Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna; • Increase the separation between the equipment and receiver; • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; • Consult the dealer or an experienced radio/TV technician for help. Modifications The FCC requires the users to be notified that any changes or modifications made to this device that are not expressly approved by the party responsible for compliance may void the user’s authority to operate this device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; (2) This device must accept any interference received, including interference that may cause undesired operation. 02 Trademarks © 2006 Auvi Electronics N.A., LLC. All rights reserved. Auvi Electronics N.A. “Auvi” shall not be liable for any errors contained herein or for any damages arising out of or related to this document or the information contained herein, even if Auvi has been advised of the possibility of such damages. This document is intended for informational and instructional purposes only. Auvi reserves the right to make changes in the specifications and other information contained in this document without prior notification. Auvi disclaims any obligation to update the information contained herein. Auvi Technologies, Auvi Electronics N.A., Auvi logo and Vision Beyond Sound are trademarks or registered trademarks of Auvi Technologies, LLC in the United States and/or other countries. Windows is a trademark or registered trademark of Microsoft Corporation in the United States and/or other countries. Skype and the Skype logo are trademarks or registered trademarks of Skype Technologies, S.A. in the United States and/or other countries. All other product names may be trademarks of the companies with which they are associated. Warning: To reduce risk of electric shock, do not directly or indirectly (through a phone) connect the device to a PSTN wall outlet. Technical Support For more information regarding the WIP20, please visit our online technical support site at or contact us directly at: Auvi Electronics N.A. 5988 Mid Rivers Mall Drive Saint Charles, MO 63304 Telephone: 636-447-4005 Section 1 Introduction Section 2 03 Diagram Package Contents The contents are specifically designed to be used only with the WIP20. System Requirements: • IBM PC compatible with minimum 400MHz processor • 128MB RAM • 5MB available hard disk space • Available microphone and audio out jack • CD-ROM drive • Windows® XP only • Analog traditional or cordless telephone • Broadband or dial-up Internet connection Power in Audio in Mic in Connect telephone cord Audio out Software Installation CD 3.5mm-to-3.5mm line-in cords (2) Quick start guide WIP20 AC adapter Skype™ Software Section 3 04 The first step to using the WIP20 is to install Skype™ on the computer. This section describes how to download and install Skype™, create a Skype™ account and add contacts. Installing Skype™ Software If you already have the latest version of Skype™ on your computer, go to the next section. If you don’t have the latest version, please follow the steps below. 1. Access the web and go to: 2. Double-click the download button for Windows®. 3. Once downloaded, double-click the setup icon to start the installation. 4. Choose a language. SkypeSetup 5. If you agree to the License Agreement, click in the circle next to “I accept the agreement”, then click NEXT. 6. Save Skype™ on your hard drive. Creating a Skype™ Account 05 7. In the next window, set up additional tasks, if needed, then click NEXT. 8. Click FINISH in the last window to complete the installation. 1. In the “New Users Create a Skype Account” tab, enter the required information. Click NEXT. 2. “Your Skype Personal Profile” Enter the information in the approiate text boxes. Click UPDATE. Section 3 06 Adding a Skype™ contact 1. Once logged-in to your account, go to the main Skype™ account window. 2. From the menu at the top of the window, select Tools, and then Add a Contact. 3. Enter the name of another Skype™ user in the appropriate text box, then click NEXT. 4. Make the appropriate selections, then click OK. Section 3 07 5. The contact...