Оценок - 4, средний балл: 3.5
(
)
)
|
Фото и характеристики Motorola H790 |
Фрагмент инструкции
The indicator light is red or yellow while the battery is charging. When the battery is fully charged, the indicator light turns green. Note: Headset is not functional while charging. Note: Your battery is designed to last the life of your product. It should only be removed by a recycling facility. Any attempt to remove or replace your battery will damage your headset. 2 pair & connect pair & connect Once charged, let’s get your headset paired and connected to your Bluetooth phone(s). pair & connect first phone 1 Turn off any Bluetooth devices previously paired with your headset. 2 Turn on the Bluetooth feature on your phone. 3 Put headset on your ear (see “wear it” on page 7 for help). 4 Turn on your headset (see “turn on” on page 8 for help). The indicator light becomes steadily lit in blue and you hear “ready to pair”. 5 Follow voice prompts to connect your phone to your headset. Note: When prompted for the passkey, enter 0000. When your headset successfully pairs with your phone, you hear “pairing complete”. When connected, you hear “phone 1 connected” and see the indicator light rapidly flash in blue and purple. 3 pair & connect pair & connect pair & connect second phone (optional) 1 Turn off first phone and any other Bluetooth devices previously paired with your headset. 2 Turn your headset off (see “turn off” on page 8 for help). 3 Turn on the Bluetooth feature on your phone. 4 Put headset on your ear. 5 Turn on your headset. The indicator light becomes steadily lit in blue and you hear “ready to pair”. 6 Follow voice prompts to connect your phone to your headset. When your headset successfully pairs with your phone, you hear “pairing complete”. When connected, you hear “phone 1 connected” and see the indicator light rapidly flash in blue and purple. To connect to both phones, simply turn on the first phone while the second phone is connected. When you hear “phone 2 connected”, your headset is connected to 4 pair & connect pair & connect both phones. The last paired phone (your second phone) is now your primary phone (or “phone 1”) for voice dial functionality. test your connection 1 Place the headset on your ear. 2 On one phone, dial the number you want to call and press Call/Send key. Repeat for the second phone. If your phones and headset are successfully connected, you hear ringing on the headset. For daily use, make sure your headset is turned on, and your phone’s Bluetooth feature is on. Your headset and phone will connect automatically. 5 put it on put it on choose an earbud To get the best headset performance, try out all the supplied ear cushions to get a good fit. choose an ear Your headset comes ready for the right ear. To change for the left ear: 6 put it on put it on wear it Flex the ear hook and loop it over your ear. Tip: For optimal audio performance and comfort, be sure to position the ear cushion into your ear canal and point the headset microphone towards your mouth. 7 turn on & off turn on & off turn on Slide the Power switch to the on position (no red is shown under the switch).The indicator light flashes blue three times, then flashes in blue and purple (if connected with a device) or is steadily blue (if ready to be paired). Power Switch Indicator Light turn off Slide the Power switch to the off position (red is shown under switch). The indicator light flashes three times then turns off. 8 battery check battery check Press and hold both Volume buttons while not on a call. indicator light voice prompt talk time red “battery level is low” less than 1.5 hours yellow “battery level is medium” between 1.5 to 3.5 hours green “battery level is high” more than 3.5 hours To save battery power, turn off the headset when you don't use it for an extended time. 9 calls calls To... answer call Press the Call button. reject call Press and hold a Volume button until you hear an audio tone make a voice dial call Press the Call button and you hear an audio tone. redial last call Press and hold the Call button until you hear an audio tone. mute or unmute a call Press and hold both Volume buttons until you hear “mute on” or “mute off”. end a call Press the Call button. answer second incoming call Press the Call button. reject second incoming call Press and hold a Volume button until you hear a tone. Tip: When connected to two phones, voice prompts help manage call functions such as voice dial, redial, and end call. Follow the voice prompts to execute a function on the desired phone. 10 calls calls Note: Your headset supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See the instructions that came with your phone. Note: Some call features are phone/network dependent. 11 status indicators status indicators indicator light (with charger plugged in) headset indicator headset status red charging (battery level less than 50% charge) yellow charging (battery level more than 50% charge) green charging complete indicator light (with charge...