Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
FM STEP (FM tuning step)—AUTO-PI (auto PI seek)—AUX (auxiliary input)—TITLE (multi language)—PW SAVE (power saving) # To return to the previous display, press DISP/BACK/SCRL. # To return to the main menu, press and hold DISP/BACK/SCRL. # To cancel initial settings, press BAND/ESC. Setting the FM tuning step Normally the FM tuning step employed by seek tuning is 50 kHz. When AF or TA is on, the tuning step automatically changes to 100 kHz. It may be preferable to set the tuning step to 50 kHz when AF is on. English 17 En Section 02 Operating this unit ! The tuning step remains at 50 kHz during manual tuning. 1 Use MULTI-CONTROL to select FM STEP in the initial setting menu. Refer to Adjusting initial settings on the previous page. 2 Press MULTI-CONTROL to display the setting mode. 3 Turn MULTI-CONTROL to select the FM tuning step. 50 KHZ (50 kHz)—100 KHZ (100 kHz) 4 Press MULTI-CONTROL to determine the selection. # Even if the menu has been cancelled before determination, operation is settled. Switching Auto PI Seek The unit can automatically search for a different station with the same programming, even during preset recall. 1 Use MULTI-CONTROL to select AUTO-PI in the initial setting menu. Refer to Adjusting initial settings on the previous page. 2 Press MULTI-CONTROL to turn Auto PI seek on. # To turn Auto PI seek off, press MULTI-CONTROL again. Switching the auxiliary setting It is possible to use auxiliary device with this unit. Activate the auxiliary setting when using auxiliary device connected to this unit. 1 Use MULTI-CONTROL to select AUX in the initial setting menu. Refer to Adjusting initial settings on the previous page. 2 Press MULTI-CONTROL to turn AUX on. # To turn AUX off, press MULTI-CONTROL again. Multi language display setting Text information such as title name, artist name or comment can be recorded on a compressed audio disc. This unit can display them even if they are embedded in a European language or Russian. ! ! If the embedded language and the selected language setting are not the same, text information may not be displayed properly. Some characters may not be displayed properly. 1 Use MULTI-CONTROL to select TITLE SETTING in the initial setting menu. Refer to Adjusting initial settings on the previous page. 2 Press MULTI-CONTROL to display the setting mode. 3 Turn MULTI-CONTROL to select the desired setting. EUROPEAN (European language)—RUSSIAN (Russian language) 4 Press MULTI-CONTROL to determine the selection. # Even if the menu has been cancelled before determination, operation is settled. Saving the battery consumption Switching this function on enables you to save the consumption of battery power. ! Operations other than turning on the source are not allowed when this function is on. 18 En Section Operating this unit 02 Important If the battery in your vehicle is disconnected, the Power Save mode is canceled. Turn on Power Save again once the battery has been reconnected. If the ignition switch in your vehicle doesn’t have an ACC (accessory) position, it is possible depending on the connection method that when Power Save is off, the unit will draw power from the battery. 1 Use MULTI-CONTROL to select PW SAVE in the initial setting menu. Refer to Adjusting initial settings on page 17. 2 Press MULTI-CONTROL to turn the power save on. # To turn the power save off, press MULTI-CONTROL again. Other Functions Using the AUX source You can connect an auxiliary device to this unit using a stereo mini plug cable. % Insert the stereo mini plug into the input jack on this unit. Selecting AUX as the source % Press SRC/OFF to select AUX as the source. # If the auxiliary setting is not turned on, AUX cannot be selected. For more details, see Switching the auxiliary setting on the previous page. Sound muting Sound from this unit is muted automatically in the following cases: ! When a call is made or received using a cellular telephone connected to this unit. ! When the voice guidance is output from a Pioneer navigation unit connected to this unit. The sound is turned off, MUTE is displayed and no audio adjustments, except volume control, are possible. Operation returns to normal when the phone connection or the voice guidance is ended. English 19 En Appendix Additional Information Error messages When you contact your dealer or your nearest Pioneer Service Center, be sure to have the error message recorded. Built-in CD Player MessageCauseAction ERROR-11, 12, Dirty disc Clean disc. 17, 30 Scratched disc Replace disc. ERROR-10, 11, Electrical or me-Turn the ignition 12, 15, 17, 30, chanical switch OFF and A0 back ON, or switch to a different source, then back to the CD player. ERROR-15 The inserted disc Replace disc. does not contain any data ERROR-22, 23 The CD format Replace disc. cannot be played back NO AUDIO The inserted disc Replace disc. does not contain any files that can be played back SKIPPED The inserted disc Replace disc. contains WMA files that are protected by DRM PROTECT All the...
Эта инструкция также подходит к моделям:Автомагнитолы - DEH-2120UB (1.61 mb)