Оценок - 2, средний балл: 3
(
)
)
|
Фрагмент инструкции
To restore the antenna digital channel database, reconnect the antenna and use the menu system to perform an All Channel Search. . NOTE: After Channel Search is complete, the DTV will tune to the lowest Digital Cable channel. SYMPTOM CHECK THESE CONDITIONS TRY THESE SOLUTIONS HELP HINTS (PROBLEMS/SOLUTIONS) Cannot select menu option, DIGITAL CABLE SEARCH. Did the word Not Available appear on-screen? DTV must be connected to a digital signal. The DTV is in the Analog mode, therefore, try performing another “All Channel Search.” If you continue to experience problems, please call toll free 1-800-877-5032. We can Help! MENU OPTION—DIGITAL ADD-ON SEARCH To add new digital channels to the existing antenna channel database, use Digital Add-on Search. Also, use this feature to add channels when broadcast towers are in multiple directions from your location. For more info go to and type in your zip code to obtain specific tower and antenna information. Then adjust your antenna and repeat the Digital Add-on Search. 4 Use the CURSOR key to select Yes. Press ENTER. 1 Tune to a Digital Channel. 2 Press the MENU key to display the Main menu. 3 Use the CURSOR keys to highlight the Digital Add-on Search. Press ENTER. HELP HINTS (PROBLEMS/SOLUTIONS) SYMPTOM CHECK THESE CONDITIONS TRY THESE SOLUTIONS Cannot select menu option, DIGITAL Did the word Not Available The DTV is in the Analog mode, ADD-ON SEARCH. appear on-screen? therefore, try performing another “All Channel Search.” DTV must be connected to a digital signal. If you continue to experience problems, please call toll free 1-800-877-5032. We can Help! MENU OPTION—ANALOG ANTENNA SIGNAL (Optional) Use this feature to switch between analog off-air Use the CURSOR keys to choose Cable or 4 channels and analog cable channels. VHF/ UHF. Press ENTER. 1 1 Tune to an Analog Channel. Press the MENU key to display the Main menu. 32 Use the CURSOR keys to highlight Analog Antenna Signal. Press ENTER. HELP HINTS (PROBLEMS/SOLUTIONS) SYMPTOM CHECK THESE CONDITIONS TRY THESE SOLUTIONS Cannot select menu option, ANALOG ANTENNA SIGNAL. NO Cable channels above number 13 NO UHF; VHF Channels OK. Did the word Not Available appear on-screen? Cable Channel Indicator “C” should appear next to channel number. Cable Channel Indicator C should notappear next to the channel number. Press INPUT Key to select TV Analog mode. Switch Menu option–Analog Antenna Signal selection to CABLE. Switch Menu option–Analog antenna signal to VHF/UHF. If you continue to experience problems, please call toll free 1-800-877-5032. We can Help! MENU OPTION—CHANNEL SCAN MEMORY DELETING ANALOG OR DIGITAL Use the CHANNEL (CH ) keys or numerical 3 0 ~ 9 keys to select desired channel. CHANNELS FROM MEMORY 4 4 Press the ENTER key to delete the channel. The Channel Scan Memory is a list of active channels that display will change to “deleted.” you can scan through using the Channel Scan CH (up) CH (down) keys. This list can be customized by deleting and/or adding channels. 1 1 Press the MENU key to display the Main menu. 2 2 Use the CURSOR keys to highlight Channel Scan Memory. Press ENTER. After 3 seconds the TV screen will display “Add?” OPERATING TIPS: When a digital channel is deleted, all of that channel’s sub-channels are deleted as well. Only previously deleted digital channels can be added back to the Channel Scan Memory. HELP HINTS (PROBLEMS/SOLUTIONS) SYMPTOM CHECK THESE CONDITIONS TRY THESE SOLUTIONS Cannot select or scan some Channels may be removed from Select Channel Scan memory and channels. memory. manually add channels or start an Check antenna connections. “All Channel Search.” NO digital signal being broadcast. Weak Signal. Turn antenna, install signal booster. V-Guide is set to block programming. Set V-Guide to “Off” or press RESET key to clear all settings and restart channel search. If you continue to experience problems, please call toll free 1-800-877-5032. We can Help! MENU OPTION—CHANNEL SCAN MEMORY ADDING DIGITAL OR ANALOG Use the CHANNEL (CH ) keys or numerical 3 0 ~ 9 keys to select desired channel. CHANNELS TO MEMORY 4 4 Press the ENTER key to add the channel. The Channel Scan Memory is a list of active channels that display will change to “added.” you can scan through using the Channel Scan CH ^ (up) CH (down) keys. This list can be customized by deleting and/or adding channels. 1 1 Press the MENU key to display the Main menu. 2 2 Use the CURSOR keys to highlight Channel Scan Memory. Press ENTER. After 3 seconds the TV screen will display “Delete?” OPERATING TIP: If one digital sub-channel is added back to the Channel Scan Memory list, all of that channel’s sub-channels will be added back. HELP HINTS (PROBLEMS/SOLUTIONS) SYMPTOM CHECK THESE CONDITIONS TRY THESE SOLUTIONS Cannot select or scan some Channels may be removed from Select Channel Scan memory and channels. memory. manually add channels or start an Check antenna connections. “All Ch...