Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
THIS DEVICE COMPLIES WITH FCC RULES PART 15. Operation of this device is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference that may be received, including interference that may Cause undesired operation Safety Rules............................................................................... 2 Features of Your Opener ........................................................... 3 Specifications ............................................................................ 3 Tools You'll Need ...................................................................... 3 Completed Installation Illustrations ............................................ 4 Operation of Your Opener .......................................................... 5 Accessories .............................................................................. 5 Care & Maintenance of Your Opener ........................................ 6 Assembly Instructions................................................................ 7 Installation Instructions.............................................................. 10 Travel Limit Adjustments .......................................................... 20 PAGECONTENTS Force Adjustments .................................................................... 21 Safety Reverse Test ................................................................. 22 The Protector System Accessory ............................................. 22 Setting/Changing Code ............................................................. 23 Having A Problem? ................................................................... 24 Carton Contents & Hardware Illustrated ................................... 26 Repair Parts, Rail Assembly ..................................................... 26 Repair Parts, Installation.............................................................26 Repair Parts, Chassis Assembly .............................................. 27 How to Order Repair Parts ........................................................28 Warranty ...................................................................................28 CONTENTS PAGE FASTEN THIS MANUAL NEAR THE GARAGE DOOR AFTER INSTALLATION. PERIODIC CHECKS OF THE OPENER ARE REQUIRED TO INSURE SATISFACTORY OPERATION. ADJUSTMENT STEP 1 Adjust UP and DOWN Limits LIMIT ADJUSTMENT settings regulate the points at which the door will stop when moving up or down. NOTE: Door STOPS In the UP direction If anything interferes with door travel. Door REVERSES in the DOWN direction It anything interferes with the door travel (including binding or unbalanced doors). PROCEDURE: To operate the opener, press the Door Control Button. Run the opener through a COMPLETE TRAVEL CYCLE. No limit adjustments are necessary when the door opens and closes completely and doesn't reverse unintentionally when fully closed. The following chart outlines adjustment procedures. Run the opener through a COMPLETE TRAVEL CYCLE AFTER EACH ADJUSTMENT. NOTE: REPEATED OPERATION OF THE OPENER DURING ADJUSTMENT PROCEDURES MAY CAUSE MOTOR TO OVERHEAT AND SHUT OFF. SIMPLY WAIT 15 MINUTES AND TRY AGAIN. Read the chart carefully before proceeding to Step 2. Use a screwdriver to make limit adjustments. LIMIT ADJUSTMENT CHART IF DOOR DOES NOT OPEN COMPLETELY BUT OPENS AT LEAST FIVE FEET Increase UP travel. Turn the UP LIMIT adjustment screw clockwise. One turn equals 2" of travel. If door does not open at least 5 feet: adjust UP (OPEN) FORCE as explained in Step 2. IF DOOR DOES NOT CLOSE COMPLETELY Increase DOWN travel. Turn down limit adjustment screw counterclockwise. One turn equals 2" of travel. If the door still will not close completely, the header bracket is positioned too high. See Step 1, page 10. IF OPENER REVERSES IN FULLY CLOSED POSITION Decrease DOWN travel. Turn down limit adjustment screw clockwise. One turn equals 2 inches of travel. IF DOOR REVERSES WHEN CLOSING AND THERE IS NO INTERFERENCE TO TRAVEL CYCLE Test door for binding: Pull manual release handle. Manually open and close door. If door is binding, call for garage door service. If door is not binding or unbalanced, adjust DOWN (CLOSE) FORCE. See Step 2. 20 ADJUSTMENT STEP 2 Adjust Force DO NOT USE FORCE ADJUSTMENTS TO COMPENSATE FOR A BINDING OR STICKING GARAGE DOOR. EXCESSIVE FORCE WILL INTERFERE WITH PROPER OPERATION OF SAFETY REVERSE SYSTEM OR DAMAGE GARAGE DOOR. Force Adjustment Controls are located on rear panel of opener. FORCE ADJUSTMENT settings regulate amount of the power required to open and close door. NOTE: The door STOPS in the UP direction if anything Interferes with its travel. Door REVERSES In the DOWN direction If anything interferes with Its travel (Including binding or unbalanced doors). If the force adjustments are set too light, door travel may be interrupted by nuisance reversals in DOWN direction and stops in UP direction. Weather conditions can ...