Инструкция по эксплуатации Kenwood, модель KDC-X996
Производитель: KenwoodРазмер: 5.87 mbНазвание файла:
Язык инструкции:
Перейти к скачиванию
К этому устройству также есть другие инструкции:
Фрагмент инструкции
“OFF”/ “ON” “2 Zone Rear Volume”* Adjust the volume of Rear channel. “0” — “35” “2 Zone Select”* Specifies the destination of sub source sound when the Dual Zone function is turned on. “Rear”/ “Front” * The Dual Zone System is set to “ON”. ( : Factory setting) 1 Select the source Pressing the [SRC] button repeatedly switches source. Select a source other than “STANDBY”. . SRC Select mode 2: Press the [SRC] button and then turn the [VOL] knob. To determine the selected source, press the [VOL] knob. 2 Enter Audio Control mode Press the [VOL] knob. 3 Turn the [VOL] knob and press it when the desired item is displayed. Select “Pro Setup” > “Zone Control”. 4 Select the item you want to set Turn the [VOL] knob and press it when the desired item is displayed. 5 Exit Audio Control mode Press the [MENU] button for at least 1 second. . • Select Main source by [SRC] button. • Adjust the volume of Front channel by [VOL] knob. • The Audio Control has no effect on sub source. • There are following limitations when Dual Zone System is enabled. -There is no output from the subwoofer. -“Fader”, “Subwoofer Level” of (page 45) and DSP function are not available. English | 48 DSP Setup DSP Setup C MENU VOL 4. Car Type Selection You can compensate the delay of the sound arrival time by selecting your environment from the following car types. Display Overview “OFF” Not compensating. “Compact” Compact car “Full size car” Full size car “Wagon” Station wagon “Minivan” Minivan “SUV” Sport-utility vehicle “Minivan (Long)” Long Minivan ( : Factory setting) 1 Select the source Pressing the [SRC] button repeatedly switches source. Select a source other than “STANDBY”. . SRC Select mode 2: Press the [SRC] button and then turn the [VOL] knob. To determine the selected source, press the [VOL] knob. 2 Enter Audio Control mode Press the [VOL] knob. 3 Enter Car Type select mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Pro Setup” > “Car Type”. 4 Select the car type Turn the [VOL] knob. 5 Set the value Press the [VOL] button. 6 Exit Audio Control mode Press the [MENU] button for at least 1 second. . • You can compensate the distances in more details by using (page 51) function. 49 | KDC-X996/ KDC-BT952HD Speaker Setting The speaker X’Over is automatically set when the position and size of each speaker are selected from the following items. Speaker Item Range “Front” “SIZE” Speaker Size Front KDC-X996: “O.E.M.”, “3 1/2inch”, “4inch”, “4 3/4inch”, “5inch”, “6 1/2inch”, “6 3/4inch”, “7inch”, “4x6”, “5x7”, “6x8”, “6x9”, “7x10” KDC-BT952HD: “Small”, “Medium”, “Large” “LOCATION” Speaker Location Front “Door”, “On Dash”, “Under Dash” “TWEETER” Speaker Range Tweeter “None”, “Small”, “Middle”, “Large” “Rear” “SIZE” Speaker Size Rear KDC-X996: “None”, “O.E.M.”, “3 1/2inch”, “4inch”, “4 3/4inch”, “5inch”, “6 1/2inch”, “6 3/4inch”, “7inch”, “4x6”, “5x7”, “6x8”, “6x9”, “7x10” KDC-BT952HD: “None”, “Small”, “Medium”, “Large” “LOCATION” Speaker Location Rear • “Door”, “Rear Deck” • “2nd Row”, “3rd Row” (Car Type: “Minivan”, “Minivan (Long)”) “SubWoofer” “SIZE” Speaker Size Subwoofer KDC-X996: “None”, “6 1/2inch”, “8inch”, “10inch”, “12inch”, “15inch Over” KDC-BT952HD: “None”, “Small”, “Large” ( : Factory setting) 1 Select the source Pressing the [SRC] button repeatedly switches source. Select a source other than “STANDBY”. . SRC Select mode 2: Press the [SRC] button and then turn the [VOL] knob. To determine the selected source, press the [VOL] knob. 2 Enter Audio Control mode Press the [VOL] knob. 3 Enter Speaker setting mode Turn the [VOL] knob and press it when the desired item is displayed. Select “Pro Setup” > “Speaker Setting”. 4 Select the setting item to adjust Turn the [VOL] knob and press it when the desired item is displayed. 5 Make a setting Turn the [VOL] knob to select a setting value, and then press the [VOL] knob. 6 Exit Audio Control mode Press the [MENU] button for at least 1 second. X’Over Setting Fine adjusting the following setting values corresponding to the X’Over values set in the section (page 49). Display Item Range “X’Over” “Front” “FC” Front High Pass Filter Through, 30*, 40, 50*, 60, 70, 80, 90*, 100, 120, 150, 180, 220, 250* (Hz) “SLOPE”* Front High Pass Slope -6, -12, -18, -24 dB/Oct “GAIN” Front Gain 0, -1, -2, -3, -4, -5, -6, -7, -8 dB “Rear” “FC” Rear High Pass Filter Through, 30*, 40, 50*, 60, 70, 80, 90*, 100, 120, 150, 180, 220, 250* (Hz) “SLOPE”* Rear High Pass Slope -6, -12, -18, -24 dB/Oct “GAIN” Rear Gain 0, -1, -2, -3, -4, -5, -6, -7, -8 dB “SubWoofer” “FC” Subwoofer Low Pass Filter 30*, 40, 50*, 60, 70, 80, 90*, 100, 120, 150, 180, 220, 250*, Through (Hz) “SLOPE”* Subwoofer Slope -6, -12, -18, -24 dB/Oct “GAIN” Subwoofer Gain 0, -1, -2, -3, -4, -5, -6, -7, -8 dB “PHASE” Subwoofer Phase Reverse (180°)/ Normal (0°) “Tweeter”* “FC” Tweeter High Pass Filter 1, 1.6, 2.5, 4, 5, 6.3, 8, 10, 12.5 (kHz) “Volume” Tweete V...
Эта инструкция также подходит к моделям:
Автомагнитолы - KDC-BT952HD (5.87 mb)
)
