Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
MESSAGES INDICATOR The MESSAGES indicator lets you know when you have new or old messages. • Indicator is on –– There are no new messages, but there are old ones. • Indicator is off –– There are no messages or the answerer is turned off. • Indicator is flashing slowly –– There are new messages. • Indicator is flashing rapidly –– The answerer’s memory is full. ALL button PLAY • STOP ALL NEW MIC ANSWER ON/OFF GREETING MESSAGES ERASE NEXT VOLUME PREVIOUS SET MEMO TAPELESS MESS A G IN G SYSTEM VOICETIME/DAY/STAMP PLAY • STOP ALL NEW MIC ANSWER ON/OFF GREETING MESSAGES ERASE NEXT VOLUME PREVIOUS SET MEMO TAPELESS MESS A G IN G SYSTEM VOICETIME/DAY/STAMP NOTE: An old message is one that has been listened to completely, including the time/day stamp. A new message is one that HAS NOT been listened to completely. PLAYING MESSAGES ERASE button Either old or new messages can be played. To hear all of the messages, including the new ones, press and release the ALL button. To hear only new messages, press and release NEW. • To play messages, press and release ALL or NEW. • To stop playback, press and release ALL or NEW again. • To restart the message that is playing, press and hold PREVIOUS. • To go back to the beginning of a previous message, press and release PREVIOUS. • To skip to the beginning of the next message, press and release NEXT. • To fast forward within a message, press and hold NEXT. • To erase a message while it is playing, press and release the ERASE button. The answerer announces, “Message NEXT PREVIOUS Erased” to confirm the message has been erased. button button ERASING ALL MESSAGES NEW When the answerer isn’t playing or recording messages, button press and hold ERASE until you hear the “Messages Erased” announcement. If you do not have any messages, the unit will announce, “Zero Messages” if ERASE is pressed and held. NOTE: New messages must be heard completely , including the time/day stamp, before they can be erased. LEAVING A MEMO Press and hold the MEMO button. Leave your message after the announcement and the beep. Release the MEMO button when you're finished talking. The unit treats the memo as a message, as the MESSAGES indicator shows. NOTE: The length of time for recording a memo depends on how many messages are currently stored by the answerer. 2-WAY RECORD To record a phone conversation, press and release the MEMO button. Press MEMO again or ALL or NEW when finished. A phone must be off the hook to record. The unit treats the 2-way recorded conversation as a message, as the MESSAGES indicator shows. NOTE: The length of time for recording a conversation depends on how many messages are currently stored by the answerer. SCREENING CALLS (AUTO DISCONNECT FEATURE) You can screen incoming calls by listening as the caller leaves a message. If you want to talk to that caller, pick up any extension phone. MEMO button PLAY • STOP ALL NEW MIC ANSWER ON/OFFGREETING MESSAGES ERASE NEXT VOLUME PREVIOUS SET MEMO TAPELESS MESS A G IN G SYSTEM VOICETIME/DAY/STAMP REMOTE ACCESS You can access your answerer from any touch-tone phone by entering your 3-digit security code (the default security code is 123, but you can change it.) Be aware that remote functions do not work with rotary or push-button pulse- dialing phones. You can cut out the wallet-size remote card on page 19 so you know the touch-tone commands when you're picking up messages from another location. To access your answerer: 1. Call your telephone number. 2. After you hear the beep that follows the greeting, enter your 3-digit security code. To bypass the greeting, you can enter your 3-digit security code any time while the greeting is playing. 3. The unit plays the remote menu after the correct security code has been entered. Menu selections can be made while the menu is playing. NOTE: The unit answers on the 10th ring when it is turned off or the memory is full. To access the answerer, enter the 3-digit security code after the beep. If memory is full, play messages and erase some of them to restore memory. If the answerer is off, press 2 to turn it on. NOTE: After the unit plays the remote menu, it will wait 10 seconds for a command, then disconnect. GENERAL PRODUCT CARE To keep your answerer working and looking good, follow these guidelines: • Avoid putting it near heating appliances and devices that generate electrical noise (for example, motors or fluorescent lamps). • DO NOT expose to direct sunlight or moisture. • Avoid dropping answerer and/or other rough treatment. • Clean with a soft cloth. • Never use a strong cleaning agent or abrasive powder because this will damage the finish. • Retain the original packaging in case you need to ship it at a later date. SERVICE FCC requires this product to be serviced only by the manufacturer or its authorized service agents. In accordance with FCC requirements, changes or modifications not expressly approved by Thomson Consumer Electronics could void the user’s authority to operate this product. Fo...