 91 640 47 44 Plantronics MEEA Sales Region London, UK Tel: +44 208 349 3579 Nordic Region Finland 0201 550 550 Sverige 031 28 95 00 Danmark 44 35 05 35 Norge 23 17 3770 37245-01 Rev B. © 2002 Plantronics Inc. All rights reserved. Plantronics, the logo design, Plantronics and the logo design combined are registered trademarks and Headset Switcher is a trademark of Plantronics Inc. in the United States and various other countries. 1 6 5 4 3 2 – + 4 3 5 6 3 WARRANTY AND SERVICE 2 4 1 6 5 4 3 2 – + 6 5 4 3 Fig. A 4 3 2 5 6 1 6 5 4 3 2 – + 4 3 5 6 Fig. D Fig. E 1 2 4 3 2 5 6 Fig. F 1 6 5 4 3 2 – + 4 3 5 6 Fig. G Fig. C 4 3 2 5 6 Fig. H 4 3 2 5 6 Fig. I 4 3 2 5 6 Fig. J DIAGRAMS DIAGRAMS •Plantronics guarantees the satisfactory condition of the equipment with regard to manufacturing and material defects for 2 years from the date of purchase. (Please retain the original receipt). •This product should be installed and used in accordance with the instructions detailed in this user guide, and serviced at an approved Plantronics Service Centre. Failure to comply with these conditions may render the warranty void. •This does not affect your statutory rights. Fig. B WELCOME Headset Switcher™ MX10 Multimedia Adapter Thank you for selecting the Headset Switcher MX10 Multimedia Adapter from Plantronics. The Headset Switcher MX10 Multimedia Adapter connects your telephone and computer or external audio device to a Plantronics headset and provides control of the sound through your headset. This user guide provides instructions on the installation and usage of your MX10 Multimedia Adapter. DIAGRAM KEY 1 Battery Access Door 7 Telephone/Computer Audio Switch (controls direction of 2 Compatibility Slide Switch incoming sound) 3 Compatibility Slide 8 Microphone Selection Switch Cover Switch (controls direction 4 Speak Volume Control of microphone) 5 Listen Volume Thumbwheel 9 Headset Jack Control 10 External Audio Listen 6 Headset/Handset Selector Volume Control IMPORTANT SAFETY INFORMATION Please read the following instructions before use: •This product is suitable for indoor use only •Use only the AC Adapter specified, with a power supply of the correct voltage •Use of battery types other than two alkaline AA or equivalent may cause the unit to malfunction and could be hazardous •Remove the batteries when using the AC Adapter or when the MX10 Multimedia Adapter will not be used for more than one week •Dispose of the batteries in accordance with local law •Do not exceed a comfortable listening level. Do not listen to loud material for long periods •Do not use the MX10 with one piece telephones (i.e. telephones in which the dial keypad is part of the handset). INSTALLATION Identify the components as shown in Fig (A). Install the MX10 Multimedia Adapter as shown in Fig (B). We recommend the use of the AC power supply (included). Alternatively two AA alkaline batteries (not included) may be used but will need to be replaced frequently. To install batteries refer to Fig (C) and follow these instructions: 1. Remove the Battery Access Door (1) located on the side of the adapter by placing your thumb on the door and pushing down. 2. Install two AA alkaline batteries and replace the door. 3. You will hear three "beeps" through the headset when the batteries are low. DEFAULT SETTINGS Refer to Fig (D). These are the default switch settings for headset use: 1. Headset/Handset Selector (6) is switched to Headset. 2. Telephone/Computer Audio Switch (7) is released (no coloured indicator showing). 3. Microphone Selection Switch (8) is released (no coloured indicator showing). 4. Listen Volume Thumbwheel (5) is set to number 4. 5. Speak Volume Control (4) has been preset. You can adjust it when you place your test call. TELEPHONE/ADAPTER COMPATIBILITY The Compatibility Slide Switch (2) has been preset to position 5, which will work with most telephones. If adjustment is required refer to Fig (E) and follow these instructions: 1. Remove the Compatibility Slide Switch Cover (3) by placing two fingers or thumbs on the raised bumps and pushing down. 2. Using the flat screwdriver provided on the base of the adapter, move the Compatibility Slide Switch (2) until you hear a clear dial tone. Experim...