Оценок - 2, средний балл: 3
(
)
)
|
Фрагмент инструкции
L Even after the handset is fully charged, the handset can be left on the charger without any ill effect on the batteries. L The battery level may not be displayed correctly after you replace the batteries. In this case, place the handset on the charger and let it charge for at least 7 hours. Icon Battery level & High ( Medium ) Low 0)4 Needs charging. 0 Empty For assistance, please visit Getting started 10 For assistance, please visit Controls Base unit A Corded handset B Receiver C Soft keys D Display E {ERASE} F Navigator key ({^}/{V}) VOL.: Volume ({^}/{V}) Repeat/Skip ({7}/{8}) G {6} (Play) Message indicator H {ANSWER ON} I ANSWER ON indicator J {¦} (STOP) (EXIT) K {LOCATOR} {INTERCOM} L Microphone M Speaker N Dial keypad ({*}: TONE) O {SP-PHONE} (Speakerphone) SP-PHONE indicator P {FLASH} {CALL WAIT} Q {REDIAL} {PAUSE} R Speed dial buttons S {HOLD} Handset A Charge indicator Ringer indicator Message indicator B Speaker C Soft keys D {C} (TALK) E {s} (SP-PHONE: Speakerphone) F Headset jack G Dial keypad ({*}: TONE) H Receiver I Display J {OFF} K Navigator key ({^}/{V}) ?: Volume ({^}/{V}) L {FLASH} {CALL WAIT} M Microphone N Charge contacts Getting started Getting started Using the navigator key/volume key (VOL., ?) 7 8 ¦ Scrolling through lists or items By pressing this key ({^} or {V}) repeatedly, you can scroll through (up or down) various lists or items. ¦ Adjusting the volume By pressing this key ({^} or {V}) repeatedly, you can adjust the receiver or speaker volume (up or down) while talking. ¦ Moving the cursor Base unit: {^}, {V}, {7}, or {8} Handset: {^} or {V} By pressing the above keys repeatedly, you can move the cursor to edit a number or name. Soft keys Each unit features 3 soft keys. By pressing a soft key, you can select the feature shown directly above it on the display. Base unit Handset Display Base unit display items Item Meaning S The line is in use. L When flashing: – The call is put on hold. – The answering system is being operated from outside remotely. L When flashing rapidly: an incoming call is now being received. ~ Ringer volume is off. (page 14) & Silent mode is on. (page 25) C The recording time is set to “Greeting only”. (page 35) $ Blocked call (page 26) Handset display items Item Meaning w Within range of a base unit L When flashing: Handset is searching for the base unit. (page 43) S The line is in use. L When flashing: – The call is put on hold. – The answering system is being operated from outside remotely. L When flashing rapidly: An incoming call is now being received. s Speakerphone is on. (page 13) ~ Ringer volume is off. (page 14) & Silent mode is on. (page 25) E Alarm is on. (page 25) m Handset number & Battery level $ Blocked call (page 26) For assistance, please visit Getting started Getting started Initial settings Symbol meaning: Symbol Meaning = Perform with the base unit. Y Perform with the handset. Example: {V}/{^}: “Off” Press {V} or {^} to select the words in quotations. Display language You can select either “English” or “Espanol” as the display language. The default setting is “English”. = Base unit / Y Handset 1 {MENU} i {#}{1}{1}{0} 2 {V}/{^}: Select the desired setting. 3 Press the middle soft key to save. 4 Proceed with the operation for your unit. Base unit: {¦} (EXIT) Handset: {OFF} Voice guidance language You can select either “English” or “Espanol” as the voice guidance language of the answering system. The default setting is “English”. Y Handset 1 {MENU} i {#}{1}{1}{2} 2 {V}/{^}: Select the desired setting. 3 {SAVE} i {OFF} Dialing mode If you cannot make calls, change this setting according to your telephone line service. The default setting is “Tone”. “Tone”: For tone dial service. “Pulse”: For rotary/pulse dial service. Y Handset 1 {MENU} i {#}{1}{2}{0} 2 {V}/{^}: Select the desired setting. 3 {SAVE} i {OFF} Date and time Y Handset 1 {MENU} i {#}{1}{0}{1} 2 Enter the current month, date, and year by selecting 2 digits for each. Example: July 15, 2009 {0}{7}{1}{5}{0}{9} 3 {OK} 4 Enter the current hour and minute (12-hour clock format) by selecting 2 digits for each. Example: 9:30 {0}{9}{3}{0} 5 {AM/PM}: Select “AM” or “PM”. 6 {SAVE} i {OFF} Note: L When English is selected as the display language, 12-hour clock format is used. When Spanish is selected, 24-hour clock format is used. L To correct a digit, press {^} or {V} to move the cursor to the digit, then make the correction. L The date and time may be incorrect after a power failure. In this case, set the date and time again. For assistance, please visit Making/Answering Calls Making calls Using the base unit = 1 Dial the phone number. L To correct a digit, press {CLEAR}. 2 Lift the corded handset. 3 When you finish talking, place the corded handset on the cradle. Note: L You can also dial the phone number after lifting the corded handset. Using the speakerphone 1 Duri...
Эта инструкция также подходит к моделям:Автоответчики - KX-TG1063 (2.16 mb)
Автоответчики - KX-TG1062 (2.16 mb)