Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
Product Features ................................................... 2 Component Identification..................................... 3 Identify Your Door Type ........................................ 3 Important Installation Instructions........................ 4 Assembly Instructions........................................... 5 Installing the Opener ............................................. 7 Mounting the Front Bracket ................................ 7 Mounting the Power Head................................... 7 Power Requirements/Permanent Wiring ............ 8 Control and Auxiliary Equipment.......................... 9 Installation of the Super Station ......................... 9 Standard Wall Push Button Installation ............. 9 Installation of Safe Finish Photosystem........... 10 Important Safety Instructions ........................... 11 Installation Checklist ........................................... 12 TABLE OF CONTENTS WARNING Indicates a MECHANICAL hazard of INJURY OR DEATH. Gives instructions to avoid the hazard. Operation and Adjustment Instructions..............12 Basic Operating Parameters..............................12 Door Arm Connection ........................................13 Programming The Radio System ......................14 FCC and IC Radio Operation Statement ..........15 Testing the Limit Settings..................................16 Testing the Sensitivity .......................................16 Testing the Reversing System ..........................16 Testing the Safe Finish Photosystem ...............17 Operating the Super Station..............................17 Wiring Diagram.....................................................18 Using the Manual Release Mechanism ...............19 Troubleshooting Guide ........................................19 Warranty Statement..............................................20 CAUTION READ THESE STATEMENTS CAREFULLY AND FOLLOW THE INSTRUCTIONS CLOSELY The Warning and Caution boxes throughout this manual are there to protect you and your equipment. Pay close attention to these boxes as you follow the manual. WARNING CAUTION Indicates an ELECTRICAL hazard of DAMAGE to the door, door opener, or equipment. Gives instructions to avoid the hazard. Indicates an ELECTRICAL hazard of INJURY OR DEATH. Gives instructions to avoid the hazard. Indicates a MECHANICAL hazard of DAMAGE to the door, door opener, or equipment. Gives instructions to avoid the hazard. By PRODUCT FEATURES The purpose of this booklet is to provide assembly, installation and operation information concerning theherein described Residential Garage Door Opener and related Accessory Products. NOTICE IT IS IMPORTANT THAT THIS INSTRUCTION MANUAL BE READ AND UNDERSTOOD COMPLETELY BEFORE INSTALLATION OR OPERATION IS ATTEMPTED. NOTICE THE IMPORTANT SAFEGUARDS AND INSTRUCTIONS IN THIS MANUAL CANNOT COVER ALL POSSIBLE CONDITIONS AND SITUATIONS WHICH MAY OCCUR DURING ITS USE. IT MUST BE UNDERSTOOD THAT COMMON SENSE AND CAUTION MUST BE EXERCISED BY THE PERSON(S) INSTALLING, MAINTAINING AND OPERATING THE EQUIPMENT DESCRIBED HEREIN. DO NOT USE THIS EQUIPMENT FOR ANY OTHER THAN ITS INTENDED PURPOSE - OPERATING OVERHEAD GARAGE DOORS. STANDARD FEATURES: Digital Radio Controls: This opener is equipped with a pre-programmed transmitter to one of over nineteen thousand private codes. The transmitter can be reprogrammed without difficulty using the external operation buttons. The power head is easilyprogrammed to accept the transmitter signal. (Page 14) Safe Finish™ Photosystem: An invisible infrared beam of light guards the door opening and reverses adownward moving door if the beam is broken by a stationary or moving object. The motor control circuitry constantly monitors the Safe Finish™ Photosystem for proper operation. Super Station (Deluxe Wall Push Button): A feature-packed accessory unit, the Super Station allowsaccess to all of the opener's functions. Independent Open, Close, and Stop buttons permits full control ofthe door’s operation. The opener's built-in light can beturned on or off independent of door operation. ALearn Enable button allows programming of the radiocontrols at floor level. A Security Switch allows theopener to be deactivated for extended periods of time. A Security Disable switch is provided if the garagedoor is the only entryway into the garage. Lighted Push Buttons enhance nighttime use. (Page 17) TOOLS REQUIRED FOR INSTALLATION HACKSAW SOCKET WRENCH 3/8” SOCKET HAMMER STEPLADDER SCREW DRIVER TAPE WOOD BLOCK MEASURE Manual Release: A pull cord allows separation ofthe drive mechanism and manual operation of thedoor when desired, as in the event of a power failure. The trolley release can be set to lock out automaticreconnection if desired. (Page19) Automatic Reconnection: Once power is restored, or normal operation of the door is again desired, the trolley release can be set so initiating operation in thenormal manner (Push Button, Radio Control, etc.) will e...