Войти:
Оценок - 1, средний балл: 5 ( )

Инструкция по эксплуатации Radio Shack, модель 43.142

Производитель: Radio Shack
Размер: 1.3 mb
Название файла: 4300144_PM_EN.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Contents Features 3 Introduction 4 Selecting a Location 4 Installing the Charger 5 Connecting/Charging the Battery 5 Installing a Belt Clip 8 Using an Optional Headset 8 Registering the Handset 9 Resetting Handsets 10 Resetting the Handset Without the Base 11 Controls & Functions 12 Reading the Display 13 Using Your Accessory Handset 17 Using Hold, Conference, Transfer and Intercom 23 Care 25 Service and Repair 25 FCC Statement 25 Glossary 27 Limited One-Year Warranty 28 Features Additional Handset — lets you add up to ten additional handsets to expand your telephone system (RadioShack 43-141, 43-142 or 43-143). You can even transfer an outside call or make an intercom conversation between handsets. 5.8 GHz Digital Spread Spectrum System — spreads the signal across several frequencies, providing additional security for your phone conversation. 10 Tone and 10 Melody Ringer Control — lets you control the way the ring sounds. Voice Mail/Message Indicator — lets you know a message is waiting. Handsfree Operation — allows you to talk while your hands are occupied for other tasks. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning symbol is intended to alert you to the presence of uninsulated dangerous voltage within this product’s enclosure that might be of sufficient magnitude to constitute a risk of electric shock. Do not open the product’s case. The exclamation symbol is intended to inform you that important operating and maintenance instructions are included in the literature accompanying this product. CAUTION: TO REDUCE THE RISK OF ELECTRIC WARNING: To reduce the risk of fire SHOCK, DO NOT REMOVE COVER OR BACK. NO USERSERVICEABLE PARTS INSIDE. REFER or shock hazard, do not expose this product to rain or moisture. SERVICING TO QUALIFIED PERSONNEL. Introduction Thank you for purchasing this RadioShack 5.8 GHz Accessory handset. Your handset is designed for use with a RadioShack 5.8 GHz Expandable Cordless Telephone. You can use this handset in any room in your home or office that has an AC outlet. You can also transfer an outside call to another handset. This handset is designed to work only with a RadioShack 5.8 GHz Expandable Cordless Telephone (Cat. No. 43-141, 43-142 and 43-143). Do not try to use it with other cordless telephones. Selecting a Location Select a location for the base that is near an accessible AC standard wall outlet and away from electrical machinery, electrical appliances, metal walls, filing cabinets, wireless intercoms, alarms, room monitors, and other cordless phones. Installing the Charger You can power the charger using the supplied 9V, 210 mA AC adapter. Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack on the bottom of the charger. Route the cord through the strain relief slot and plug the adapter into a standard AC outlet. Caution: You must use a Class 2 power source that supplies 9V DC and delivers at least 210 mA. Its center tip must be set to positive and its plug must fit the charger’s DC IN 9V jack. The supplied adapter meets these specifications. Using an adapter that does not meet these specifications could damage the handset or the adapter. Connecting/Charging the Battery The phone comes with a rechargeable nickel metal hydride (Ni-MH) battery pack. The supplied battery pack should last for about a year. If the battery pack does not hold a charge for more than 2 hours after an overnight charge, replace it with a new 3.6 volt, 750 mAh battery pack with a connector that fits the socket in the battery compartment. You can order a replacement battery pack through your local RadioShack store or online at Before using your phone, you must install the battery pack, and then charge it for about 15-20 hours. 1. Press down and slide the battery compartment cover off. 2. Plug the battery pack’s connector into the socket in the compartment (the connector fits only one way), then place the battery pack in the compartment. MODELS VARY! PLACE HANDSET ON THE BASE FOR REGISTRATION OR REFER TO OWNER’S MANUAL appears. 3. Replace the cover. To charge the battery pack, place the handset on the charger. The CHARGE indicator on the charging cradle lights. Proceed to “Registering the Handset” on page 9. Important: Be sure the battery pack is properly connected before you try to charge it. The CHARGE indicator lights when the handset is on the charger. Recharge the battery pack when LOW BATTERY appears. • About once a month, use a damp cloth to clean the charging contacts on the handset. • If the battery pack becomes weak during a call, the handset beeps and LOW BATTERY appears. When this happens, you cannot make a call until you recharge the battery pack. • If the display is blank and the phone does not work, recharge the battery pack. (The battery power might be too low to light the display.) About once a month, fully discharge the battery by keeping the handset off the base or charger until LOW BATTERY stays lit. Otherwise, the bat...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории