Оценок - , средний балл: ( )

Инструкция по эксплуатации Kenwood, модель KDC-XBT8013UL

Производитель: Kenwood
Размер: 781.63 kb
Название файла:

Язык инструкции:

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

24 | KDC-XBT8013U/ KDC-XBT8013UL/ KDC-X7013U/ KDC-X7013UL Sound Setup Cabin selection You can compensate the delay of the sound arrival time by selecting your environment from the following car types; Not compensating. “OFF” Compact car “Compact” Full size car “Full Size Car” Station wagon “Wagon” Minivan “Minivan” Sport-utility vehicle “SUV” Long Minivan “Minivan (Long)” 1 Enter Cabin select mode Car type Display Select “SOUND” > “Setup” > “Cabin”. For how to select Function Control item, refer to (page 6). 2 Select the car type Turn the Control knob and push the center when the desired item is displayed. Exit Cabin select mode. . • You can compensate the distances in more details by using (page 26) function. Speaker setting The speaker X’Over is automatically set when the position and size of each speaker are selected from the following items; Item Range Speaker Size Front “O.E.M.”, “10cm”, “13cm”, “16cm”, “17cm”, “18cm”, “4x6”, “5x7”, “6x8”, “6x9”, “7x10” Speaker Location Front “Door”, “On Dash”, “Under Dash” Speaker Size Tweeter “None”, “Use” Speaker Size Rear “None”, “O.E.M.”, “10cm”, “13cm”, “16cm”, “17cm”, “18cm”, “4x6”, “5x7”, “6x8”, “6x9”, “7x10” Speaker Location Rear “Door”, “Rear Deck” “Minivan”, “Minivan (Long)”: “2nd Row”, “3rd Row” Speaker Size Subwoofer “None”, “16cm”, “20cm”, “25cm”, “30cm”, “38cm Over” Setting speaker Display 1 Enter Speaker setting mode Select “SOUND” > “Setup” > “Speaker”. For how to select Function Control item, refer to (page 6). 2 Select the speaker you want to set Front speaker “FRONT” Rear speaker “REAR" Subwoofer “SUB W" Turn the Control knob. 3 Select the item you want to set Item Setting overview “FRONT” >“SIZE” Speaker Size Front >“LOCATION” Speaker Location Front >“TWEETER” Speaker Select Tweeter “REAR" >“SIZE” Speaker Size Rear >“LOCATION” Speaker Location Rear “SUB W" >“SIZE” Speaker Size Subwoofer Push the Control knob towards up or down. 4 Set the value Turn the Control knob. 5 Repeat steps 2 to 4 to complete the speaker settings. 6 Exit Speaker setting mode Press the [FNC] button. English | 25 Sound Setup DTA (Digital Time Alignment) setting Adjusting fine tuning of the speaker position compensation value specified at (Page 25). 1 Enter DTA setting mode Select “SOUND” > “Setup” > “DTA”. For how to select Function Control item, refer to (page 6). 2 Select the speaker you want to set Front speaker “Front” Rear speaker “Rear" Subwoofer “SW" Setting speaker Display Turn the Control knob. 3 Set the compensation value of the speaker position Turn the Control knob and push the center when the desired value is displayed. Adjust between 0 and 440 cm. Refer to “DTA” of