Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Storing and recalling broadcast frequencies If you press any of the PRESET TUNING buttons you can easily store up to six broadcast frequencies for later recall with the touch of a button. When you find a frequency that you want to store in memory press a PRESET TUNING button and hold until the preset number stops flashing. The number you have pressed will flash in the PRESET NUMBER indicator and then remain lit. The selected radio station frequency has been stored in memory. The next time you press the same PRESET TUNING button the radio station frequency is recalled from memory. Notes • Up to 18 FM stations, 6 for each of the three FM bands, and 6 MW/LW stations can be stored in memory. • You can also use 5 and . to recall radio station frequencies assigned to PRESET TUNING buttons. 12 En Section Tuner Tuning in strong signals Storing the strongest broadcast Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception. 1 Press FUNCTION to select LOCAL. Press FUNCTION until Local appears in the display. 2 Press 5 to turn local seek tuning on. Local seek sensitivity (e.g., Local 2) appears in the display. 3 Press 2 or 3 to set the sensitivity. There are four levels of sensitivity for FM and two levels for MW/LW: FM: Local 1—Local 2—Local 3—Local 4 MW/LW: Local 1—Local 2 The Local 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations. 4 When you want to return to normal seek tuning, press . to turn local seek tuning off. Local :OFF appears in the display. frequencies BSM (best stations memory) lets you automatically store the six strongest broadcast frequencies under PRESET TUNING buttons 1–6 and once stored there you can tune in to those frequencies with the touch of a button. 1 Press FUNCTION to select BSM. Press FUNCTION until BSM appears in the display. 2 Press 5 to turn BSM on. BSM begins to flash. While BSM is flashing the six strongest broadcast frequencies will be stored under PRESET TUNING buttons in order of their signal strength. When finished, BSM stops flashing. • To cancel the storage process, press .. Note • Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using PRESET TUNING. English En 13 Section RDS Introduction of RDS operation 1 3 2 RDS (radio data system) is a system for providing information along with FM broadcasts. This inaudible information provides such features as program service name, program type, traffic announcement standby and automatic tuning, intended to aid radio listeners in finding and tuning in to a desired station. 1 AF indicator Shows when AF (alternative frequencies search) function is on. 2 TP ( ) indicator Shows when a TP station is tuned in. 3 Program service name Shows the type of broadcast program. • If the set NEWS is received, the icon lights. Press FUNCTION to display the function names. Press FUNCTION repeatedly to switch between the following functions: BSM (best stations memory)—REG (regional)— LOCAL (local seek tuning)—PTY (program type selection)—TA (traffic announcement standby)—AF (alternative frequencies search)— NEWS (news program interruption) • To return to the frequency display, press BAND/ESC. • If MW/LW band is selected, you can only select BSM or LOCAL. Notes • If you do not operate the function within about 30 seconds, the display is automatically returned to the frequency display. • RDS service may not be provided by all stations. • RDS functions like AF and TA are only active when your radio is tuned to a RDS station. Switching the RDS display When you tune in a RDS station its program service name is displayed. If you want to know the frequency you can. Press DISPLAY. Press DISPLAY repeatedly to switch between the following settings: Program service name (A) —PTY information and Frequency—Program service name (B) PTY (program type ID code) information is listed on page 19. • PTY information and the frequency of the current station appears on the display for eight seconds. • If a PTY code of zero is received from a station, Display is blank. This indicates that the station has not defined its program contents. • If the signal is too weak for this product to pick up the PTY code, the PTY Information Display is blank. 14 En Section RDS Selecting alternative frequencies Using PI Seek If you are listening to a broadcast and the reception becomes weak or there are other problems, the unit will automatically search for a different station in the same network which is broadcasting a stronger signal. • AF is on as a default. 1 Press FUNCTION to select AF. Press FUNCTION until AF appears in the display. 2 Press 5 to turn AF on. Press 5 and AF :ON is displayed. 3 Press . to turn AF off. Press . and AF :OFF is displayed. Notes • Only RDS stations are tuned in during seek tuning or BSM when AF is on. • When you recall a preset station, the tuner may update the preset station with a new frequency...