Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
PRS-A500) (sold separately) Power amplifier (e.g. PRS-A500) (sold separately) Power amplifier (e.g. PRS-A700) (sold separately) Audio processor (e.g. DEQ-P90) (sold separately) BlackBlackBlue IP-BUS cable Optical cable RCA cable (sold separately) RCA cable (sold separately) ! This illustration is a connection example. For details concerning connection with your audio processor, refer to audio processor’s owner ’s manual or contact your Pioneer dealer. 28 En Connecting the Pioneer IP-BUS devices This unit Display unit Optical cable Black Hide-away TV tuner (e.g. GEX-P5700TV) (sold separately) Multi-DVD player (e.g. XDV-P6) (sold separately) iPod adapter (e.g. CD-IB100II) (sold separately) Remote control sensor IP-BUS cable IP-BUS cable Blue Blue Black IP-BUS cable Blue Black Black Multi-CD Player (sold separately) Blue 25 pin cable Blue Display unit extension cable Connections En 29 Section 08 Connections Section 08 Connections Connecting the AUX devices AUX 4 unit (mini-plug-equipped unit) (sold separately) IP-BUS-RCA interconnector (CD-RB10/CD-RB20) (sold separately) AUX 5 unit (RCA-output-equipped unit) (sold separately) AUX 3 unit (optical-output-equipped unit) (sold separately) AUX 2 unit (RCA-output-equipped unit) (sold separately) AUX 1 unit (RCA-output-equipped unit) (sold separately) RCA cable (sold separately) TOSLINK digital cable (sold separately) COAXIAL (75 .) digital cable (sold separately) RCA cable (sold separately) mini plug (3.5 mm) cable (sold separately) Blue . ! If the device you want to connect does not have an RCA output, the supplied speaker- RCA conversion cable can be used. For details, refer to Using the speaker-RCA conversion cable on the next page. * Select COAX-input or TOSLINK-input depending on the connected device’s digital output. 30 En Section 08 Connections Selecting the input setting switch Depending on the AUX devices connected to this unit, select the input setting switch on the under side of this unit. * If you want to connect the device to this unit as AUX 1 or AUX 2, connect to AUX 1 or AUX 2 input. If IP-BUS-RCA interconnector is used, it is also possible to connect the device as AUX 5. AUX device (speaker-output-equipped unit) (sold separately) Speaker output 12 3 Connections White: Black: Black: Red: Left . Left . Right . Right . 4 1 Input level select switch (AUX1 Main) Input level of AUX1 can be selected between HIGH and LOW. If amplifier equipped unit is Speaker-RCA conversion cable (supplied) connected to AUX1, select this switch to HIGH. 2 Input level select switch (AUX2 AUX) Input level of AUX2 can be selected between HIGH and LOW. If amplifier equipped unit is connected to AUX2, select this switch to HIGH. 3 Digital input select switch (AUX3 Digital) Depending on the AUX3 unit, select COAX. (COAX digital cable) or OPT. (TOSLINK digital cable). 4 Mixing setting switch Sound from AUX1 Main and AUX2 AUX can be mixed by selecting this switch. Using the speaker-RCA conversion cable If the device you want to connect as an AUX unit does not have an RCA output, the supplied speaker-RCA conversion cable can be used. . To RCA input of this unit. 31 En Section Installation Important ! Check all connections and systems before final installation. ! Do not use unauthorized parts. Use of unauthorized parts may cause malfunctions. ! Consult your dealer if installation requires drilling of holes or other modifications to the vehicle. ! Install the unit where it will not get in the driver’s way and will not injure passengers if there is a sudden stop. ! When mounting this unit, make sure none of the leads are trapped between this unit and the surrounding metalwork or fittings. ! Do not mount this unit near heater outlets where it would be affected by heat, or near the doors where rainwater might splash onto it. ! Before drilling any mounting holes, always check behind where you want to drill the holes. Do not drill into the gas line, brake line, electrical wiring or other important parts. ! If this unit is installed in the passenger compartment, anchor it securely so it does not break free while the vehicle is moving, causing injury or an accident. ! If this unit is installed under the front seat, make sure it does not obstruct seat movement. Route all leads and cords carefully around the sliding mechanism so they do are not caught or pinched in the mechanism and cause a short-circuit. Installing the hide-away unit 1 Attach the mounting brackets to the hide-away unit. 13 2 1 Hide-away unit 2 Screw (4 mm . 8 mm) 3 Mounting bracket 2 Install the hide-away unit in the car. 2 14 3 1 Hide-away unit 2 Tapping screw (4 mm . 12 mm) 3 Drill a hole of 2 mm to 2.5 mm 4 Car mat or chassis 32 En Section 09 Installation Installing the display unit 2 Affix the hook and loop fastener (soft surface) to dashboard or console. Important ! Do not install the display unit where: — it may interfere with operation of the safety devices of the vehicle such as airbags. — it may interfere with operat...