Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
You have purchased a quality product designed and engineered to give you many years of uncompromised musical service. Vibe amplifiers are designed with the latest technology available, incorporating a DC to DC Switching Power Supply, which provides headroom for even the most demanding peaks and dynamic ranges found on modem CD’s and recordings. TABLE OF CONTENTS i Table of Contents Features and Controls 1 vibe 211/221/231/241/251/261 2 vibe 411/421/431 3 vibe 531 4 Specifications 6 Installation System Wiring 7 2 channel stereo 8 2 channel bridged mode 9 2 channel tri-mode 10 2 channel triamp system 11 4 channel stereo 12 4 channel bridged mode 13 4 channel tri-mode 14 5 channel stereo 15 5 channel bridged mode 16 5 channel tri-mode 17 Troubleshooting FEATURES • MOSFET switches maintain rated power over a wide range of battery voltages • Stiffly regulated PWM-type power supplies • 2 Ohm Stable Stereo operation • Variable input level controls for each pair of channels • Variable high and low pass crossover controls • Thermal and speaker short protection circuitry • Power and Protection LED indicators • Bass Boost Circuitry • Stereo, Bridge Mode and Tri-Mode System Application Compatible • Gold plated power, RCA and speaker connectors • High-efficiency, heavy aluminum heatsink • Bass Boost Remote control Janza* Vibe Owner’s Manual Features and Controls VIBE 211/221/231/241/251/261 X. A A 1 • • Min Mom 40 3k [ Input Level Controls Enables the matching of input levels to the output levels from the head unit (or other signal source). High Pass Filter When Crossover Mode Selector is in High Pass Mode, this control limits the frequencies which will be distributed to the speakers to those above the value to which this is set within the range 40HZ-3 kHz. Crossover Mode Selector Determines the mode of built-in crossover: low pass (permits only low frequency signals to pass to speakers), high pass (permits only high frequency signals to pass to speakers), or flat. Power & Protection Indicators Provide instant information on status of amplifier, including short-circuit and thermal overload alerts. lRemote Control Bass Boost Control Increases sound level in lower frequencies by l8dB. Low Pass Filter When Crossover Mode Selector is in Low Pass Mode, this control limits the frequencies which will be distributed to the speakers to those below the value to which this is set within the range 40-350 Hz. X anzar Vibe Owner’s Manual - 1 Features and Controls vibe 411/421/431 Input Level Enables the matching of input levels to the output levels from the head unit (or other signal source). Bass Boost Control Increases sound level in lower frequencies by i8dB, Crossover Mode Selectors Determine the mode of built-in crossovers: low pass (permits only low frequency signals to pass to speakers), high pass (permits only high frequency signals to pass to speakers), or flat. Low Pass Filter When Crossover Mode Selector is in Low P...
Эта инструкция также подходит к моделям:Автоусилители - VIBE221 (763.04 kb)
Автоусилители - VIBE231 (763.04 kb)
Автоусилители - VIBE241 (763.04 kb)
Автоусилители - VIBE251 (763.04 kb)