Оценок - 1, средний балл: 3
(
)
)
|
Фрагмент инструкции
Select the source sound to be output from the Dual zone channel. 2 Select the key function section Press the [NEXT] button. Repeatedly press the button until "2-ZN" is displayed above the [5]/ [2] button. Refer to 'Notes on Multi-function Key System' (page 9). 3 Enter the Dual Zone System Control mode Press the [5] ("2-ZN") (KDC-MP925/X879)/ [2] ("2-ZN") (KDC-X979) button. 4 Select the item for adjustment Press the desired [2] — [3] button. Each time the button is pressed the items that can be adjusted switch as shown below. Adjustment Item Button Display Range Dual Zone System [2] "ON/OFF" ON/OFF Dual Zone System Front & Rear [3] "F j R" Front/Rear Dual Zone System Rear: The front is this unit’s internal source, and the rear is selected source sound. Dual Zone System Front: The rear is this unit’s internal source, and the front is selected source sound. 5 Exit the Dual Zone System Control mode Press the [6] ("RTN") button. 6 Select the source Press the [SRC] button. Select the source sound to be output from the internal source channel. • The Dual Zone System can be used with the sources shown below. - Internal auxiliary input - KCA-S210A - CA-C1AX - External disc changer/ player - SIRIUS satellite radio tuner • While Dual Zone System is ON, the setting of Dual Zone System Front or Rear is disabled. Set Dual Zone System Front or Rear first, and then set the Dual Zone System to ON. • When the Dual Zone System is ON, there is no Dual zone channel audio control or other effect. • When you use the Dual Zone System by selecting the optional accessory source for the output of the Dual zone channel, you cannot select another optional accessory source as the source for the Internal source channel. • When "SRS WOW" is selected at 'System Q' (KDCMP925/ X879) (page 24) the Dual Zone System cannot be turned on and off. Also set all the 'Audio Control' (KDC-MP925/ X879) (page 22) WOW items to OFF. The Dual Zone System cannot be turned on and off if even one of the items is set to ON. • The Dual Zone System cannot be used if a DAB control unit is connected. • When the 'Dual Zone System' is ON, each of the following setup is ignored. - "WOW"/ "PLII"/ "POSI"/ "PHASE" ('Audio control' (KDC-X979) (page 26)) - "X'over"/ "EQ"/ "DTA" ('Audio Setup (PRO mode)' (page 28)) - System Q ('System Q' (KDC-X979) (page 24)) - WOW/ X'OVER ('Audio Control' (KDC-MP925/X879) (page 22)) • The Dual Zone System can be used only when you have set the rear speaker to any mode other than "None" in the 'Audio Setup (Easy mode)' (page 28). 26 | English Sound management features Function of the KDC-X979 Audio control 1 Select the source for adjustment Press the [SRC] button. 2 Select the key function section Press the [NEXT] button. Repeatedly press the button until "AD CTRL" is displayed above the [2] button. Refer to 'Notes on Multi-function Key System' (page 9). 3 Enter Audio Control mode Press the [2] ("AD CTRL") button. 4 Select the Adjustment item section Press the [NEXT] button. Repeatedly press the button until the desired Adjustment item is displayed above the [2] — [5] button. 5 Select the Audio Control item for adjustment Press the [2] — [5] button. Each time the [2] — [5] button is pressed the adjustable audio items are switched among ranges of all stage section’s tables on the following pages. 1st section Multi-function key..operation Audio control item [2] "PLII" Dolby ProLogic II setting [3] "WOW" SRS WOW setting [4] "OFF" OFF setting [5] "FINE" [2] "PNRM" [3] "DIM" [4] "CT-WDTH" Panorama setting Dimension control Center width control [2] "FOCUS" [3] "TruBass-F" [3] "TruBass-R" [4] "SRS 3D" FOCUS setting SRS TruBass Front setting SRS TruBass Rear setting SRS 3D setting • When you select the "MUSIC" using "PLII", you can set the "PNRM", "DIM" and "CT-WDTH" using the "FINE" function. Also, when you select the "WOW", you can set the "FOCUS", "TruBass-F/TruBass-R", and "SRS 3D" using the "FINE" function. 1 - 6 NEXT SRC 4 . English | 27 [2] "PLII" "MUSIC" (Music) [5] "FINE" "MOVIE" (Movie) "MATRIX" (Matrix) [2] "PNRM" [3] "DIM" [4] "CT-WDTH" [3] "WOW" "LOW" (Low) [5] "FINE" "MIDDLE" (Middle) "HIGH" (High) [2] "FOCUS" [3] "TruBass-F" [3] "TruBass-R" "USER" (User) [4] "SRS 3D" 2nd section Multi-function key..operation Audio control item [2] "POSI" Position setting [3] "BL/F" [3] "BL" [3] "F" Balance setting Fader setting [4] "VOFF" Volume offset [5] "SW"* [5] "SW LEVEL" [5] "PHASE" Subwoofer level Subwoofer Phase setting • Volume offset: Each source’s volume can be set as a difference from the basic volume. • * You can control this item when 'Subwoofer Output' (page 23) is set to "SUB WOOFER ON". Note that you can control it only when "SP-LEV" is set to any item other than "None" by 'Audio Setup (Easy mode)' (page28). 6 Adjust the Audio Control item Press the [4] or [.] button. Each time the button is pressed the setting switches as shown below. 1st section Audio Control Item Range Dolby ProLogic II setting MUSIC/ MOVIE/ MATRIX SRS WOW settin...
Эта инструкция также подходит к моделям:Автомагнитолы - KDC-MP925 (940.56 kb)
Автомагнитолы - KDC-X879 (940.56 kb)