Оценок - 3, средний балл: 4.7 ( )

Производитель: RedMax Размер: 1.33 mb Название файла: Язык инструкции:

21. This chain saw is equipped with a spark arrester built-in muffler. Periodically check the arrester to keep it in good order. KICKBACK SAFETY PRECAUTIONS FOR CHAIN SAW USERS . Kickback may occur when the nose or tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut. Tip contact in some cases may cause a lightning fast reverse reaction, kicking the guide bar up and back towards the operator. Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back towards the operator. Either of these reactions may cause you to lose control of the saw which could result in serious personal injury. . Do not rely exclusively on the safety devices built into your saw. As a chain saw user you should take several steps to keep cutting jobs free from accident or injury. (1) With a basic understanding of kickback you can reduce or eliminate the element of surprise. Sudden surprise contributes to accidents. (2) Keep a good grip on the saw with both hands, the right hand on the rear handle, and the left hand on the front handle, when the engine is running. Use a firm grip with thumbs and fingers encircling the chain saw handles. A firm grip will help you reduce kickback and maintain control of the saw. Don’t let go. (3) Make certain that the area in which you’re cutting is free from obstructions. Do not let the nose of the guide bar contact a log, branch, or any other obstruction which could be hit while you are operating the saw. (4) Cut at high engine speeds. (5) Do not overreach or cut above shoulder height. (6) Follow manufacturers sharpening and maintenance instructions for saw chain. (7) Only use replacement bars and chains specified by the manufacturer or the equivalent. WARNING .7 . F5-1 F5-2 F5-3 5. Installing guide bar and saw chain .9 . A new chain will expand its length in the beginning of use. Check and readjust the tension frequently as a loose chain can easily derail or cause rapid wear of itseif and the guide bar. [G3200EZ] 1. Pull the guard towards the front handle to check that the chain brake is not engageg. 2. Loosen the nut assembly and dismount the chain cover. (1) Nut assembly (2) Chain cover (3) Loosen 3. Set the guide bar to the power unit, gear the chain to the sprocket of clutch drum and fit it into the groove of the bar and the sprocket at the tip of the bar. (1) Moving direction (2) Sprocket of the clutch drum (3) Guide bar (4) Sprocket of the bar • Pay attention to the correct direction of the saw chain. • Make sure to fit the chain into the groove of the bar and the sprocket. If not, you may fail to tighten the chain. 4. Move the guide bar back and forth to adjust the position of projection A, B and C to fit in each hole. By inserting the projections into the bottom of holes, attach the chain cover securely. (1) Projection A (2) Projection B (3) Projection C WARNING NOTE (2) (1) (3) (4) (1) (2) (3) F5-5 F5-6 (1) (2) (3) F5-4 5. Installing guide bar and saw chain .10 . While temporary tightening, you may hear the “click” sound. But do not stop tightening at that time. This sound does not mean that the saw chain and guide bar were assembled. 5. While holding the chain cover, temporary tighten the nut assembly and fix the bar and chain cover. (You can fix them even by tightening the lever.) Check if the saw chain fits on the bar rail. If not, readjust by loosen the nut assembly. (1) Nut assembly (2) Chain cover (3) Lever (4) Proper tension, No gap 6. After fixing them, attach the bar protector for your safety. Pull the lever up and tighten it securely. Tightening torque: 7.9 ~ 12.8 N·m {80~130kgf-cm} (1) Lever (2) Bar protector (3) Fully tighten 7. If the chain becomes loose while using the unit, attach the bar protector and loosen the nut assembly around 4 turns. Dismount the protector and check if the chain fits on the bar rail. If not, readjust by loosen the nut assembly. Temporary tighten the nut assembly. The chain is to be tensioned automatically. After fixing the guide bar, mount the protector and tighten the lever securely for fully tightening. (1) Loosen (2) Bar protector A new chain will expand its length in the beginning of use. Check and readjust the tension frequently as a loose chain can easily derail or cause rapid wear of itself and the guide bar. NOTE IMPORTANT (1) (2) F5-9 (2) (1) (3) (4) (4) (1) (2) (3) F5-7 F5-8 50:1 MIXING CHART GASOLINE gal. 1 2 3 4 2-CYCLE OIL fl.oz 2.6 5.2 7.8 10.4 13 GASOLINE liter 1 2 3 4 2-CYCLE OIL ml 20 40 60 80 100 again for at least one minute. As some oils may be difficult to agitate depending on oil ingredients, sufficient agitation is necessary for the engine to last long. Be careful that, if the agitation is insufficient, there is an increased danger of early piston seizing due to abnormally lean mixture. 5. Put a clear indication on the outside of the container to avoid mixing up with gasoline or other containers. 6. Indicate the contents on outside of container for eas...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: