Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your KENWOOD dealer for information or service on the product. Model Serial number © PRINTED IN JAPAN B64-2631-00/00 (E/K) Ensure that the unit is securely installed. Otherwise it may fly out of place during collisions and When extending the ignition or ground cables, make sure to use automotive-grade cables or WG18) or more to prevent wire deterioration and o prevent short circuits, never put or leave any metallic objects (e.g., coins or metal tools) inside If the unit starts to emit smoke or strange smells, turn off the power immediately and consult Do not touch the liquid crystal fluid if the LCD is damaged or broken due to shock. The liquid If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap Keep a cellular phone or other things that oscillate high frequency away from this unit. If not, the Safety PrecautionEnglish Use of this video unit in any front seat and/or where it may be visible to the driver may be illegal in some states and may cause driver distraction and accident which could injure or kill you. Ensure that the unit is securely installed. Otherwise it may fly out of place during collisions and When extending the ignition or ground cables, make sure to use automotive-grade cables or WG18) or more to prevent wire deterioration and o prevent short circuits, never put or leave any metallic objects (e.g., coins or metal tools) inside If the unit starts to emit smoke or strange smells, turn off the power immediately and consult Do not touch the liquid crystal fluid if the LCD is damaged or broken due to shock. The liquid If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap Keep a cellular phone or other things that oscillate high frequency away from this unit. If not, the Safety PrecautionEnglish Use of this video unit in any front seat and/or where it may be visible to the driver may be illegal in some states and may cause driver distraction and accident which could injure or kill you. 2 English English 3 LZ-651W Basic Operation 1 Mode Setting switch Selects the target device to control. MON: Monitor control mode NAVI: Navigation system control mode AUD: Kenwood car audio system control mode 2 Volume Control button 3 Power button 4 Cursor button Selects the item when the menu screen is displayed. 5 Enter button Performs selected item when the menu screen is displayed. 6 Menu Display button Displays the menu screen. (page 4) 7 Video Source Select button Each time the button is pressed the monitor’s picture switches as the navigation picture or the video picture set to "AV-IN". 8 Audio Source Select button Each time the button is pressed the audio source switches as follows: When the voice guidance event for the navigation system takes place, the audio source switches temporarily to the sound used by the navigation system even with the sound through the AV-IN being output. 9 Screen Mode Select button Each time the button is pressed the screen mode switches as follows. [FULL] [ZOOM] [JUST] [CINEMA] [NORMAL] .. NORMAL NAV AV-IN OFF Sound of monitoring picture selected by [Video Source Select] button. Sound of navigation system. Sound of input video picture from AV-IN. No sound. Set Mode Setting switch to "MON" position while operating this LCD monitor. Refer to the instruction manual for the operation of the navigation system. Display the setup screen for 5 seconds as follows: • Screen mode • Video source • Audio source • Volume + AV OUT CANCEL MENU .,?-& ABC DEF GHI JKL MNO PQRS TUV WXYZ BS SBF SPACE POS ROUTE AV OUT ZOOM PWR SRC MENU DIRECT ATT NAV/ VIDEO PWR SRC MENU DIRECT ATT NAV/ VIDEO CANCEL MENU AUDIO SUBTITLE ANGLE CLEAR POS ROUTE MON NAVI AUD MON NAVI AUD BAND DISC M/S BAND DISC M/S OUT IN ZOOM OUT IN SC2 VOICE SC1 OPEN ENTER MODE English English Setting Menu MENUMENU Press button. 1 Menu screen is displayed, and the monitor enters to menu mode. Press or button to select the adjusting item, 2 ENTER and press VOICE button. "SCREEN CONTROL": Adjust the picture quality (brightness, contrast etc.). "SETUP": Setup the picture input method and the beep sound. Screen control MENUMENU Press button. 1 ENTER Select "SCREEN CONTROL", and press VOICE button. 2 Press or button to select the adjusting item. 3 "BRT": Adjusts brightness. "TINT": Adjusts tint. (Display while displaying the picture from the NTSC signal.) "COL": Adjusts color. (Display while displaying the picture from the PAL signal and the NTSC signal.) "CONT": Adjusts contrast. "BLK": Adjusts the black level. "DIM": Adjusts the dimmer when it gets dark. Press or button to adjust each item. 4 Select "RETURN" and press to end the Menu 5 mode. Also, the monitor exits from Menu mode by no opeation for 10 seconds. VOICE ENTER 4 English Setup MENU Setup...