Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
1 Press M.C. to turn the BT AUDIO source on or off. TITLE (multi-language) This unit can display the text information of a compressed audio file even if they are embedded in a Western European or Russian language. ! If the embedded language and the selected lan guage setting are not the same, text information may not display properly. ! Some characters may not be displayed properly. 1 Press M.C. to select the desired setting. EUR (European)—RUS (Russian) PW SAVE (power saving) Switching this function on enables you to reduce the consumption of battery power. ! Turning on the source is the only operation al lowed when this function is on. 1 Press M.C. to turn the power save on or off. BT CLEAR (resetting the Bluetooth wireless technology module) Bluetooth device data can be deleted. To protect personal information, we recommend deleting this data before transferring the unit to other persons. The following settings will be deleted. ! phone book entries on the Bluetooth telephone ! preset numbers on the Bluetooth telephone ! registration assignment of the Bluetooth telephone ! call history of the Bluetooth telephone ! information of the connected Bluetooth telephone ! PIN code of the Bluetooth device 1 Press M.C. to show the confirmation display. YES is displayed. Clearing memory is now on standby. If you do not want to reset phone memory, turn M.C. to display CANCEL and press to select. 2 Press M.C. to clear the memory. CLEARED is displayed and the settings are deleted. ! While this function is in use, do not turn off the engine. BT VERSION (Bluetooth version display) You can display the system versions of this unit and of Bluetooth module. 1 Press M.C. to display the information. S/W UPDATE (updating the software) This function is used to update this unit with the latest software. For information on the software and updating, refer to our website. ! Never turn the unit off while the software is being updated. 1 Press M.C. to display the data transfer mode. Follow the on-screen instructions to finish updating the software. Switching the dimmer setting You can adjust the brightness of illumination. % Press and hold . Using an AUX source 1 Insert the stereo mini plug into the AUX input jack. 2 Press SRC/OFF to select AUX as the source. Note AUX cannot be selected unless the auxiliary setting is turned on. For more details, refer to AUX (auxiliary input) on the previous page. Operating this unit 19 En Appendix Additional information Troubleshooting Symptom Cause Action The sound from the Bluetooth The display illu-Demo mode is Turn off the demo audio source is mination turns on. display setting. not played on and off at back. random. The display automatically returns to the You did not perform any operation within about Per form operation again. ordinar y display. 30 seconds. The repeat play range changes unexpectedly. Depending on the repeat play range, the selected range may change when another folder or Select the repeat play range again. track is being selected or during fast forwarding/ reversing. Symptom Cause Action There is a call in The sound will be progress on a played back when Bluetooth con-the call is terminected cellular nated. phone. A Bluetooth-con-Do not operate the nected cellular cellular phone at phone is cur-this time. rently being operated. A call was made with a Bluetoothconnected cellular phone and then immediately terminated. As a result, communication between this unit and the cellular phone was not terminated properly. Reconnect the Bluetooth connection between this unit and the cellular phone. A subfolder is Subfolders can-Select another re- not played not be played peat play range. back. when FLD (folder repeat) is selected. Error messages NO XXXX ap-There is no em-Switch the display pears when a bedded text infor-or play another When you contact your dealer or your nearest display is chan-mation. track/file. Pioneer Service Center, be sure to note the ged (NO TITLE, error message. for example). The unit is mal-You are using a Move electrical de Built-in CD Player functioning. device, such as a vices that may be There is inter-cellular phone, causing the interference. that transmits ference away from ERROR-07, 11, The disc is dirty. Clean the disc. Message Cause Action electric waves the unit. 12, 17, 30 The disc is Replace the disc. scratched. near the unit. ERROR-07, 10, There is an elec- Turn the ignition 11, 12, 15, 17, trical or mechan- switch OFF and 30, A0 ical error. back ON, or switch to a different source, then back to the CD player. ERROR-15 The inserted disc is blank. Replace the disc. ERROR-23 Unsupported CD format. Replace the disc. 20 En Appendix Additional information MessageCauseActionMessageCauseAction FRMT READ Sometimes there Wait until the mes-PROTECT All the files in the Transfer audio files is a delay be-sage disappears USB storage de-not embedded with tween the start of and you hear vice are em-Windows Media playback and sound. bedded with DRM 9/10 to the wh...