Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
At this price point, the construction provides a substantially higher thermal efficiency than industry standard polystyrene doors. The Wayne-Dalton Thermospan Series doors are the only doors in the industry with patented, roll-formed integral struts on each section, making them the most rigid doors available. WAYNE- DALTON COMMERCIAL DOOR SYSTEMS • EXCEPTIONAL THERMAL QUALITIES (R-VALUE = 10.79, U-VALUE = 0.093) • STANDARD SIZES UP TO 16’ 2” WIDE AND 16’ 1” HIGH • COMPETITIVELY PRICED • COMMERCIAL DURABILITY • INTEGRAL STEEL STRUTS FOR SUPERIOR STRENGTH SECTIONAL DOOR SYSTEMS THERMOSPAN ® 125 Ideal for applications where energy efficiency is important, and competitive cost is essential, Wayne-Dalton’s Thermospan 125 sectional door features a foamed-in-place polyurethane core firmly bonded to hot-dipped galvanized inner and outer skins. Integral roll-formed struts per section add rigidity and strength, making the Thermospan 125 suitable for commercial and industrial applications. The patented Thermospan design demonstrates that overhead doors need not be the weak link in an energy-efficient building. Materials & Construction Thermospan 125 doors feature pre-painted inner and outer skins made from hot-dipped galvanized steel for added corrosion protection.The exterior suface is pebbled and grooved, enhancing the appearance while providing improved strength, and each section is reinforced with two 13/4" integral roll-formed struts for even greater rigidity. Hot-dipped 18-gauge galvanized end caps offer a superior surface for hinge attachment. Our standard joint seal prevents air infiltration and, in conjunction with the solid polyurethane core, offers enhanced energy efficiency. Factory-installed vision lites (24" x 6") are available, as are automatic door openers. Contact Wayne-Dalton for additional sizes and colors. Window Options Standardjointsealpreventsairinfiltrationandsavesenergy. Pre-painted(whitepolyesterfinish) innerandouterskinsprovidecorrosionresistance.Bothskinsarehot-dippedgalvanizedsteelforfurtherprotectionagainstcorrosion. Pinstripes(grooves)andpebblefinishonouterskinaddstrengthandenhanceappearance. Twopatented,integral13/4"roll-formedstrutspersectionaddrigidityandstrength. (*industryexclusive) 18-gaugehot-dippedgalvanizedsteel“wrap-around”endcapsofferinteriorhingeattachmentsurfaceandexteriorlegforpropersealagainstjamb. Solidpolyurethanecoreaddstoinsulatingefficiency. ExtendedLimitedWarranty TEN(10)YEARSagainstcracking,splittingordeteriorationduetorust. SEVEN(7)YEARSagainstseparationofpolyurethanefromthesteelskinofthepanel. Performance Options Operation Options VisionLitesallowforvisibilitywhilemaintainingsecurity • High Cycle Spring (25K,50K,100K) • Chain Hoist Operation • 3"Track Option • Motor Operation • Solid Shafts • PerimeterWeatherseal Color Special Application Options WhiteEmbossedStuccoFinish • SpecialTrack Designs • Mullions Safety Options • Safety Edge • Safety Photo Eyes STANDARD SIZES UP TO: 16’ 2” WIDE & 16’ 1” HIGH ENERGY EFFICIENCY VALUES: U = 0.093 R = 10.79 WINDLOAD: GeneralOperatingClearances MEET OR EXCEED ANSI/DASMA 102-2003 IN ACCORDANCE WITH ASTM E-330-70. BEST APPLICATIONS: When insulation and economy are needed. U.S. Patent Nos. 4238544 and 4339487 Type Headroom*** Sideroom** Depth Into Room Center Line of Springs 2" track 3" track 2" track 3" track 2" & 3" track 2" track 3" track Standard Lift Manual12"R 121.2-17" NA 41.2" 51.2" Opening Height +18" Opening Height +12" NA Standard Lift Manual15"R 141.2-20" 151.2-21" Opening Height +13" Opening Height +14" Standard Lift Motor Oper. 12"R Standard Lift Motor Oper. 15"R 15-191.2" NA Opening Height +66" Opening Height +12" NA 15-191.2" 18-231.2" Opening Height +13" Opening Height +14" High Lift Manual Door Height +12" Opening Height – Lift +30" Opening Height +Lift +61.2" Opening Height +Lift +71.2"High Lift Motor Oper. 24" One Side Vertical Lift Manual 12"R Door Height +20" 41.2" 51.2" Opening Height +18" Double Door Height +13"Vertical Lift Motor Oper. 12"R 24" One Side Low Headroom Manual* 6-141.2" 6-141.2" 6" 9" Opening Height +20" -26" Does Not Apply Low Headroom Motor Oper.* 81.2-17" 81.2-17" Opening Height +66" Panel/Section Selection Guide *Note: Rear mount torsion requirements shown on chart. See Door Section and Lite Selection Door Height and Section Selection Door Width No. Panels Max. No.Windows Door Height No. Sections Up to 9'2" 2 2 Up thru 8'1" 4 9'3" to 12'2" 3 3 8'2" thru 10'1" 5 12'3" to 16'2" 4 4 10'2" thru 12'1" 6 16'2" & up Call Factory drawings for front mount torsion clearances. **Note: 8” sideroom required, one sidefor doors having chain hoist. 24" side room required, one side for doors having jackshaft operators. ***Note: Clear headroom is based on cable size so please contact factory for specific headroom for your door. StandardLiftHighLiftRoofPitchVerticalLiftLowHeadroomLowHeadroomTrackSelectionGuide (break-awayisstandard,straightinclineisavailable) (standard or hig...