Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
So you do not have to select "VOL” to adjust the volume level. To turn on/off the loudness function The human ear is less sensitive to low and high frequencies at low volumes. The loudness function can boost these frequencies to produce well-balanced sound at low volume level. Each time you press LOUD, the loudness function turns on and off alternately. 12 Using the Sound Control Memory J You can select and store a preset sound adjustment suitable to each playback source. (Advanced SCM) Selecting and storing the sound modes Once you select a sound mode, it is stored in memory, and will be recalled every time you select the same source. A sound mode can be stored for each of the following sources — FM1, FM2, FM3, AM, and TAPE. • If you do not want to store the sound mode separately for each playback source, but want to use the same sound mode for all the sources, see “Canceling Advanced SCM” on page 18. 1 Select the sound mode you want. Each time you press the button, the sound mode changes as follows: pSCM OFF —► BEAT —► POP —»-SOFT -j • If the “Link” indicator is lit on the display (with “SCM LINK” set to “LINK ON”—see page 18), the selected sound mode can be stored in memory for the current source, and the effect applies to the current source. • If the “Link” indicator is NOT lit on the display (with “SCM LINK” set to “LINK OFF”, the selected sound mode effect applies to any source. Indication For: Range Bass Treble Loudness SCM OFF (Flat sound) 00 00 On BEAT Rock or disco music +02 00 On POP Light music +04 +01 Off SOFT Quiet background music +01 -03 Off 13 ENGLISH ENGLISH _ Recalling the sound modes Source buttons Cj№0 Om TAPEI/ Select the source while the "Link” indicator is lit on the display. The “Link” indicator starts flashing, and the sound mode stored in memory for the selected source is recalled. Equalization pattern of the selected sound mode appears. BH.5 Sound mode indicator Loud (loudness) indicator Notes: • You can adjust each sound mode to your preference, and store it in memory. Ifyou want to adjust and store your original sound mode, see "Storing your own sound adjustments” on page 15. • To adjust the bass and treble reinforcement levels or to turn on/off the loudness function temporarily, see page 12. (Your adjustments will be canceled if another source is selected.) 14 Storing your own sound adjustments You can adjust the sound modes (BEAT, POP, SOFT,: see page 13) to your preference and store your own adjustments in memory. 1 Call up the sound mode you want to adjust. See page 13 for details. To adjust the bass or treble sound level Select "BAS" or "TRE". To turn on or off hte loudness function See page 12 for details. Adjust the bass or treble level. See page 12 for details. Press and hold SCM (Sound Control Memory) until the sound mode you have selected flashes on the display. Your setting is stored in memory. 5 Repeat the same procedure to store other settings. To reset to the factory settings Repeat the same procedure and reassign the preset values listed in the table on page 13. 15 ENGLISH ENGLISH _ OTHER MAIN FUNCTIONS Setting the clock Press and hold SEL for more than 2 seconds to call up the general settings mode. 2 1 2 Set the hour. / f\ (=Cssm //ifECx 1 Select “CLOCK H” if not shown on VHW A / the display. ' / 2 Adjust the hour. 3 1 2 Set the minute. 1 Select “CLOCK M”. 2 Adjust the minute. 4 Finish the setting. To check the current clock time (changing the display mode) Press DISP repeatedly. Each time you press the button, the display mode changes as follows: If the unit is not in use when you press DISP, the power turns on, the clock time is shown for 5 seconds, then the power turns off. 7 16 'àEEF: Changing the general settings You can change the settings of the items listed on the next page. Basic Procedure Press and hold SEL for more than 2 seconds to call up the general settings mode. 2 Select the item you want to adjust (see page 18.) Select or adjust the item selected above. 4 Finish the setting. 17 ENGLISH ENGLISH 'WHOM} 1 / Awp. fKELL. I v« A Select. V ' 3 © Set. Factory- preset settings See page CLOCK H Hour adjustment Back Advance 0:00 16 CLOCK M Minute adjustment Back Advance SCM LINK Sound control memory linkage LINK OFF LINK ON LINK ON below LEVEL Level display AUDIO 1 «-► AUDIO 2 *-► OFF ^ AUDIO 2 19 TEL Audio mute for cellular phone system OFF «-► MUTING 1 ^MUTING 2«^ OFF 19 B.SKIP Blank skip OFF ON OFF 11 • Press SEL (select) when the setting is complete. Canceling Advanced SCM You can cancel the Advanced SCM (Sound Control Memory), and unlink the sound modes and the playback sources. When shipped from the factory, a different sound mode can be stored in memory for each source so that you can change the sound modes simply by changing the sources. • LINK ON: Advanced SCM (different sound modes for different sources) • LINK OFF: Conventional S...