Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
IMPORTANT SAFETY INSTRUCTIONS
Read these operating instructions carefully before using the unit. Follow
the safety instructions on the unit and the safety precautions listed below.
Care of the CD lens
Keep these operating instructions handy for future reference.
Open the lid and clean the lens.
Use a cotton swab to gently wipe off any finger-prints.
Recommended product:
Safety
Lens cleaner kit (SZZP1038C)
1. Power source—Connect the unit to a power source of the type de-
scribed in these instructions or as marked on the unit.
Use of batteries
2. Polarization—The unit is equipped with a polarized power plug where
one blade is wider than the other. This safety feature ensures that the
≥Align the poles (- and +) properly when inserting the batteries.
plug fits into your household AC outlet only one way. If the plug doesn’t
≥Do not heat or disassemble batteries. Do not allow them to contact flame
fit one way, try reversing it. If the plug still doesn’t fit, contact an electri-
or water.
cian to replace the obsolete outlet. Do not attempt to defeat the safety
≥Remove the batteries if the unit is not to be used for a long time.
purpose of the plug.
≥Do not use the batteries if the covering has been peeled off.
3. Power cord protection—Route the AC power supply cord so that it will
Mishandling of batteries can cause electrolyte leakage which can damage
not be walked on or pinched by items placed on or against it. Never
items the fluid contacts and may cause a fire.
take hold of the plug or cord with wet hands. Always grasp the plug
If electrolyte leaks from the batteries, consult your dealer.
body firmly when connecting and disconnecting it.
Wash thoroughly with water if electrolyte comes in contact with any part of
4. Overloading—When connecting the AC power supply cord, be careful
your body.
not to overload the household AC outlet, extension cord, or outlet from
any other device as this can result in fire or electric shock.
5. Nonuse periods—Turn the unit off when it is not in use. Unplug the
Listening caution
unit from the household AC outlet if it is not to be used for a long time.
N I C I N D
Unplug the unit during lightning storms.
O
U
R
S
T
TR
C
E
I
E
6. Attachments and accessories—Use only the attachments and acces-
L
S
E•
•
A
EST. 1924
S
N
S
sories recommended in these operating instructions.
O C I A T I O
Selecting fine audio equipment such as the unit you’ve just purchased is
Installation
only the start of your musical enjoyment. Now it’s time to consider how
you can maximize the fun and excitement your equipment offers. This
∫ Placement
manufacturer and the Electronic Industries Association’s Consumer
1. Ventilation—Situate the unit so that it receives proper ventilation. Do
Electronics Group want you to get the most out of your equipment by play-
not install in a confined space such as a bookcase or cabinet. Allow at
ing it at a safe level. One that lets the sound come through loud and clear
least 10 cm (4 inches) clearance from the rear of the unit. To prevent
without annoying blaring or distortion—and, most importantly, without af-
the risk of electric shock or fire due to overheating ensure curtains and
fecting your sensitive hearing.
other materials do not obstruct the unit’s ventilation.
2. Foreign material—Ensure objects and liquids do not get into the unit.
We recommend you to avoid prolonged exposure to excessive noise.
Avoid exposing the unit to excessive smoke, dust, mechanical vibration,
and shock.
Sound can be deceiving. Over time your hearing “comfort level” adapts to
3. Magnetism—Situate the unit away from equipment and devices that
higher volumes of sound. So what sounds “normal” can actually be loud
generate strong magnetic fields.
and harmful to your hearing.
4. Stacking—Do not place heavy objects on top of this unit.
Guard against this by setting your equipment at a safe level BEFORE your
5. Surface—Place the unit on a flat, level surface.
hearing adapts.
6. Carts and stands—Use the unit only with carts and
To establish a safe level:
stands recommended by the manufacturer. Move carts
≥Start your volume control at a low setting.
with care. Sudden stops, excessive force, and uneven
≥Slowly increase the sound until you can hear it comfortably and clearly,
surfaces can cause carts to overturn.
and without distortion.
7. Wall and ceiling mounting—Do not mount the unit on walls or ceilings
unless specified in the instructions.
Once you have established a comfortable sound level:
≥Set the dial and leave it there.
∫ Environment
1. Water and moisture—Do not use the unit near water, such as near a
Taking a minute to do this now will help to prevent hearing damage or loss
bathtub or swimming pool. Avoid damp basements.
in the future. After all, we want you listening for a lifetime.
2. Heat—Situate the unit away from heat sources, such as radiators.
Do not situate where temperatures fall below 5eC (41eF) or rise above
35eC (95eF).
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
Maintenance
CAUTION:
Unplug the unit from the household AC outlet before cleaning.
This equipment has been tested and found to comply with the limits for
Clean with a damp cloth.
a Class B digital device, pursuant to Part 15 of the FCC Rules.
Do not use abrasive pads, scouring powders, or solvents.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment gener-
Service
ates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful inter-
1. Damage requiring service—The unit should be serviced by qualified
ference to radio communications. However, there is no guarantee that
service personnel if:
interference will not occur in a particular installation. If this equipment
(a) The AC power supply cord or the plug has been damaged; or
does cause harmful interference to radio or television reception, which
(b) Objects or liquids have gotten into the unit; or
can be determined by turning the equipment off and on, the user is en-
(c) The unit has been exposed to rain; or
couraged to try to correct the interference by one or more of the follow-
(d) The unit does not operate normally or exhibits a marked change in
ing measures:
performance; or
≥Reorient or relocate the receiving antenna.
(e) The unit has been dropped or the cabinet damaged.
≥Increase the separation between the equipment and receiver.
2. Servicing—Do not attempt to service the unit beyond that described in
≥Connect the equipment into an outlet on a circuit different from that to
these operating instructions. Refer all other servicing to authorized ser-
which the receiver is connected.
vicing personnel.
≥Consult the dealer or an experienced radio/TV technician for help.
3. Replacement parts—When parts need replacing ensure the servicer
Any unauthorized changes or modifications to this equipment would
uses parts specified by the manufacturer or parts that have the same
void the user’s authority to operate this device.
characteristics as the original parts. Unauthorized substitutes may result
This device complies with Part 15 of the FCC Rules. Operation is sub-
in fire, electric shock, or other hazards.
ject to the following two conditions: (1) This device may not cause
4. Safety check—After repairs or service, ask the servicer to perform
harmful interference, and (2) this device must accept any interference
safety checks to confirm that the unit is in proper working condition.
received, including interference that may cause undesired operation.
7
...