Войти:
Оценок - , средний балл: ( )

Инструкция по эксплуатации Harbor Freight Tools, модель 44493

Производитель: Harbor Freight Tools
Размер: 98.86 kb
Название файла: 44493.pdf

Язык инструкции:en

Документ загружается, подождите пожалуйста
Документ загружается, подождите пожалуйста

Фрагмент инструкции


Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician. Do not use the tool if any switch does not turn On and Off properly. 16. Do not operate tool if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the tool. 17. People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure. In addition, people with pacemakers should: 18. Some dust created by power sanding, sawing, grinding, drilling, and other construction activities, contains chemicals known [to the State of California] to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: Lead from lead-based paints Crystalline silica from bricks and cement or other masonry products Arsenic and chromium from chemically treated lumber Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. (California Health & Safety Code § 25249.5, et seq.) SKU 44493 Page 3 REV 07j Unpacking When unpacking, check to make sure the following parts are included. Cordless Chainsaw, 18 Volt Battery Pack, Charger, Blade Cover, and Oil Bottle. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible. Battery Precautions 1. Read all instructions and warnings on the battery before charging the battery. 2. To avoid accidents, charge the supplied battery only. Do not use a different charger with this battery. 3. Do not expose the battery (or tool) to rain or wet conditions. 4. To avoid damage of cable and plug, never pull the cable to disconnect the charger. 5. Do not use the charger if the cable or plug are damaged. 6. Repairs should be carried out by qualified technicians only. 7. Do not touch the battery poles with any conductive source. 8. Do not store the battery in a box with other metal objects. 9. Do not throw the battery in a fire. Operational Warnings Warning: Improper use of this chainsaw can cause serious injury or death. 1. Avoid Kickback by not causing the wood to pinch the saw Chain (15). 2. Do not cut using the upper side of the saw Chain. Do not remove the tip guard located on the tip of the saw Chain. The Front Hand Guard must be in place at all times. 3. Firmly grip both handles of the chainsaw while cutting. Never cut with one hand! 4. Begin cutting only when motor is at full speed. 5. Do not overreach or cut above chest height. 6. Cut using the lower side of the saw chain, and always away from your body. 7. Always stop motor before carrying or setting down the chainsaw. 8. Keep bystanders away from the work area. 9. Be prepared for small branches to be caught in the chain path, stopping saw chain movement. Turn off power switch before clearing caught branches. 10. Have a steady footing before cutting. Never cut from atop a ladder. Warning:The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. REV 07j SKU 44493 Page 4 Charging Battery The Battery does not come charged from the factory. Charge for 5 to 6 hours before using. 1. Plug the Charger cord into an electrical outlet. 2. Insert the battery (32) into the Charger Base. The battery can only insert one way. Warning: Never charge battery more than 12 hours continuously. Chargers should not be left plugged in, or charging for more than 12 hours. 4. Press the Set button to start the charging The ON indicator light should come on. If it does not come on, check the power connection or try a different outlet. 5. Charge the Battery for 5 to 6 hours. Subsequent full charges should take less time. When battery is completely charged, the Charger will automatically shut off. The ON Indicator light will turn off, and the OFF indicator will light. 6. After charging, unplug the Charger from the wall outlet. 7. Insert the Battery into the Chainsaw. Note: the operation time of a new battery will ramp up as it is properly used and recharged. Inserting Battery into Unit 1. Insert Battery (32) into the receptacle at the Chainsaw handle bottom. It can only fit in one way. 2. Secure the lock-spring clasps to each side of the handle. Cutting Operation 1. Stand in front of the wood to be cut with your feet firmly ...

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории