Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
RSL12V ™ & RSL12VH ™ RSW12V ™ & RSW12VH ™ Installation Date Please contact your authorized LiftMaster dealer for all of your service needs. OPEN RESET SWITCH/BUTTON The reset switch/button is located on the front of the operator and serves several functions. OPERATION Thank you for purchasing a LiftMaster gate operator. Our operators are designed to meet or exceed UL325 safety standards and requirements and are quality manufactured for years of safe and reliable service. Think LiftMaster for all of your Access Control needs. MODEL RSL12V SLIDE GATE OPERATOR Model RSL12V has a reset switch. When referring to “toggling” the reset switch it means pressing the reset switch to the RESET/DISCONNECT position, then back to the NORMAL OPERATION position. To open and close the gate(s) manually, press the reset switch to the RESET/DISCONNECT position. On a dual gate application the reset switch must be pressed on both operators. To resume normal function press the reset switch to NORMAL OPERATION. MODEL RSW12V SWING GATE OPERATOR Model RSW12V has a reset button. To open and close the gate(s) manually, press the reset button. On a dual gate application the reset button must be pressed on both operators. The next command given by a remote control will close the gate and return the operator to normal operation. 1 OPEN OPEN SLEEP MODE The operator enters sleep mode 10 seconds after the last command is given. The photoelectric sensor indicator LEDs will not be on. The next command given will return the operator to normal operation. REMOTE CONTROL Once the remote control has been programmed operator will operate as follows: When gate is in the closed position, activation of the remote control button will open the gate. During the open cycle another activation of the remote control will stop the gate and the next activation of the remote control will close the gate. When the gate is in the open position, activation of the remote control button will close the gate. If a contact sensor detects an obstruction twice consecutively the alarm will sound (up to 5 minutes) and the operator will need to be reset. The gate does not meet specifications. Debris is on the gate's track such as mud, rocks, dirt, etc. (Slide Only) The gate has one or more broken axles or wheels. (Slide Only) The gate wheel is off the gate rail. (Slide Only) The gate is hitting a wall or vehicle. NOTE: In dual gate applications the reset switch/button must be toggled/pressed on the primary operator. Remove any obstructions. Toggle/press the reset switch/button to shut off the alarm and reset the operator. After the operator is reset, normal functions will resume. When the inherent force of the operator (RPM/current sensor) detects the following (twice consecutively) the alarm will sound (up to 5 minutes) and the operator will need to be reset: Gate hinges are too tight or broken and the gate is not moving freely. (Swing Only) The gate is moving and a car pushes the gate. (Swing O...
Эта инструкция также подходит к моделям:Автоматические ворота - RSL12VH (2.29 mb)
Автоматические ворота - RSW12V (2.29 mb)
Автоматические ворота - RSW12VH (2.29 mb)