Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
FIG.3.2 2 DIAGRAMS DIAGRAMS NECKBAND Available only as an accessory. FIG.3.3 3 DIAGRAMS DIAGRAMS LISTEN VOLUME ADJUST MUTE FEATURE FIG.4.1 FIG.4.2 INSTALLING A REPLACEMENT BATTERY FIG.5 4 WELCOME CS50-USB/CS60-USB Wireless Headset System User Guide. Thank you for selecting the CS50USB/ CS60-USB Wireless Headset System from Plantronics. The CS50-USB/CS60-USB oers wireless, hands-free headset convenience and long range workspace mobility. This user guide provides instructions on the installation and usage of your system. For safety and regulatory informa tion, please refer to the separate Important Safety Information booklet. Detailed technical infor mation and a copy of the Declaration of Conformity can be found at documentation 5 USAGE INSTRUCTIONS USAGE INSTRUCTIONS DIAGRAM KEY HEADSET 1 Microphone 2 Speaker 3 Talk Button 4 Volume/Mute Control 5 On-line Indicator 6 Charge Contacts 7 Battery Door 1. GETTING STARTED DESK CHARGER 8 AC Power Adapter 9 AC Power Adapter Port 10 Headset Docking Cradle 11 Charge Contacts 12 Status Indicator 13 Charge Indicator 14 Stand 15 Stand Pegs 16 Ringer Switch On/Off 17 USB Connector 18 Subscription button access hole (paperclip required) To use your Plantronics CS50-USB/CS60-USB Headset System, please follow these simple steps: 1. Install the hardware. 2. Install the software. 3. Charge your headset battery. 4. Choose your headset wearing style. 5. Carry out the initial set-up INSTALLING THE CS50-USB/CS60-USB BASE UNIT To install the base-unit, attach the stand by inserting the Stand Pegs into the locating holes on the underside of the base unit. Connect to the USB connector shown in Fig. 2 on page 1 to a free USB port on your computer. A USB hub can be used but you should ensure it can supply sufficient power (250mA) to charge the headset. This will create the finished assembly (refer to Fig.3, page 1). Alternatively, the Velcro strips included can be used to attach the base unit to a PC monitor. The optional AC Power Adapter can be installed as shown in Fig. 2.1 6 INSTALLING THE PerSonoCall SOFTWARE To install the software, insert the CD supplied with CS50-USB/CS60-USB. If the CD does not autoplay, then use Windows Explorer to find the file called install.bat, double- click on it and then follow the instructions on-screen. CHARGE YOUR HEADSET BATTERY To charge the headset battery, place the headset into the DOCKING CRADLE. During To charge the headset battery, place the headset into the DOCKING CRADLE. During charging the CHARGE indicator (13) will be illuminated. When the headset is fully charged, the CHARGE indicator (13) will extinguish. The headset must be charged for a minimum of 1 hour prior to use – 3 hours to fully charge. CHOOSE YOUR HEADSET WEARING STYLE The CS50-USB/CS60-USB is provided with a choice of wearing styles. A neckband is also available as an accessory. Refer to Fig. 3 on pages 2 and 3 for instructions on how to connect and adjust your choice of wearing style. INITIAL SET-UP RINGER The CS50-USB/CS60-USB includes a ringer in the base to ensure that if you are not wearing the headset then you can still receive notification of an incoming call. The feature is disabled when the Ringer switch (16) is in the up position (as shown) or enabled when the switch is in the down position. COMPUTER AUDIO & VOICE DEVICES When the CS50-USB/CS60-USB is installed, it will set itself as the default voice device in your computer. You can set your preferences manually in Windows ™ through the Sounds and Audio Devices option in Control Panel. SOFTPHONE In addition to setting up the CS50-USB/CS60-USB through your computer operating system, your softphone may require you to choose which audio device you wish to use and carry out a short test to match this device to the softphone. It may also enable you to choose which device indicates an incoming call. Please refer to your softphone documentation to determine how to do this. 7 2. USING YOUR HEADSET PERSONOCALL SOFTWARE BASIC OPTIONS TAB SELECT SOFTPHONES Check the box or boxes of the softphones (installed during setup) you want the headset to work with. If you change the softphone you use, or add an additional one, then you can change the softphones selectable by running “Install” again from the PerSonoCall software CD. LAUNCH PERSONOCALL WHENEVER WINDOWS™ STARTS Check this box to automatically launch the PerSonoCall application whenever you start your computer. PerSonoCall software must be activated to enable the remote ring detection and answer/end capabilities with supported softphones. ENABLE HEADSET ONLY FOR PHONE CALLS Check this box to conserve headset battery power by turning off the headset radio when no softphone call is active. The radio link is automatically re-activated when a softphone call is activated. When this box is checked, your headset only functions for phone calls. If you still want to use the headset to listen to audio files such as mp3, you should not check this...