Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Автомагнитолы - SLCT810 (1.77 mb)
Автомагнитолы - SLCT810 (302.06 kb)
Фрагмент инструкции
Playing WMA/MP3
This unit can play WMA/MP3 files you have recorded to discs.
MP3: MPEG Layer-3 audio decoding technology licensed from
Fraunhofer IIS and Thomson multimedia.
SL-CT810
HOLD
This function causes the unit to ignore accidental button presses.
Set to HOLD so the unit doesn’t power on accidentally or play is
interrupted.
Dear Customer
≥The unit and remote control each have independent HOLD switches.
Thank you for purchasing
Portable CD Player
Note on CD-R and CD-RW
this product.
This unit can play CD-R and CD-RW recorded with CD-DA or
Before connecting,
Operating Instructions
WMA/MP3. Use an audio recording disc for CD-DA and finalize§ it
operating or adjusting
when you finish recording. The unit may not be able to play some
this product, please read
discs due to the condition of the recording.
these instructions
§ A process performed after recording that enables CD-R/CD-RW
completely. Please keep
players to play audio CD-R and CD-RW.
this manual for future
reference.
Resume function
Play begins from the last point stopped. Replacing the disc cancels
the function.
Auto off function
If the unit is left in stop mode for approximately 10 minutes, the unit
turns itself off automatically.
Key illumination
When HOLD is released, the unit’s buttons light in different ways to
indicate the operation.
≥To turn the illumination off, set to HOLD. (Only [1/;, CHG] lights while charging.)
≥The color shows the track type playing: green for CD-DA, red for WMA, and orange for
MP3.
The display light
Note:
The light in the remote control’s display comes on for about
“EB” on the packaging indicates
5 seconds when you press a button, unless the hold function is on.
the United Kingdom.
Magnetic adaptor
EB
EG
GN GK GH GC
p
This adaptor allows you to quickly and easily connect and disconnect
the AC adaptor. This also allows for smoother recharging.
Matsushita Electric Industrial Co., Ltd.
Web Site: http://www.panasonic.co.jp/global/
RQT7203-1B
F1103TT1123
Troubleshooting guide
Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, consult your dealer for instructions.
No play.
≥The HOLD function is on. Release HOLD. (➪ page 5)
Cannot specify the AB
≥You may not be able to specify segment A or B at the end of
≥The batteries may have run empty (➪ page 4).
segment.
disc.
(If play is extremely short even after fully recharging the
Cannot change the
≥The mode cannot be changed when selecting a track while
batteries, the batteries may have exceeded their life.
Digital Re-master mode.
stopped.
Rechargeable batteries can be recharged approximately 300 times.)
≥The disc isn’t correctly set.
Digital Re-master does
≥Depending on the type of WMA/MP3 disc recording, the effect
≥The disc is scratched or dirty. (Tracks skipped.)
not work.
may not appear.
≥There is moisture on the lens. Wait for about an hour and
Cannot skip albums.
then try again.
≥You cannot skip between the first and last albums during play.
≥The lens is dirty: clean it with a blower (recommended
Cannot hear the remote
≥The operation tone may be off (➪ page 5).
product: SZZP1038C).If the lens gets marked with
control’s operation tone.
fingerprints, gently wipe them off with a cotton swab.
The remote control does
≥Use only the included remote control to operate this unit.
≥Make sure the magnetic adaptor is connected properly.
not work properly.
≥The unit may not read WMA/MP3 correctly if it is shaken
while it is reading the files.
The unit beeps rapidly.
≥The operation is not possible. You cannot adjust the volume,
≥Play of a multi-session disc may not be possible if there is a
sound quality or anti-skip system if you have connected the
blank data segment between sessions.
unit to other equipment. Adjust them on the other equipment.
≥If there is large JPEG data etc. within a WMA/MP3 file, sound
may become muted and play may not be possible.
Cannot recharge.
≥You aren’t using the special rechargeable batteries.
≥If you try playing a CD that contains CD-ROM format data and
≥You must insert two batteries before you can recharge them.
normal audio data (CD-DA), output from one of the above may
≥The unit must be off before you can recharge.
become silent, and play may not be possible.
The AC adaptor
≥This is normal.
≥You cannot play a WMA disc if the copy protection setting was
becomes warm during
on when you made the disc.
recharging.
≥Some HighMAT discs may not be playable on this unit.
The batteries are taking
≥The batteries may take a maximum of 6 hours to recharge
No sound or there is a
≥Ensure the plugs are inserted firmly.
a long time to recharge.
under some conditions.
lot of noise.
≥Wipe the plugs clean with a clean cloth.
≥Noise may occur when playing WMA/MP3 if recording quality
Play time is short after
≥This may occur after the first time you recharge the batteries
is poor.
recharging.
or haven’t used them for a long time. Play time should be
≥The elapsed playing time disappears and sound is interrupted
restored after a few recharges.
if bumps continue repeatedly.
≥The batteries can go flat if you leave the AC adaptor
≥There is no sound from the earphones if you have connected
connected after recharging is complete.
the unit to other equipment.
The buttons don’t light.
≥When using the magnetic adaptor, make sure it is clean from
Play doesn’t resume
≥This doesn’t work if you change discs.
dust and grim, connected properly and the unit is positioned
from the last point
≥This doesn’t work during random play.
horizontally.
stopped.
≥Re-selecting the playlist cancels the resume function.
≥The buttons don’t light if HOLD is on.
≥It may not work correctly under some conditions.
The battery indicator fails
≥The indicator does not appear when the AC adaptor is connected.
Play doesn’t start from
≥Random play modes may be on (➪ page 5).
to appear or is incorrect.
≥The indicator does not appear correctly under some conditions.
the first track.
≥Play resumes from the last point stopped(➪ above).
The unit stops working.
≥Disconnect then reconnect all power sources (batteries and
Cannot search through tracks.
≥You cannot search through WMA/MP3 files.
AC adaptor).
1
...