Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
• Check that no metal objects (coins, tools, etc.) are left inside the unit to avoid short circuits. • If you smell or see smoke, turn the power off immediately and consult your Kenwood dealer. • Do not touch the unit during use because the surface of the unit becomes hot and may cause burns if touched. 2 CAUTION Take the following precautions to keep the unit in proper working order. • Be sure the unit is connected to a 12V DC power supply with a negative ground connection. Accessories • Do not open the • Do not install the exposed to direct sunlight, humidity, water may splash over dust exists. NOTE If you have difficulty in installing this in your vehicle, contact your Kenwood dealer. Cleaning the unit If the surface is dirty, wipe it clean with a silicon cloth or soft dry cloth with the power off. 2 CAUTION Do not use hard cloths or paint thinner, alcohol, or other volatile solvents. These may damage external surfaces or remove indicator characters. Part name External V iew Number of Items Part name External V iew Number of Items Battery cable (Yellow) (6 m) 1 Round terminal (Large) 1 Ground cable (Black) (1 m) 1 Round terminal (Medium) 2 Self-tapping screws (o4 . 16 mm) 4 Round terminal (Small) 1 Terminal cover (Power terminal) 1 Grommets 1 Installation procedure 1. Remove the ignition - terminal of the battery short circuits. 2. Set the unit according 3. Connect the input and output 4. Connect the speaker cables. 5. Connect the power cable, power 6. Install the unit in the car. 7. Connect the negative - terminal of the battery. 2 CAUTION • Be sure to turn the power off before changing • If the fuse blows, check cables for shorts, then • Check that no unconnected cables or connectors Do not remove caps from unconnected cables or connectors to prevent • Connect the speaker cables to appropriate speaker connectors Sharing the negative cable of the speaker or grounding speaker cables cause this unit to fail. • After installation, check that the brake lamps, winkers, and wipers Installation Installation board, etc. (thickness : 15 mm or more) Self-tapping screw (o4 . 16 mm) • Since the power amplifier has no parts which require operation, it can be installed at a position away from the driver’s seat without any hindrances. As generally accepted positions for its installation, places such as inside the trunk, etc. can be considered. • Use the extension cables. (Optional.) Type Length 0.5m 1m 2m 4m 5m 6m RCA cable CA-2SL CA-12SL CA-22SL CA-52SL RCA cable (o7mm) CA-3WL CA-13WL CA-23WL CA-53WL RCA cable (o12mm) CA-5W CA-15W CA-25W CA-45W CA-65W 2 CAUTION • Do not install the unit under the carpet. Otherwise heat build-up occurs and the u...
Эта инструкция также подходит к моделям:Автоусилители - KAC-526X (151.08 kb)