Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
2. You can quickly press and release the "Close Travel Limit" button to move the door in small increments. You can also use the "Open Travel Limit" button to move the door slightly in the UP direction. 3. Door is fully closed when the bottom edge of door presses firmly onto the ground. 4. Once the door is in the desired position, press and hold the "Close SET Limit" button for 5 seconds. The LED indicator light will blink green once. This stores the closed position in memory. C) OPEN TRAVEL LIMIT 1. Press and hold the "Open Travel Limit" button to move the door to its fully opened position. This starts the opener moving in the UP direction. 2. Hold the "Open Travel Limit" button until the door is in the fully opened position that you desire, then release this button. 3. You can quickly press and release the "Open Travel Limit" button to move the door in small increments. You can also use the "Close Travel Limit" button to move the door slightly in the SET A) ENGAGE CHAIN/BELT CONNECTOR TO CARRIAGE 1. Press and hold the "Close Travel Limit" button until the chain or belt connector advances and engages to the Carriage Assembly (Fig. 6-2). DOOR LIMITS6 The OPEN (UP) and CLOSE (DOWN) door positions are controlled by making the adjustments on the panel located on the bottom of the power head. The adjustments that can be made are: • Close Travel Limit, • Open Travel Limit, Adjust Closing Force Adjust Opening Force Transmitter Programming SETTING & TESTING OPEN/CLOSE LIMITS • Severe injury or death can result if the door closing force is set too high. • Never increase the door closing force above the minimum required to move the door. • Never adjust force to compensate for a sticking or binding door. • Perform monthly CONTACT REVERSE TEST as described on page 22 and in Section 10. WARNING B) CLOSE TRAVEL LIMIT 1. Press and hold the "Close Travel Limit" button until the door is fully closed. 2. You can quickly press and release the "Close Travel Limit" button to move the door in small increments. You can also use the "Open Travel Limit" button to move the door slightly in the UP direction. 3. Door is fully closed when the bottom edge of door presses firmly onto the ground. 4. Once the door is in the desired position, press and hold the "Close SET Limit" button for 5 seconds. The LED indicator light will blink green once. This stores the closed position in memory. C) OPEN TRAVEL LIMIT 1. Press and hold the "Open Travel Limit" button to move the door to its fully opened position. This starts the opener moving in the UP direction. 2. Hold the "Open Travel Limit" button until the door is in the fully opened position that you desire, then release this button. 3. You can quickly press and release the "Open Travel Limit" button to move the door in small increments. You can also use the "Close Travel Limit" button to move the door slightly in the SET A) ENGAGE CHAIN/BELT CONNECTOR TO CARRIAGE 1. Press and hold the "Close Travel Limit" button until the chain or belt connector advances and engages to the Carriage Assembly (Fig. 6-2). FOR HELP-1.800.354.3643 OR WWW.GENIECOMPANY.COM FIG. 6-1 Limit controls. SET SET OPEN FORCE CLOSE CODE LEARN LIMITMANUAL Open Travel Limit Open Set Limit Button Close Travel Limit Close Set Limit Button Down Force Control Adjustment Up Force Control Adjustment Learn Code Button LED Indicator Light To Garage Door Limit Controls location on power head. Carriage Assembly Chain Connector Latch Movement Latch Movement Move in this direction Carriage Assembly Belt Connector Latch Movement Latch Movement Move in this direction FIG. 6-2 Engage Chain/Belt Connector to Carriage. Operation of the opener without the Chain or Belt Connector engaged to the Carriage Assembly will result in damage to rail components including the rail pulley. CAUTION Failure to verify the engagement of the belt/chain connector will result in damage to rail components. CAUTION NOTE: Set Close Travel Limit before setting Open Travel Limit for unit to operate normally. Unless limits are being reset do not press set limit buttons. DOWN direction. 4. Once the door is in the desired position, press and SET hold the "Open SET Limit" button for 5 seconds. The LED indicator light will blink green twice. This stores the opened position in memory. PN# 37026500123 02/26/2010 REV. 1 CARRIAGE LOCK The Carriage Lock can be manually engaged or disengaged. • To disengage Carriage Lock – Pull handle downward opener power head. • To engage Carriage Lock – Pull handle towards door. UNLOCK DOOR LOCK TO RECONNECT PULL TOWARD DOOR TO RELEASE PULL TOWARD THE OPENER FIG. 6-3 Engage/Disengage Carriage Lock. KEYED EMERGENCY RELEASE (PURCHASED SEPARATELY) Obtain standard emergency release kit and remove S-hook from the cable end that attaches to the opener carriage. 1. Attach the emergency release cable loop end to the opener carriage as shown (FIG 6-4). Properly connecting the release cable to the carriage fitting will enable the correct carriage release...
Эта инструкция также подходит к моделям:Автоматические ворота - 2022 (16.87 mb)
Автоматические ворота - 2024 (16.87 mb)