Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
Each Orion amplifier is designed to be the leader in its class offering ease of use, advanced features, and the most power. Orion amplifiers are designed as the best affordable high end car audio amplifier money can buy. Listed below are the features of these new Orion amplifiers. ....HCCA10002 -300 Watts (rms) per channel, two-channel amplifier with dual built-in high-pass and low-pass 12dB/octave crossover centered at 100Hz and Intelli-Q. The HCCA10002 is capable of 3, 2, or 1 channel operation with a maximum power of 1000 Watts into 4. mono. ....HCCA10004 -150 Watts (rms) per channel, four-channel amplifier with dual built-in high-pass and low-pass 12dB/octave crossover centered at 100Hz and Intelli-Q. The HCCA10004 is capable of 6, 5, 4, 3, or 2 channel operation with a maximum power capability of 500 (x2) Watts into 4. stereo (channels 1/2 and 3/4 bridged.) Each of these amplifiers have programmable features controlled via a ESP®-2 serial databus and Directed’s proprietary Bitwriter® tool (998T). The Bitwriter® unit must have version 2.7 or above to access the amplifier features menu. The installation of all Orion components will determine the overall performance result. Improper installation will not only limit the performance of your Orion system but also potentially compromise the reliability of this amplifier. To ensure proper sonic results and component reliability, please refer to your authorized Orion dealer for installation assistance or advice. If you decide to perform the installation yourself, be sure to read the entire manual before beginning the installation. © 2009 Directed Electronics. All rights reserved. WHAT’S IN THE BOX ... (1) Amplifier ... (1) Key ... (2) Allen wrenches (3mm & 4mm) ... (1) Orion registration card ... (1) Top Plate (control cover) ... (1) Owner’s manual ... (1) Window decal ... (1) Unique individual amplifier birth certificate PRACTICE SAFE SOUND™ Continuous exposure to sound pressure levels over 100dB may cause permanent hearing loss. High power automotive sound systems can generate sound pressure levels in excess of 130dB. When playing your system at high levels, please use caution and avoid long term exposure. RECORD YOUR SERIAL NUMBER AND DATE To ensure your warranty (see back cover), please record the following information regarding your new amplifier. Model: _______________________________________ Serial Number: _______________________________________ Date of Purchase: _______________________________________ Purchased from: _______________________________________ 2. Speakers (Left channel) ....Connect the speakers to these terminals. END PANEL LAYOUTS (HCCA10002 only, refer to the Speaker Connections section of this guide.) HCCA10002 Figure 1 3. Input -Accepts RCA input from a head unit, preamplifier, or equalizer (HCCA10002 only). RCA Line Output -Provides easy connection to additional amplifiers, the RCA inputs and RCA output are the same signal and are not affected by any amplifier functions. Speakers (right channel) -HCCA10002 only see item 2 Remote Gain Input -Connects optional RGC2 remote gain control to control the gain level from the driver’s seat. 7. GAIN RANGE -Selects the input sensitivity range to either High HCCA10004 (for high power head units) or Low (for line level head units). Speakers (Left Front and Right Front below) ....Connect the speakers to these terminals. (HCCA10004 only, refer to the Speaker Connections section of this guide.) Input (Left Front and Right Front below) -Accepts RCA input from a head unit, preamplifier, or equalizer (HCCA10004 only). Input (Left Rear and Right Rear below) -see item 9 Speakers (Right Rear and Left Rear below) ....see item 8 Figure 2 12. 2/4 Channel Switch -2ch setting will allow 4 channel output with Figura 2 a signal only present on the front inputs. 4 ch will allow a 4 chan- Abbildung 2 nel output when signal is present on the front and rear inputs. 13. Front/Rear Sum Switch -Allows you to sum the front and rear channels together before sending the signal out the RCA line out. 1. ESP -Allows connection of a Directed ESP controller, like the If the switch is not engaged, then only the front left and front Bitwriter. right signals are sent to the RCA line out. ESP REMOTE GAINL INPUT R INPUT L OUTPUT R OUTPUT L CH R CH 1 2 3 4 65 BRIDGE 4 OHM 4. 5.6. Figura 1 Abbildung 1 61 7 8 49 10 11 12 13 ESP RF R RR LF INPUTGAIN RANGE CH MODE LINE OUT L OUTPUT LR INPUTLF RF LR RR HIGH LOW 2 CH 4 CH F/R SUM PASSBRIDGE 4 OHMBRIDGE 4 OHM REMOTE GAIN 8.9. 10. 11. © 2009 Directed Electronics. All rights reserved. © 2009 Directed Electronics. All rights reserved. 4 1 2 3 4 POWER B+ REM GND Recommended wire stripping lengths (L): L (for Power wires): 1.0” (25 mm) L (for Speaker wires): 0.5” (13 mm) L L (for Remote wires): 0.5” (13 mm) Insulated Wire 1. +BAT - connect this terminal through a FUSE or CIRCUIT BREAKER to the positive terminal of the vehicle battery or the positive terminal of an isolated audio system battery. W...
Эта инструкция также подходит к моделям:Автоусилители - HCCA COMPETITION HCCA10004 (968.81 kb)