Оценок - 2, средний балл: 4.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Kenwood always provides Amateur Radio products which surprise and excite serious hobbyists. This transceiver is no exception. As you learn how to use this transceiver, you will find that Kenwood is pursuing "user friendliness". For example, each time you change the Menu No. in Menu mode, you will see a text message on the display that lets you know what you are configuring. Though user friendly, this transceiver is technically sophisticated and some features may be new to you. Consider this manual to be a personal tutorial from the designers. Allow the manual to guide you through the learning process now, then act as a reference in the coming years. MODELS COVERED BY THIS MANUAL The models listed below are covered by this manual. TM-281A: 144 MHz FM Transceiver TM-481A: 430 MHz FM Transceiver The frequency indication examples in this instruction manual are provided for the TM-281A (VHF model). Therefore, the actual operation frequencies will not match when operating the TM-481A (UHF model). MARKET CODES Mn: General (Where "n" represents a variation number.) The market code is printed on the barcode label of the carton box. Refer to the product specifications {pages 69, 70} for information on the available operating frequencies within each model. For accessories supplied with the model, refer to page 1. FEATURES • Menu allows for easy control and selecting of various functions. • Up to 200 memory channels to program frequencies and other various data. (Up to 100 memory channels if Memory Channel Names are assigned to the channels.) • Continuous Tone Coded Squelch System (CTCSS) or Digital Code Squelch (DCS) rejects unwanted calls from other stations. • Equipped with an easy-to-read large LCD with alphanumeric display capability. • Free PC software (Memory Control Program) is available to program the frequency, signalling, and other settings of your transceiver. The MCP can be downloaded at: download.html NOTICES TO THE USER When condensation occurs inside the transceiver: Condensation may occur inside the transceiver when the room is warmed using a heater on a cold day or when the transceiver is quickly moved from a cold location to a warm location. When condensation occurs, the microcomputer and/or the transmit/receive circuits may become unstable, resulting in transceiver malfunction. If this happens, turn OFF the transceiver and wait for a while. When the condensed droplets disappear, the transceiver will function normally. PRECAUTIONS Please observe the following precautions to prevent fire, personal injury, and/or transceiver damage: Do not attempt to configure your transceiver while driving; it is simply too dangerous. Be aware of local laws pertaining to the use of headphones/headsets while driving on public roads. If in doubt, do not wear headphones while mobiling. Do not transmit with high output power for extended periods; the transceiver may overheat. Do not modify the transceiver unless instructed by this manual or other Kenwood documentation. Do not expose the transceiver to long periods of direct sunlight nor place it close to heating appliances. Do not place the transceiver in excessively dusty, humid or wet areas, nor on unstable surfaces. If an abnormal odor or smoke is detected coming from the transceiver, turn OFF the power immediately. Contact a Kenwood service station or your dealer. This transceiver is designed for a 13.8 V power source. Never use a 24 V battery to power the transceiver. CONTENTS SUPPLIED ACCESSORIES......................................1 WRITING CONVENTIONS FOLLOWED IN THIS MANUAL......................................................1 HAPTER^11 PREPARATION ~] MOBILE INSTALLATION..........................................2 DC POWER CABLE CONNECTION.........................3 Mobile Operation..................................................3 Fixed Station Operation........................................4 Replacing Fuses...................................................5 ANTENNA CONNECTION........................................5 ACCESSORY CONNECTIONS................................6 External Speaker..................................................6 Microphone...........................................................6 PC Connection.....................................................7 [?1 YOUR FIRST QSO 1 GETTING ACQUAINTED ~] FRONT PANEL.........................................................9 DISPLAY.................................................................10 REAR PANEL..........................................................12 MICROPHONE........................................................12 Mic Keypad Direct Entry....................................13 HAPTERg 4 1 OPERATING BASICS ~] SWITCHING THE POWER ON/OFF......................14 ADJUSTING THE VOLUME....................................14 ADJUSTING THE SQUELCH.................................1...
Эта инструкция также подходит к моделям:Автомагнитолы - TM-481A (1.48 mb)