Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
Plug another telephone line cord into the remaining jack on the back of the NO DIAL TONE ON THE PHONE ATTACHED TO THE CALLER ID UNIT local telephone company, to subscribers of Caller ID or similar caller • Never install telephone wiring during a lightning storm. Caller ID unit and into the answering machine’s Input/Line jack. • Check all cabling to make sure that all connections are secure. to use this unit. identification services. You must subscribe to one of these services in order • Never touch uninsulated telephone wires or terminals, unless the telephone 3. Plug a third telephone line cord into the answering machine phone jack and REMINDER: This product requires a subscription to Caller ID service from your telephone company. line has been disconnected at the network interface. into the telephone. NO DISPLAY Your Caller ID unit enables you to: • Check for proper battery installation. • Use caution when installing or modifying telephone lines. • Identify callers before you answer the phone. TWO-LINE SYSTEM INSTALLATION NO INFORMATION IS SHOWN AFTER THE PHONE RINGS We bring good things to life. • View the time and date of each incoming call. INSTALLING YOUR CALLER ID UNIT You must use two Caller ID units if you • NO DATAappears in the display if no Caller ID signal has been detected, or want to use Caller ID for both lines. You Caller ID service has not been activated by your local telephone company. • Record up to 80 incoming calls sequentially. 1. Plug a telephone line cord into either jack on the back of the Caller ID unit and must also purchase a special two line into the modular jack on the wall. • Be sure to wait until the second ring before answering. • Know who called while you were away. triplex adapter. 2. Plug another telephone line cord into the remaining jack on the back of the ERROR MESSAGE IS DISPLAYED 1. Plug the triplex adapter into your two- BEFORE YOU BEGIN Caller ID unit and into the telephone. line modular wall jack. • ERRORappears in the display if the unit detects anything other than valid DELETE REVIEW Caller ID information during the silent period after the first ring. This message PARTS CHECKLIST 2. Plug your two-line phone into the two- INSTALLATION WITH A STAND-ALONE ANSWERING MACHINE indicates either the presence of noise on the line, or that an invalid message Make sure your package includes the following items: line receptacle on the triplex adapter. The answering machine must be set to answer calls after at least 2 rings to has been sent from the telephone company. properly receive Caller ID information. To use your Caller ID unit with an 3. Plug each Caller ID unit into a single- answering machine: line receptacle on the triplex adapter. 1. Plug a telephone line cord into either jack on the back of the Caller ID unit and into the modular jack on the wall. Telephone line cord Caller ID unit MODULAR JACK REQUIREMENTS OPERATION LIMITED WARRANTY You need an RJ11 type modular jack, which is the most common FCC REGISTRATION INFORMATION type of phone jack and might look like the one pictured here. If REVIEW button DELETE REVIEW M # NEW A CALL LOW REVIEW button NEW CALL indicator DELETE button What your warranty covers: Your GE telephone equipment is registered with the Federal Communications Commission and is in CHOOSING A LANGUAGE REVIEW AND DELETE BUTTONS compliance with parts 15 and 68, FCC Rules and Regulations. you don’t have a modular jack, call your local phone company to • Any defect in materials or workmanship. 1 Notification to the Local Telephone Company find out how to get one installed. This unit can display the message indicators in English (default upon initial For how long after your purchase: REVIEW BUTTONS On the bottom of this equipment is a label indicating, among other information, the FCC Registration battery installation), Spanish, or French. To select a language: number and Ringer Equivalence Number (REN) for the equipment. You must, upon request, provide • One year. • Press REVIEW to see the next record. this information to your telephone company. 1. Press and hold the DELETE button. (The warranty period for rental units begins with the first rental or 45 days still have all of these devices ring when your telephone number is called. In most (but not all) areas, the The REN is useful in determining the number of devices you may connect to your telephone line and When all messages have been viewed, the from date of shipment to the rental firm, whichever comes first.) sum of the RENs of all devices connected to one line should not exceed 5. To be certain of the number POWERING THE CALLER ID UNIT of devices you may connect to your line as determined by the REN, you should contact your local + + + - - - 3. Release both buttons when the display shows the current language. • Press button. LCD displays START/END. 2. Then press the REVIEW What we will do: REVIEW to view previous telephone company. • Provide you with a new or, at our option, a refurbished unit. ...
Эта инструкция также подходит к моделям:Автоответчики - 2-9026 (98.51 kb)