Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
There are two ways to search for a new radio station on your G4: Seek and save: 1. While the Radio is on, select the station number from one to six that you wish to set by tapping the CHANNEL “B” button until the desired station is found. 2. Press and hold the Volume Up or Volume Down Button for three seconds. • Pressing Volume Up will search upwards (higher frequency). • Pressing Volume Down will search downwards (lower frequency). 3. Once a station is found, searching stops and you can hear the station. 4. To continue searching, press the Volume Up or Volume Down Button again for three seconds. 5. Tap the CHANNEL “B” button within 20 seconds of finding the station to save the current station. 6. If you don’t save the station, the Radio will exit search mode without saving the current station. You can still continue to listen to the current unsaved station. Tapping the CHANNEL “B” Button in this case will move to the next saved station. Scan and save: 1. While the Radio is on, select the station number from one to six that you wish to set by tapping the CHANNEL “B” button until the desired station is found. 2. Press and hold the Volume Up button for 6 seconds. 3. The device will begin to Scan by searching upwards for the next station. Once a station is found, searching pauses for a few seconds while you hear the current station and then the G4 will automatically continue to the next station. 4. To stop Scanning and stay on the current station, tap the Volume Up Button again. 5. Tap the CHANNEL “B” button within 20 seconds of finding the station to save the current station. 6. If you don’t save the station, the Radio will exit search mode without saving the current station. You can still continue to listen to the current unsaved station. Tapping the CHANNEL “B” Button in this case will move to the next saved station. NOTE: Press CHANNEL “B” button during radio Scan to Fast Save the current station directly into the Preset Channel number you were last listening to. Automatic Radio Tuning: Automatically search for and find 6 new “on the go” radio stations with one button press. This feature makes finding new stations fast and easy by creating a temporary list of “on the go” radio stations. While the radio is on, press and hold the Volume Down Button for 6 seconds, and the G4 will search upwards from the current frequency and store the next 6 FM stations it discovers as “on the go” stations. You can repeat this process as many times as you wish, searching for the next 6 FM stations each time. Now you can cycle through these stations by tapping the CHANNEL “B” button. NOTE: These 6 temporary “on the go” stations cannot be saved and do not replace the permanent Saved Radio Stations you may have set using the 7.2 CABLE CONNECTING YOUR MP3 PLAYER OR OTHER EXTERNAL AUDIO SOURCES Using the auxiliary line-in port for cable connectivity The G4 has an auxiliary jack which allows you to connect non- Bluetooth audio sources, such as MP3 players (with 3.5 mm - 1/8” stereo jacks) to the G4 by using the enclosed cable. 1. Make sure the G4 is on Standby mode, flashing slowly in Blue. MP3 /Aux Jack 2. Connect the MP3 cable to your MP3 player/audio source’s Jack and insert the other end of the cable into the Auxiliary Jack. 3. Operate the MP3 Player device by using its own buttons as usual (FF/REW/ PLAY/PAUSE). Volume can be adjusted through the MP3 Player or the Volume Buttons of the G4. Any other audio connection will automatically mute the MP3 Player. The audio signal will return only when the G4 is once again in Standby mode. NOTE: While listening to your MP3 player, the VOX feature is disabled. 8. USING THE MOBILE PHONE INITIATING AND RECEIVING MOBILE PHONE CALLS BASIC FUNCTIONS Answer a call Tap the Mobile Button or speak loudly any word of your choice during an incoming call Reject a call Remain silent for 15 seconds, or press and hold the Mobile Button for 3 seconds during an incoming call Terminate a call Tap the Mobile Button during a call, or let the other party terminate the call Voice Dial During Standby, tap the Mobile Button and pronounce loudly the name of the person you wish to call. This feature is supported only by mobile phones that include the Voice Dial feature Redial During Standby, tap the Mobile Button twice ADVANCED FUNCTIONS FOR 3-WAY COMMUNICATION: Add/Remove CHANNEL “A” to/from phone call Tap the CHANNEL “A” button while on a phone call Add/Remove CHANNEL “B” to/from phone call Tap the CHANNEL “B” button while on a phone call When the G4 is on an active phone call, any Intercom call request will be automatically rejected. Once the phone call is terminated, you can initiate and accept Intercom calls. STATUS LIGHTS LED Indication Status None G4 is off 1 blue flash every 3 seconds Standby – No call is in progress 2 blue flashes every 3 seconds Call is in progress / FM Radio or Music is ON 1 red flash every 3 seconds Standby - Battery is low 9. USING THE INTERCOM Flip-up Antenna for extended range 9.1 ...