Войти:
Оценок - 3, средний балл: 3.7 ( )

Инструкция по эксплуатации MK Diamond Products, модель MK CX-3

Производитель: MK Diamond Products
Размер: 6.11 mb
Название файла: 6c5f1a0b-aa3b-1124-e5a2-3361c5f3f1e8.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


The Serial Number is located on the Rear Crossbar SERIAL NUMBER: NOTE: For your (1) one year warranty to be effective complete the warranty card (including the Serial Number) and mail it in as soon as possible. INTRODUCTION and TABLE OF CONTENTS INTRODUCTION: We at MK Diamond want to congratulate you on selecting the MK CX-3 Concrete Saw. We are certain that you will be pleased with your purchase. MK Diamond takes pride in producing the finest products in the industry. Operated correctly, your MK CX-3 should provide you with years of quality service. In order to help you, we have included this manual. This owner’s manual contains information necessary to operate and maintain your MK CX-3 safely and correctly. Please take a few minutes to familiarize yourself with the MK CX-3 by reading and reviewing this manual. If you should have questions concerning your MK CX-3, please feel free to call our friendly customer service department at: 800 421-5830 TABLE OF CONTENTS Page SAFETY: Safety Messages 3 Damage Prevention Message 3 General Safety Precautions and Hazard Symbols 3 California Proposition 65 Message 5 Safety Label Locations 6 Brick Saw Specific Warnings 7 Product Specifications 7 UNPACKING AND ASSEMBLY Unpacking 8 Contents 8 Transport 9 Assembly 10 SETUP, STARTUP, ADJUSTMENT AND OPERATION Setup 15 Start Up 16 Adjustment and Operation 17 Cleanup 20 MAINTENANCE AND TROUBLESHOOTING Maintenance 21 EXPLODED VIEW AND PARTS LIST Exploded View 37 Parts List 38 THEORY Theory of Diamond Blades 42 ACCESSORIES, ORDERING and RETURN INSTRUCTIONS Accessories 43 Ordering Information 44 Return Material Policy 44 Packaging Instructions 44 Authorized Service Centers 44 Manual Part No. 159348 Revision 07/15 MK CX-3 Revision 09/04, Effective Date September 17, 2004 Page 2 SAFETY Read and follow all safety, operating and maintenance instructions. Failure to read and follow these instructions could result in injury or death to you or others. Failure to read and follow these instructions could also result in damage and/or reduced equipment life. SAFETY MESSAGES: Safety messages inform the user about potential hazards that could lead to injury, death and/or equipment damage. Each safety message will be preceded by one of the following (3) three words that identify the severity of the message. Not following instructions WILL lead to DEATH or SERIOUS INJURY Not following instructions COULD lead to DEATH or SERIOUS INJURY Not following instructions CAN lead to injury DAMAGE PREVENTION AND INFORMATION MESSAGES: A Damage Prevention Message is to inform the user of important information and/or instructions that could lead to equipment or other property damage if not followed. Information messages convey information that pertains to the equipment being used. The word note, as in the example below will precede each message. NOTE: Equipment and/or property damage may result if these instructions are not followed. GENERAL SAFETY PRECAUTIONS AND HAZARD SYMBOLS: In order to prevent injury, the following safety precautions and symbols should be followed at all times! Safety Precautions: KEEP GUARDS IN PLACE. In order to prevent injury, keep guards in place and in working order at all times. EXPLOSIVE FUEL! Gasoline is extremely flammable, its vapors can explode if ignited; store only in approved containers, in well-ventilated, unoccupied buildings and away from sparks or flames. Do not fill the fuel tank while the engine is running or hot. Spilled fuel could ignite if it contacts hot parts or sparks from ignition. Do not start the engine near spilled fuel. Never use gasoline as a cleaning agent. LETHAL EXHAUST GASES! Engine exhaust gasses contain poisonous carbon monoxide, an odorless colorless gas that can cause death if inhaled. Avoid inhaling exhaust fumes, and never run the engine in a closed building or confined area. ELECTRICAL SHOCK! Never touch electrical wires or components while the motor is running. Exposed, frayed or worn electrical motor wiring can be sources of electrical shock that could cause severe injury or burns. ENGINE OVER-SPEED. ) ) Never tamper with the governor components or settings to increase the maximum speed of the ( machine. Severe personal injury and/or equipment damage could result if the equipment is operated ( speeds above design maximum. MK CX-3 Revision 09/04, Effective Date September 17, 2004 Page 3 SAFETY ACCIDENTAL STARTS! on Before starting the engine, be sure the ON/OFF switch is in the "OFF" position to prevent accidental starting. Place the ON/OFF switch in the OFF position before performing any service operation. ROTATING OR MOVING PARTS! Keep hands, feet, hair, and clothing away from all moving parts to prevent injury. Never operate a power tool with shrouds or guards removed. HOT PARTS! Engine components can become extremely hot from operation. To prevent severe burns, do not touch these areas while the engine is running, or immediately after it is turned off. Never operate the engine with heat s...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории