Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
. # To return to the normal display, press BAND. Other Functions Adjusting initial settings Using the initial settings, you can customize various system settings to achieve optimal performance from this unit. 1 Press SOURCE and hold until the unit turns off. 2 Press SOURCE and hold until function name appears in the display. 3 Press FUNCTION to select one of the initial settings. Press FUNCTION repeatedly to switch between the following settings: FM (FM tuning step)—A-PI (auto PI Seek)— AUX (auxiliary input)—TITLE (multi language) —SAVE (power save) Use the following instructions to operate each particular setting. # AUX (auxiliary input) setting can be used with DEH-3900MP. # To cancel initial settings, press BAND. # You can also cancel initial settings by holding down SOURCE until the unit turns off. Setting the FM tuning step Normally the FM tuning step employed by seek tuning is 50 kHz. When AF or TA is on, the tuning step automatically changes to 100 kHz. It may be preferable to set the tuning step to 50 kHz when AF is on. ! The tuning step remains at 50 kHz during manual tuning. 1 Press FUNCTION to select FM. English 13 En Section 02 Operating this unit 2 Press c or d to select the FM tuning step. Press c to select 50 (50 kHz). Press d to select 100 (100 kHz). Switching Auto PI Seek The unit can automatically search for a different station with the same programming, even during preset recall. 1 Press FUNCTION to select A-PI. 2 Press a or b to turn the Auto PI seek on or off. Switching the auxiliary setting This function can be used with DEH-3900MP. It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting when using auxiliary equipment connected to this unit. 1 Press FUNCTION to select AUX. 2 Press a or b to turn the auxiliary setting on or off. Multi language display setting Text information such as title name, artist name or comment can be recorded on a WMA/MP3/WAV disc. This unit can display them even if they are embedded in either European language or Russian language. ! ! If embedded language and selected language setting are not consistent with each other, text information may not be displayed properly. Some characters may not be displayed properly. 1 Press FUNCTION to select TITLE. 2 Press c or d to select the language. EUR (European language)—RUS (Russian language) Saving the battery consumption Switching this function on enables you to save the consumption of battery power. ! Operations other than turning on the source are not allowed when this function is on. Important If the battery in your vehicle is disconnected the Power Save mode is canceled. Turn on Power Save again once the battery has been reconnected. If the ignition switch in your vehicle doesn’t have an ACC (accessory) position, it is possible depending on the connection method that when Power Save is off, the unit will draw power from the battery. 1 Press FUNCTION to select SAVE. 2 Press a or b to turn the power save on or off. Sound muting Sound from this unit is muted automatically in the following cases: ! When a call is made or received using a cellular telephone connected to this unit. ! When the voice guidance is output from a Pioneer navigation unit connected to this unit. The sound is turned off, MUTE is displayed and no audio adjustments, except volume control, are possible. Operation returns to normal when the phone connection or the voice guidance is ended. 14 En Appendix Additional Information Troubleshooting Common English SymptomCauseAction(See) Power doesn’t turn on. Leads and connectors are incor-Confirm once more that all connections are The unit doesn’t operate. rectly connected. correct. The unit doesn’t operate properly. Display indication is improper. Black lead (chassis ground) is not correctly connected but the other leads are connected. Remove the negative terminal of the vehicle’s battery and leave at least one minute. Error messages When you contact your dealer or your nearest Pioneer Service Center, be sure to record the error message. MessageCauseAction ERROR-11, 12, Dirty disc Clean disc. 17, 30 ERROR-11, 12, Scratched disc Replace disc. 17, 30 ERROR-10, 11, Electrical or me-Turn the ignition 12, 15, 17, 30, chanical ON and OFF, or A0 switch to a differ ent source, then back to the CD player. ERROR-15 The inserted disc Replace disc. does not contain any data ERROR-22, 23 The CD format Replace disc. cannot be played back NO AUDIO The inserted disc Replace disc. does not contain any files that can be played back PROTECT All the files on Replace disc. the inserted disc are secured by DRM SKIPPED The inserted disc Replace disc. contains WMA files that are protected by DRM Handling guideline of discs and player ! Use only discs featuring either of following two logos. ! Use only conventional, fully circular discs. Do not use shaped discs. ! Use 12-cm or 8-cm CD. Do not use an adapter when playing 8-cm CDs. ! Do not insert anything other than a CD into the CD loading slot. ! D...
Эта инструкция также подходит к моделям:Автомагнитолы - DEH-2900MPB (807.9 kb)
Автомагнитолы - DEH-2920MP (807.9 kb)
Автомагнитолы - DEH-3900MP (807.9 kb)