Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
Use the separately sold TV tuner unit KV-C1001 for optional television broadcast reception. For installation and connections, refer to the separate manual. INSTRUCTIONS LVT1341-001B [E] ENGLISH WARNINGS • DO NOT INSTALL THE MONITOR IN A LOCATION WHICH OBSTRUCTS DRIVING, VISIBILITY, SAFETY DEVICE FUNCTION SUCH AS AIR BAGS OR WHICH IS PROHIBITED BY APPLICABLE LAWS AND REGULATIONS. • There may be legal regulations defining the permissible installation locations for the monitor which differ by country or by state. Be sure to install the monitor in a correct location according to such laws. • The driver must not operate the monitor while driving. * Stop your vehicle in a safe location when operating the monitor. • The driver must not watch the television or playback pictures while driving. If the driver does it while driving, it may lead to carelessness and cause an accident. • Keep the monitor at an appropriate sound level while driving. Driving with the sound at a level that prevents you from hearing sounds outside of and around the vehicle may cause an accident. • Be sure not to let the monitor fall or be strongly impacted since this may cause a malfunction or fire. • Do not use the monitor with the engine off. Doing so with the engine off will consume battery power and may prevent the engine from starting. • When not in use, close the liquid crystal panel and store it into the compartment. • Do not touch the surface of the liquid crystal panel directly. • Do not hang any object on the monitor or hang down, as this may damage the monitor. CAUTION: This monitor should be used on DC 12 V only. To prevent electric shocks and fire hazards, DO NOT use any other power source. Installation requires some special knowledge. Do not install the monitor yourself. Consult a dealer having special knowledge of this kind for safe and reliable installation. CAUTIONS on the supplied headphones —KS-HP2: • DO NOT leave the headphones in a place exposed to direct sunlight for a long time, such as a dashboard, as they may be damaged. • Keep the headphones away from a cellular phone to avoid interference. • DO NOT turn off the power with the volume set at high level, as the sudden blast of sound can damage your hearing and/or headphones next time you use the headphones. • If you experience a ringing in your ears, reduce volume or stop using the headphones. Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. Caution on volume setting: Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level. ENGLISH How to reset your monitor How to read this manual ENGLISH This will reset the microcomputer. Your preset adjustments will also be erased. How to forcibly eject a disc If a disc cannot be recognized by the monitor or cannot be ejected... The disc comes out. • If this does not work, reset your monitor. • Be careful not to drop the disc when it ejects. Monitor (for about 5 seconds while power is on) The following methods are used to make the explanations simple and easy-to-understand: • Some related tips and notes are explained in “More about this monitor” (see pages 33 – 35). • Button operations are mainly explained with the illustrations as follows: Press briefly. Press repeatedly. Press either one. Press and hold until your desired response begins. Press and hold both buttons at the same time. Contents How to reset your monitor ..................... 4 How to forcibly eject a disc ................... 4 How to read this manual ........................ 4 Precautions .................................... 6 Widescreen monitor ....................... 7 Parts identification ................................. 7 Remote controller — RM-RK230 ....... 8 Main elements and features ................... 8 Headphones — KS-HP2.................... 10 Main elements and features ................... 10 Basic operations ............................. 11 Adjustments .................................. 13 Using the monitor menu ........................ 13 Changing the asp...