Войти:
Оценок - 3, средний балл: 4.3 ( )

Инструкция по эксплуатации Homelite, модель UT10560

Производитель: Homelite
Размер: 24.36 mb
Название файла:
Язык инструкции:enesfr
Перейти к скачиванию



Фрагмент инструкции


1b KNOW YOUR CHAIN SAW See Figures 1a - 1b. The safe use of this product requires an understanding of the information on the product and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. CHOKE LEVER The choke lever opens and closes the choke valve in the carburetor. Positions available include FULL CHOKE and RUN. front hand guard./ CHAIN BRAKE The chain brake is designed to quickly stop the chain from rotating. When the front hand guard/ chain brake is pushed toward the bar, the chain should stop immediately. The chain brake does not prevent kickback. GUIDE BAR The factory-equipped guide bar has a small radius tip that offers a somewhat lower kickback potential. LOW KICKBACK SAW CHAIN The low kickback saw chain helps minimize the force of a kickback reaction by preventing the cutters from digging in too deeply at the kickback zone. primER bulb The primer bulb pumps fuel from the fuel tank to the carburetor. SAFE-T-TIP® ANTI-KICKBACK NOSE GUARD The Safe-T-Tip® Anti-Kickback Nose Guard is an attachment provided on the end of the guide bar to prevent the chain on the end of the guide bar from contacting the wood. THROTTLE TRIGGER The throttle trigger is used for controlling chain rotation. ASSEMBLy ASSEMBLy UNPACKING This product has been shipped completely assembled. • Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. • Inspect the product carefully to make sure no WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced. Failure to heed this warning could result in serious personal injury. WARNING: Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Always wear safety goggles or safety glasses with side shields when operating power tools. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury. WARNING: Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. NOTE: Thechainsawhasbeenfullyfactorytested. It is normal to find some slight lubricant residue on the saw. Read and remove all hang tags and store with the Operator’s Manual. breakage or damage occurred during shipping. .Do not discard the packing material until you have carefully inspected and satisfactorily operated the product. .If any parts are damaged or missing, please call 1-800-242-4672 for assistance. PACKING LIST Chain Saw Scabbard Combination Wrench (UT10542, UT10562 & UT10582 only) 2-Cycle Engine Lubricant Bar and Chain Lubricant (UT10580, UT10582, UT10585, and UT10918 only) 18 in. Replacement Chain (UT10580, UT10582, UT10585, and UT10918 only) Case (UT10560, UT10562, UT10580, UT10582, UT10585, and UT10918 only) Operator’s Manual OPERATION WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury. . WARNING: Wear eye protection which is marked to comply with ANSI Z87.1, as well as hearing and head protection, when operating this equipment. Failure to heed this warning could result in serious personal injury. Page 11 — English OPERATION OPERATION APPLICATIONS You may use this product for the purposes listed below: . Basic limbing, felling, and bucking . Removing buttress roots WARNING: Always shut off engine before fueling. Never add fuel to a machine with a running or hot engine. Move at least 30 ft. from refueling site before startingtheengine.DONOTSMOKE!Stayawayfrom open flames or sparks. Failure to heed this warning could result in serious personal injury. FUEL AND REFUELING HANDLING THE FUEL SAFELy WARNING: Check for fuel leaks. If any are found, correct them before using the saw to prevent fire or burn injury. . Always handle fuel with care; it is highly flammable. . Always refuel outdoors and do not inhale fuel vapors. . Do not let gasoline or lubricant come in contact with skin. . Keep gasoline and lubricant away from the eyes. If gasoline or lubricant comes in contact with the eyes, wash them immediately with clean water. If irritation is still present, see a doctor immediately. . Clean up spilled fuel immediately. Refer to Refueling in the Specific Safety Rules section of this manual for additional safety infor mation. MIXING THE FUEL . This product is powered by a 2-cycle engine and requires pre-mixing gasoline and 2-cycle lubricant. Pre-mix unleaded gasoline and 2-cycle engine lubricant in a clean container approved for gasoline. . This engine is certified to operate on unleaded gasoline intended for automotive use ...

Эта инструкция также подходит к моделям:
Бензо и электропилы - UT10542 (24.36 mb)
Бензо и электропилы - UT10562 (24.36 mb)
Бензо и электропилы - UT10582 (24.36 mb)
Бензо и электропилы - UT10585 (24.36 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории